[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4206b06e8d74911e2827a26cc7346e7e89ca24c3.camel@intel.com>
Date: Thu, 29 Nov 2018 11:03:01 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: Steve Douthit <stephend@...icom-usa.com>
Cc: "David S. Miller" <davem@...emloft.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next 0/2] Add mii_bus to ixgbe driver for dsa devs
On Thu, 2018-11-29 at 18:54 +0000, Steve Douthit wrote:
> Most dsa devices currently expect to get a pointer to a mii_bus from
> platform data of device tree information.
>
> The first patch exposes a mii_bus for ixgbe devices.
>
> Currently the ixgbe driver only allows accesses to the probed PHY
> address via ioctls. The second patch changes that behavior to allow
> access to all addresses. This should be useful for doing switch peeks &
> pokes from userspace for development, test, or if theres no dsa driver
> for a particular switch yet.
>
> I've tested the clause 22 portion of this code on a board that has an
> Intel C3xxx series SoC connected to a Marvell Peridot switch. I don't
> have any clause 45 devices or other ixgbe devices to test with.
>
> Stephen Douthit (2):
> ixgbe: register a mdiobus
> ixgbe: use mii_bus to handle MII related ioctls
>
> drivers/net/ethernet/intel/ixgbe/ixgbe.h | 2 +
> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 35 ++--
> drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 192 ++++++++++++++++++
> drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 2 +
> 4 files changed, 216 insertions(+), 15 deletions(-)
>
I will add these changes to my queue, please remember to send patches
against the drivers in drivers/net/ethernet/intel/* to
intel-wired-lan@...ts.osuosl.org mailing list as well, so that our
patchwork project can track the patches.
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists