netdev - [PATCH v1 net] net: dsa: microchip: fix unicast frame leak

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1545274771-22589-1-git-send-email-Tristram.Ha@microchip.com>
Date:   Wed, 19 Dec 2018 18:59:31 -0800
From:   <Tristram.Ha@...rochip.com>
To:     "David S. Miller" <davem@...emloft.net>,
        Sergio Paracuellos <sergio.paracuellos@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        "Florian Fainelli" <f.fainelli@...il.com>,
        Marek Vasut <marex@...x.de>
CC:     Tristram Ha <Tristram.Ha@...rochip.com>,
        Pavel Machek <pavel@....cz>,
        "Dan Carpenter" <dan.carpenter@...cle.com>,
        <vivien.didelot@...oirfairelinux.com>,
        <UNGLinuxDriver@...rochip.com>, <netdev@...r.kernel.org>
Subject: [PATCH v1 net] net: dsa: microchip: fix unicast frame leak

From: Tristram Ha <Tristram.Ha@...rochip.com>

Port partitioning is done by enabling UNICAST_VLAN_BOUNDARY and changing
the default port membership of 0x7f to other values such that there is
no communication between ports.  In KSZ9477 the member for port 1 is
0x41; port 2, 0x42; port 3, 0x44; port 4, 0x48; port 5, 0x50; and port 7,
0x60.  Port 6 is the host port.

Setting a zero value can be used to stop port from receiving.

However, when UNICAST_VLAN_BOUNDARY is disabled and the unicast addresses
are already learned in the dynamic MAC table, setting zero still allows
devices connected to those ports to communicate.  This does not apply to
multicast and broadcast addresses though.  To prevent these leaks and
make the function of port membership consistent UNICAST_VLAN_BOUNDARY
should never be disabled.

Note that UNICAST_VLAN_BOUNDARY is enabled by default in KSZ9477.

Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <Tristram.Ha@...rochip.com>
---
v1
- Fix only UNICAST_VLAN_BOUNDARY issue
- Describe what UNICAST_VLAN_BOUNDARY does

 drivers/net/dsa/microchip/ksz9477.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 57a146a..89ed059 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -500,13 +500,9 @@ static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
 	if (flag) {
 		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
 			     PORT_VLAN_LOOKUP_VID_0, true);
-		ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
-			      true);
 		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
 	} else {
 		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
-		ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
-			      false);
 		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
 			     PORT_VLAN_LOOKUP_VID_0, false);
 	}
@@ -1130,6 +1126,10 @@ static int ksz9477_setup(struct dsa_switch *ds)
 		return ret;
 	}
 
+	/* Required for port partitioning. */
+	ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
+		      true);
+
 	/* accept packet up to 2000bytes */
 	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
 
-- 
1.9.1