netdev - [net 5/9] net/mlx5e: Avoid overriding the user provided priority for offloaded tc rules

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 13 Dec 2018 08:45:34 -0800
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Or Gerlitz <ogerlitz@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>
Subject: [net 5/9] net/mlx5e: Avoid overriding the user provided priority for offloaded tc rules

From: Or Gerlitz <ogerlitz@...lanox.com>

Just a leftover which was wrongly left there, remove it while spawning
a message to suggest firmware upgrade.

Fixes: bf07aa730a04 ('net/mlx5e: Support offloading tc priorities and chains for eswitch flows')
Signed-off-by: Or Gerlitz <ogerlitz@...lanox.com>
Reviewed-by: Paul Blakey <paulb@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 1f01c905a042..e6170ddf2cc4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -907,11 +907,10 @@ mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv,
 	struct mlx5e_priv *out_priv;
 	int err = 0, encap_err = 0;
 
-	/* if prios are not supported, keep the old behaviour of using same prio
-	 * for all offloaded rules.
-	 */
-	if (!mlx5_eswitch_prios_supported(esw))
-		attr->prio = 1;
+	if (!mlx5_eswitch_prios_supported(esw) && attr->prio != 1) {
+		NL_SET_ERR_MSG(extack, "E-switch priorities unsupported, upgrade FW");
+		return -EOPNOTSUPP;
+	}
 
 	if (attr->chain > max_chain) {
 		NL_SET_ERR_MSG(extack, "Requested chain is out of supported range");
-- 
2.19.2