lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190108164732.4024-7-idosch@mellanox.com>
Date:   Tue, 8 Jan 2019 16:48:08 +0000
From:   Ido Schimmel <idosch@...lanox.com>
To:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "davem@...emloft.net" <davem@...emloft.net>,
        Jiri Pirko <jiri@...lanox.com>,
        Petr Machata <petrm@...lanox.com>,
        Nir Dotan <nird@...lanox.com>, mlxsw <mlxsw@...lanox.com>,
        Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net 06/11] mlxsw: spectrum_nve: Replace error code with EINVAL

Adding a VLAN on a port can trigger the offload of a VXLAN tunnel which
is already a member in the VLAN. In case the configuration of the VXLAN
is not supported, the driver would return -EOPNOTSUPP.

This is problematic since bridge code does not interpret this as error,
but rather that it should try to setup the VLAN using the 8021q driver
instead of switchdev.

Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges")
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
Reviewed-by: Petr Machata <petrm@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c
index 0a31fff2516e..fb1c48c698f2 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c
@@ -816,14 +816,14 @@ int mlxsw_sp_nve_fid_enable(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_fid *fid,
 	ops = nve->nve_ops_arr[params->type];
 
 	if (!ops->can_offload(nve, params->dev, extack))
-		return -EOPNOTSUPP;
+		return -EINVAL;
 
 	memset(&config, 0, sizeof(config));
 	ops->nve_config(nve, params->dev, &config);
 	if (nve->num_nve_tunnels &&
 	    memcmp(&config, &nve->config, sizeof(config))) {
 		NL_SET_ERR_MSG_MOD(extack, "Conflicting NVE tunnels configuration");
-		return -EOPNOTSUPP;
+		return -EINVAL;
 	}
 
 	err = mlxsw_sp_nve_tunnel_init(mlxsw_sp, &config);
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