netdev - Re: [PATCH] smsc95xx: Add support for automated PHY address detection

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20181223102329.GA32178@lunn.ch>
Date:   Sun, 23 Dec 2018 11:23:29 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Marek Vasut <marex@...x.de>
Cc:     linux-usb@...r.kernel.org,
        "David S . Miller" <davem@...emloft.net>,
        Nisar Sayed <Nisar.Sayed@...rochip.com>,
        Woojung Huh <Woojung.Huh@...rochip.com>,
        netdev <netdev@...r.kernel.org>,
        Florian Fainelli <f.fainelli@...il.com>
Subject: Re: [PATCH] smsc95xx: Add support for automated PHY address detection

> > +static int smsc95xx_phy_address(struct usbnet *dev)
> > +{
> > +	u32 read_buf;
> > +	int ret, id1, id2, phyad;
> > +
> > +	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	/* Check if using external PHY, if not, use internal PHY address */
> > +	if (!(read_buf & HW_CFG_PSEL_))
> > +		return SMSC95XX_INTERNAL_PHY_ID;
> > +
> > +	/*
> > +	 * Detect external PHY address. Here we probe the MDIO bus from
> > +	 * the highest address, since some PHYs respond also on address
> > +	 * zero, which they consider MDIO broadcast address. We really
> > +	 * want to get their proper address instead though, so we scan
> > +	 * address zero last.
> > +	 */
> > +	for (phyad = 0x1f; phyad >= 0; phyad--) {
> > +		id1 = smsc95xx_mdio_read(dev->net, phyad, MII_PHYSID1);
> > +		id2 = smsc95xx_mdio_read(dev->net, phyad, MII_PHYSID2);
> > +		/* Check for valid response from the PHY */
> > +		if (id1 > 0 && id2 > 0 && id1 != 0x7fff && id2 != 0xffff)
> > +			return phyad;
> > +	}

This would be so much easier if the driver used the core mdio/phy
code. Just set mdio->phy_mask to ~BIT(0) and then use
phy_find_first().

Anyway, net is closed at the moment, so please repost in three weeks
time.

	Andrew