netdev - [PATCH net-next 7/9] mlxsw: spectrum

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20181210071056.3836-8-idosch@mellanox.com>
Date:   Mon, 10 Dec 2018 07:11:44 +0000
From:   Ido Schimmel <idosch@...lanox.com>
To:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "davem@...emloft.net" <davem@...emloft.net>,
        Jiri Pirko <jiri@...lanox.com>, Nir Dotan <nird@...lanox.com>,
        Petr Machata <petrm@...lanox.com>,
        Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next 7/9] mlxsw: spectrum_acl: Limit priority value

From: Nir Dotan <nird@...lanox.com>

In Spectrum-2, higher priority value wins and priority valid values are in
the range of {1,cap_kvd_size-1}. mlxsw_sp_acl_tcam_priority_get converts
from lower-bound priorities alike tc flower to Spectrum-2 HW range. Up
until now tc flower did not provide priority 0 or reached the maximal
value, however multicast routing does provide priority 0.

Therefore, Change mlxsw_sp_acl_tcam_priority_get to verify priority is in
the correct range. Make sure priority is never set to zero and never
exceeds the maximal allowed value.

Signed-off-by: Nir Dotan <nird@...lanox.com>
Reviewed-by: Jiri Pirko <jiri@...lanox.com>
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c
index f1f98a1770d2..fe230acf92a9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c
@@ -95,8 +95,9 @@ int mlxsw_sp_acl_tcam_priority_get(struct mlxsw_sp *mlxsw_sp,
 	if (!MLXSW_CORE_RES_VALID(mlxsw_sp->core, KVD_SIZE))
 		return -EIO;
 
-	max_priority = MLXSW_CORE_RES_GET(mlxsw_sp->core, KVD_SIZE);
-	if (rulei->priority > max_priority)
+	/* Priority range is 1..cap_kvd_size-1. */
+	max_priority = MLXSW_CORE_RES_GET(mlxsw_sp->core, KVD_SIZE) - 1;
+	if (rulei->priority >= max_priority)
 		return -EINVAL;
 
 	/* Unlike in TC, in HW, higher number means higher priority. */
-- 
2.19.1