netdev - [PATCH net-next v3 2/2] ixgbe: use mii_bus to handle MII related ioctls

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20181203185454.6357-3-stephend@silicom-usa.com>
Date:   Mon, 3 Dec 2018 18:55:26 +0000
From:   Steve Douthit <stephend@...icom-usa.com>
To:     Jeff Kirsher <jeffrey.t.kirsher@...el.com>
CC:     "David S. Miller" <davem@...emloft.net>,
        "intel-wired-lan@...ts.osuosl.org" <intel-wired-lan@...ts.osuosl.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Steve Douthit <stephend@...icom-usa.com>
Subject: [PATCH net-next v3 2/2] ixgbe: use mii_bus to handle MII related
 ioctls

Use the mii_bus callbacks to address the entire clause 22/45 address
space.  Enables userspace to poke switch registers instead of a single
PHY address.

The ixgbe firmware may be polling PHYs in a way that is not protected by
the mii_bus lock.  This isn't new behavior, but as Andrew Lunn pointed
out there are more addresses available for conflicts.

Signed-off-by: Stephen Douthit <stephend@...icom-usa.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 82af3b24d222..fb066c491abe 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -8790,6 +8790,15 @@ ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr)
 	u16 value;
 	int rc;
 
+	if (adapter->mii_bus) {
+		int regnum = addr;
+
+		if (devad != MDIO_DEVAD_NONE)
+			regnum |= (devad << 16) | MII_ADDR_C45;
+
+		return mdiobus_read(adapter->mii_bus, prtad, regnum);
+	}
+
 	if (prtad != hw->phy.mdio.prtad)
 		return -EINVAL;
 	rc = hw->phy.ops.read_reg(hw, addr, devad, &value);
@@ -8804,6 +8813,15 @@ static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad,
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
+	if (adapter->mii_bus) {
+		int regnum = addr;
+
+		if (devad != MDIO_DEVAD_NONE)
+			regnum |= (devad << 16) | MII_ADDR_C45;
+
+		return mdiobus_write(adapter->mii_bus, prtad, regnum, value);
+	}
+
 	if (prtad != hw->phy.mdio.prtad)
 		return -EINVAL;
 	return hw->phy.ops.write_reg(hw, addr, devad, value);
-- 
2.17.2