[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181220205634.8509-4-jeffrey.t.kirsher@intel.com>
Date: Thu, 20 Dec 2018 12:56:27 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Vinicius Costa Gomes <vinicius.gomes@...el.com>,
netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 03/10] Documentation: igb: Add a section about CBS
From: Vinicius Costa Gomes <vinicius.gomes@...el.com>
Add some pointers to the definition of the CBS algorithm, and some
notes about the limits of its implementation in the i210 family of
controllers.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
.../networking/device_drivers/intel/igb.rst | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/Documentation/networking/device_drivers/intel/igb.rst b/Documentation/networking/device_drivers/intel/igb.rst
index ba16b86d5593..e87a4a72ea2d 100644
--- a/Documentation/networking/device_drivers/intel/igb.rst
+++ b/Documentation/networking/device_drivers/intel/igb.rst
@@ -177,6 +177,25 @@ rate limit using the IProute2 tool. Download the latest version of the
IProute2 tool from Sourceforge if your version does not have all the features
you require.
+Credit Based Shaper (Qav Mode)
+------------------------------
+When enabling the CBS qdisc in the hardware offload mode, traffic shaping using
+the CBS (described in the IEEE 802.1Q-2018 Section 8.6.8.2 and discussed in the
+Annex L) algorithm will run in the i210 controller, so it's more accurate and
+uses less CPU.
+
+When using offloaded CBS, and the traffic rate obeys the configured rate
+(doesn't go above it), CBS should have little to no effect in the latency.
+
+The offloaded version of the algorithm has some limits, caused by how the idle
+slope is expressed in the adapter's registers. It can only represent idle slopes
+in 16.38431 kbps units, which means that if a idle slope of 2576kbps is
+requested, the controller will be configured to use a idle slope of ~2589 kbps,
+because the driver rounds the value up. For more details, see the comments on
+:c:func:`igb_config_tx_modes()`.
+
+NOTE: This feature is exclusive to i210 models.
+
Support
=======
--
2.19.2
Powered by blists - more mailing lists