netdev - [PATCH net 4/4] mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 6 Dec 2018 17:44:53 +0000
From:   Ido Schimmel <idosch@...lanox.com>
To:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "davem@...emloft.net" <davem@...emloft.net>,
        Jiri Pirko <jiri@...lanox.com>, Nir Dotan <nird@...lanox.com>,
        Petr Machata <petrm@...lanox.com>,
        Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net 4/4] mlxsw: spectrum_switchdev: Fix VLAN device deletion
 via ioctl

When deleting a VLAN device using an ioctl the netdev is unregistered
before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can
lead to a use-after-free in mlxsw in case the VLAN device is deleted
while being enslaved to a bridge.

The reason for the above is that when mlxsw receives the CHANGEUPPER
event, it wrongly assumes that the VLAN device is no longer its upper
and thus destroys the internal representation of the bridge port despite
the reference count being non-zero.

Fix this by checking if the VLAN device is our upper using its real
device. In net-next I'm going to remove this trick and instead make
mlxsw completely agnostic to the order of the events.

Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
Reviewed-by: Petr Machata <petrm@...lanox.com>
---
 .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 7f2091c2648e..50080c60a279 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -296,7 +296,13 @@ static bool
 mlxsw_sp_bridge_port_should_destroy(const struct mlxsw_sp_bridge_port *
 				    bridge_port)
 {
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_port->dev);
+	struct net_device *dev = bridge_port->dev;
+	struct mlxsw_sp *mlxsw_sp;
+
+	if (is_vlan_dev(dev))
+		mlxsw_sp = mlxsw_sp_lower_get(vlan_dev_real_dev(dev));
+	else
+		mlxsw_sp = mlxsw_sp_lower_get(dev);
 
 	/* In case ports were pulled from out of a bridged LAG, then
 	 * it's possible the reference count isn't zero, yet the bridge
@@ -2109,7 +2115,7 @@ mlxsw_sp_bridge_8021d_port_leave(struct mlxsw_sp_bridge_device *bridge_device,
 
 	vid = is_vlan_dev(dev) ? vlan_dev_vlan_id(dev) : 1;
 	mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_find_by_vid(mlxsw_sp_port, vid);
-	if (WARN_ON(!mlxsw_sp_port_vlan))
+	if (!mlxsw_sp_port_vlan)
 		return;
 
 	mlxsw_sp_port_vlan_bridge_leave(mlxsw_sp_port_vlan);
-- 
2.19.1