| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181218190641.31883-5-vivien.didelot@gmail.com>
Date: Tue, 18 Dec 2018 14:06:38 -0500
From: Vivien Didelot <vivien.didelot@...il.com>
To: netdev@...r.kernel.org
Cc: Chris Healy <cphealy@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
"John W . Linville" <linville@...driver.com>, f.fainelli@...il.com,
andrew@...n.ch
Subject: [PATCH v2 4/7] ethtool: dsa: mv88e6xxx: add pretty dump for 88E6161
This patch adds support for pretty dump the port registers of the
88E6161 and 88E6123 switches, which both share the same datasheet.
Signed-off-by: Vivien Didelot <vivien.didelot@...il.com>
---
dsa.c | 164 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 164 insertions(+)
diff --git a/dsa.c b/dsa.c
index c7e3dd1..ab21d01 100644
--- a/dsa.c
+++ b/dsa.c
@@ -30,6 +30,168 @@
((_val) & 0x4000) ? "14 " : "", \
((_val) & 0x8000) ? "15 " : "")
+static void dsa_mv88e6161(int reg, u16 val)
+{
+ switch (reg) {
+ case 0:
+ REG(reg, "Port Status", val);
+ FIELD("Pause Enabled", "%u", !!(val & 0x8000));
+ FIELD("My Pause", "%u", !!(val & 0x4000));
+ FIELD("Half-duplex Flow Control", "%u", !!(val & 0x2000));
+ FIELD("802.3 PHY Detected", "%u", !!(val & 0x1000));
+ FIELD("Link Status", "%s", val & 0x0800 ? "Up" : "Down");
+ FIELD("Duplex", "%s", val & 0x0400 ? "Full" : "Half");
+ FIELD("Speed", "%s",
+ (val & 0x0300) == 0x0000 ? "10 Mbps" :
+ (val & 0x0300) == 0x0100 ? "100 Mbps" :
+ (val & 0x0300) == 0x0200 ? "1000 Mbps" :
+ (val & 0x0300) == 0x0300 ? "Reserved" : "?");
+ FIELD("Auto-Media Detect Disable", "%u", !!(val & 0x0040));
+ FIELD("Transmitter Paused", "%u", !!(val & 0x0020));
+ FIELD("Flow Control", "%u", !!(val & 0x0010));
+ FIELD("Config Duplex", "%s", val & 0x0008 ? "Full" : "Half");
+ FIELD("Config Mode", "0x%x", val & 0x0007);
+ break;
+ case 1:
+ REG(reg, "PCS Control", val);
+ FIELD("Flow Control's Forced value", "%u", !!(val & 0x0080));
+ FIELD("Force Flow Control", "%u", !!(val & 0x0040));
+ FIELD("Link's Forced value", "%s", val & 0x0020 ? "Up" : "Down");
+ FIELD("Force Link", "%u", !!(val & 0x0010));
+ FIELD("Duplex's Forced value", "%s", val & 0x0008 ? "Full" : "Half");
+ FIELD("Force Duplex", "%u", !!(val & 0x0004));
+ FIELD("Force Speed", "%s",
+ (val & 0x0003) == 0x0000 ? "10 Mbps" :
+ (val & 0x0003) == 0x0001 ? "100 Mbps" :
+ (val & 0x0003) == 0x0002 ? "1000 Mbps" :
+ (val & 0x0003) == 0x0003 ? "Not forced" : "?");
+ break;
+ case 2:
+ REG(reg, "Jamming Control", val);
+ break;
+ case 3:
+ REG(reg, "Switch Identifier", val);
+ break;
+ case 4:
+ REG(reg, "Port Control", val);
+ FIELD("Source Address Filtering controls", "%s",
+ (val & 0xc000) == 0x0000 ? "Disabled" :
+ (val & 0xc000) == 0x4000 ? "Drop On Lock" :
+ (val & 0xc000) == 0x8000 ? "Drop On Unlock" :
+ (val & 0xc000) == 0xc000 ? "Drop to CPU" : "?");
+ FIELD("Egress Mode", "%s",
+ (val & 0x3000) == 0x0000 ? "Unmodified" :
+ (val & 0x3000) == 0x1000 ? "Untagged" :
+ (val & 0x3000) == 0x2000 ? "Tagged" :
+ (val & 0x3000) == 0x3000 ? "Reserved" : "?");
+ FIELD("Ingress & Egress Header Mode", "%u", !!(val & 0x0800));
+ FIELD("IGMP and MLD Snooping", "%u", !!(val & 0x0400));
+ FIELD("Frame Mode", "%s",
+ (val & 0x0300) == 0x0000 ? "Normal" :
+ (val & 0x0300) == 0x0100 ? "DSA" :
+ (val & 0x0300) == 0x0200 ? "Provider" :
+ (val & 0x0300) == 0x0300 ? "Ether Type DSA" : "?");
+ FIELD("VLAN Tunnel", "%u", !!(val & 0x0080));
+ FIELD("TagIfBoth", "%u", !!(val & 0x0040));
