[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190108162926.17806-6-vkoul@kernel.org>
Date: Tue, 8 Jan 2019 21:59:26 +0530
From: Vinod Koul <vkoul@...nel.org>
To: David S Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Niklas Cassel <niklas.cassel@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Vinod Koul <vkoul@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH v2 5/5] net: dsa: qca8k: disable delay for RGMII mode
In RGMII mode we should not have any delay in phy, so disable
the delay.
Signed-off-by: Vinod Koul <vkoul@...nel.org>
---
drivers/net/dsa/qca8k.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 7e97e620bd44..a4b6cda38016 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -420,7 +420,7 @@ qca8k_mib_init(struct qca8k_priv *priv)
static int
qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
{
- u32 reg;
+ u32 reg, val;
switch (port) {
case 0:
@@ -439,17 +439,9 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
*/
switch (mode) {
case PHY_INTERFACE_MODE_RGMII:
- qca8k_write(priv, reg,
- QCA8K_PORT_PAD_RGMII_EN |
- QCA8K_PORT_PAD_RGMII_TX_DELAY(3) |
- QCA8K_PORT_PAD_RGMII_RX_DELAY(3));
-
- /* According to the datasheet, RGMII delay is enabled through
- * PORT5_PAD_CTRL for all ports, rather than individual port
- * registers
- */
- qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ /* RGMII mode means no delay so don't enable the delay */
+ val = QCA8K_PORT_PAD_RGMII_EN;
+ qca8k_write(priv, reg, val);
break;
case PHY_INTERFACE_MODE_SGMII:
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
--
2.20.1
Powered by blists - more mailing lists