| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMhs-H9T-oGqnHg76L1EsH8oOzKnu1+ZKtJTvR1VUWghjEK0-g@mail.gmail.com>
Date: Thu, 17 Jan 2019 10:36:26 +0100
From: Sergio Paracuellos <sergio.paracuellos@...il.com>
To: Tristram.Ha@...rochip.com
Cc: Marek Vasut <marex@...x.de>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Pavel Machek <pavel@....cz>,
Dan Carpenter <dan.carpenter@...cle.com>,
vivien.didelot@...oirfairelinux.com, UNGLinuxDriver@...rochip.com,
netdev@...r.kernel.org
Subject: Re: [PATCH RFC v1] net: dsa: microchip: add KSZ9477 I2C driver
On Thu, Jan 17, 2019 at 4:24 AM <Tristram.Ha@...rochip.com> wrote:
>
> From: Tristram Ha <Tristram.Ha@...rochip.com>
>
> Add KSZ9477 I2C driver support. The code ksz9477.c and ksz_common.c are
> used together to generate the I2C driver.
>
> Signed-off-by: Tristram Ha <Tristram.Ha@...rochip.com>
> ---
> drivers/net/dsa/microchip/Kconfig | 7 ++
> drivers/net/dsa/microchip/Makefile | 1 +
> drivers/net/dsa/microchip/ksz9477_i2c.c | 120 ++++++++++++++++++++++++++++++++
> 3 files changed, 128 insertions(+)
> create mode 100644 drivers/net/dsa/microchip/ksz9477_i2c.c
>
> diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
> index 385b93f..1798755 100644
> --- a/drivers/net/dsa/microchip/Kconfig
> +++ b/drivers/net/dsa/microchip/Kconfig
> @@ -9,6 +9,13 @@ menuconfig NET_DSA_MICROCHIP_KSZ9477
> help
> This driver adds support for Microchip KSZ9477 switch chips.
>
> +config NET_DSA_MICROCHIP_KSZ9477_I2C
> + tristate "KSZ9477 series I2C connected switch driver"
> + depends on NET_DSA_MICROCHIP_KSZ9477 && I2C
> + select REGMAP_I2C
> + help
> + Select to enable support for registering switches configured through I2C.
> +
> config NET_DSA_MICROCHIP_KSZ9477_SPI
> tristate "KSZ9477 series SPI connected switch driver"
> depends on NET_DSA_MICROCHIP_KSZ9477 && SPI
> diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
> index 3142c18..dbcc5db 100644
> --- a/drivers/net/dsa/microchip/Makefile
> +++ b/drivers/net/dsa/microchip/Makefile
> @@ -1,3 +1,4 @@
> obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_common.o
> obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477) += ksz9477.o
> +obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C) += ksz9477_i2c.o
> obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI) += ksz9477_spi.o
> diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c
> new file mode 100644
> index 0000000..d8720ff
> --- /dev/null
> +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Microchip KSZ9477 series register access through I2C
> + *
> + * Copyright (C) 2018-2019 Microchip Technology Inc.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +
> +#include "ksz_priv.h"
> +
> +#define REG_SIZE 0x8000
> +
> +#define I2C_REGMAP_VAL 8
> +#define I2C_REGMAP_REG 16
> +
> +#define KSZ_REGMAP_COMMON(n, width) \
> +{ \
> + .name = n, \
> + .max_register = REG_SIZE - (width), \
> + .reg_bits = I2C_REGMAP_REG, \
> + .val_bits = I2C_REGMAP_VAL * (width), \
> + .reg_stride = (width), \
> + .reg_format_endian = REGMAP_ENDIAN_BIG, \
> + .val_format_endian = REGMAP_ENDIAN_BIG, \
> +}
> +
> +static const struct regmap_config ksz9477_regmap_cfg[] = {
> + KSZ_REGMAP_COMMON("8", 1),
> + KSZ_REGMAP_COMMON("16", 2),
> + KSZ_REGMAP_COMMON("32", 4),
> +};
> +
> +static int ksz9477_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *i2c_id)
> +{
> + struct ksz_device *dev;
> + int i;
> + int ret;
> +
> + dev = ksz_switch_alloc(&i2c->dev);
> + if (!dev)
> + return -ENOMEM;
> +
> + for (i = 0; i < ARRAY_SIZE(ksz9477_regmap_cfg); i++) {
> + dev->regmap[i] = devm_regmap_init_i2c(i2c,
> + &ksz9477_regmap_cfg[i]);
> + if (IS_ERR(dev->regmap[i])) {
> + ret = PTR_ERR(dev->regmap[i]);
> + dev_err(&i2c->dev, "Failed to initialize regmap: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + if (i2c->dev.platform_data)
> + dev->pdata = i2c->dev.platform_data;
> +
> + ret = ksz9477_switch_register(dev);
> +
> + /* Main DSA driver may not be started yet. */
> + if (ret)
> + return ret;
> +
> + i2c_set_clientdata(i2c, dev);
> +
> + return 0;
> +}
> +
> +static int ksz9477_i2c_remove(struct i2c_client *i2c)
> +{
> + struct ksz_device *dev = i2c_get_clientdata(i2c);
> +
> + if (dev)
> + ksz_switch_remove(dev);
> +
> + return 0;
> +}
> +
> +static void ksz9477_i2c_shutdown(struct i2c_client *i2c)
> +{
> + struct ksz_device *dev = i2c_get_clientdata(i2c);
> +
> + if (dev && dev->dev_ops->shutdown)
> + dev->dev_ops->shutdown(dev);
> +}
> +
> +static const struct i2c_device_id ksz9477_i2c_id[] = {
> + { "ksz9477-switch", 0 },
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, ksz9477_i2c_id);
> +
> +static const struct of_device_id ksz9477_dt_ids[] = {
> + { .compatible = "microchip,ksz9477" },
> + { .compatible = "microchip,ksz9897" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
> +
> +static struct i2c_driver ksz9477_i2c_driver = {
> + .driver = {
> + .name = "ksz9477-switch",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(ksz9477_dt_ids),
> + },
> + .probe = ksz9477_i2c_probe,
> + .remove = ksz9477_i2c_remove,
> + .shutdown = ksz9477_i2c_shutdown,
> + .id_table = ksz9477_i2c_id,
> +};
> +
> +module_i2c_driver(ksz9477_i2c_driver);
> +
> +MODULE_AUTHOR("Tristram Ha <Tristram.Ha@...rochip.com>");
> +MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch I2C Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
I have to make use of the microchip regs_bin utility and one extra
patch to provide access to switch registers through
/sys/bus/i2c/devices/0-005f/registers file because I need to configure
master direct mode with sgmii which is not supported yet by this
driver but the i2c interface using regmap as it is here works for me.
So you can add my:
Tested-by: Sergio Paracuellos <sergio.paracuellos@...il.com>
Best regards,
Sergio Paracuellos
Powered by blists - more mailing lists