+ FIELD("Initial Priority assignment", "%s",
+ (val & 0x0030) == 0x0000 ? "Defaults" :
+ (val & 0x0030) == 0x0010 ? "Tag Priority" :
+ (val & 0x0030) == 0x0020 ? "IP Priority" :
+ (val & 0x0030) == 0x0030 ? "Tag & IP Priority" : "?");
+ FIELD("Egress Flooding mode", "%s",
+ (val & 0x000c) == 0x0000 ? "No unknown DA" :
+ (val & 0x000c) == 0x0004 ? "No unknown multicast DA" :
+ (val & 0x000c) == 0x0008 ? "No unknown unicast DA" :
+ (val & 0x000c) == 0x000c ? "Allow unknown DA" : "?");
+ FIELD("Port State", "%s",
+ (val & 0x0003) == 0x0000 ? "Disabled" :
+ (val & 0x0003) == 0x0001 ? "Blocking/Listening" :
+ (val & 0x0003) == 0x0002 ? "Learning" :
+ (val & 0x0003) == 0x0003 ? "Forwarding" : "?");
+ break;
+ case 5:
+ REG(reg, "Port Control 1", val);
+ FIELD("Message Port", "%u", !!(val & 0x8000));
+ FIELD("Trunk Port", "%u", !!(val & 0x4000));
+ FIELD("Trunk ID", "%u", (val & 0x0f00) >> 8);
+ FIELD("FID[5:4]", "0x%.2x", (val & 0x0003) << 4);
+ break;
+ case 6:
+ REG(reg, "Port Base VLAN Map (Header)", val);
+ FIELD("FID[3:0]", "0x%.2x", (val & 0xf000) >> 12);
+ FIELD_BITMAP("VLANTable", val & 0x003f);
+ break;
+ case 7:
+ REG(reg, "Default VLAN ID & Priority", val);
+ FIELD("Default Priority", "0x%x", (val & 0xe000) >> 13);
+ FIELD("Force to use Default VID", "%u", !!(val & 0x1000));
+ FIELD("Default VLAN Identifier", "%u", val & 0x0fff);
+ break;
+ case 8:
+ REG(reg, "Port Control 2", val);
+ FIELD("Force good FCS in the frame", "%u", !!(val & 0x8000));
+ FIELD("Jumbo Mode", "%s",
+ (val & 0x3000) == 0x0000 ? "1522" :
+ (val & 0x3000) == 0x1000 ? "2048" :
+ (val & 0x3000) == 0x2000 ? "10240" :
+ (val & 0x3000) == 0x3000 ? "Reserved" : "?");
+ FIELD("802.1QMode", "%s",
+ (val & 0x0c00) == 0x0000 ? "Disabled" :
+ (val & 0x0c00) == 0x0400 ? "Fallback" :
+ (val & 0x0c00) == 0x0800 ? "Check" :
+ (val & 0x0c00) == 0x0c00 ? "Secure" : "?");
+ FIELD("Discard Tagged Frames", "%u", !!(val & 0x0200));
+ FIELD("Discard Untagged Frames", "%u", !!(val & 0x0100));
+ FIELD("Map using DA hits", "%u", !!(val & 0x0080));
+ FIELD("ARP Mirror enable", "%u", !!(val & 0x0040));
+ FIELD("Egress Monitor Source Port", "%u", !!(val & 0x0020));
+ FIELD("Ingress Monitor Source Port", "%u", !!(val & 0x0010));
+ break;
+ case 9:
+ REG(reg, "Egress Rate Control", val);
+ break;
+ case 10:
+ REG(reg, "Egress Rate Control 2", val);
+ break;
+ case 11:
+ REG(reg, "Port Association Vector", val);
+ break;
+ case 12:
+ REG(reg, "Port ATU Control", val);
+ break;
+ case 13:
+ REG(reg, "Priority Override", val);
+ break;
+ case 15:
+ REG(reg, "PortEType", val);
+ break;
+ case 16:
+ REG(reg, "InDiscardsLo Frame Counter", val);
+ break;
+ case 17:
+ REG(reg, "InDiscardsHi Frame Counter", val);
+ break;
+ case 18:
+ REG(reg, "InFiltered Frame Counter", val);
+ break;
+ case 19:
+ REG(reg, "OutFiltered Frame Counter", val);
+ break;
+ case 24:
+ REG(reg, "Tag Remap 0-3", val);
+ break;
+ case 25:
+ REG(reg, "Tag Remap 4-7", val);
+ break;
+ case 27:
+ REG(reg, "Queue Counters", val);
+ break;
+ default:
+ REG(reg, "Reserved", val);
+ break;
+ }
+}
+
static void dsa_mv88e6185(int reg, u16 val)
{
switch (reg) {
@@ -97,6 +259,8 @@ struct dsa_mv88e6xxx_switch {
};
static const struct dsa_mv88e6xxx_switch dsa_mv88e6xxx_switches[] = {
+ { .id = 0x1210, .name = "88E6123 ", .dump = dsa_mv88e6161 },
+ { .id = 0x1610, .name = "88E6161 ", .dump = dsa_mv88e6161 },
{ .id = 0x1a70, .name = "88E6185 ", .dump = dsa_mv88e6185 },
};
--
2.20.1
Powered by blists - more mailing lists