[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <82d9f82c-1da6-2374-062b-538840afcc44@ti.com>
Date: Fri, 18 Jan 2019 06:55:28 -0600
From: Dan Murphy <dmurphy@...com>
To: Wolfgang Grandegger <wg@...ndegger.com>, <mkl@...gutronix.de>,
<davem@...emloft.net>
CC: <linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 1/4] can: m_can: Create a m_can platform framework
Wolfgang
On 1/18/19 12:56 AM, Wolfgang Grandegger wrote:
> Hello Dan,
>
> Am 17.01.19 um 21:08 schrieb Dan Murphy:
>> Wolfgang
>>
>> On 1/17/19 2:05 PM, Dan Murphy wrote:
>>> Create a m_can platform framework that peripherial
>>> devices can register to and use common code and register sets.
>>> The peripherial devices may provide read/write and configuration
>>> support of the IP.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@...com>
>>> ---
>>> drivers/net/can/m_can/m_can.c | 6 +
>>> drivers/net/can/m_can/m_can_platform.c | 209 +++++++++++++++++++++++++
>>> drivers/net/can/m_can/m_can_platform.h | 163 +++++++++++++++++++
>>> 3 files changed, 378 insertions(+)
>>> create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>> create mode 100644 drivers/net/can/m_can/m_can_platform.h
>>>
>
> ... snip ...
>
>> This patch set is working for the TCAN and at least boots on io-mapped devices.
>> We have a couple of customers who are looking at using this implementation and we would like to
>> start moving this patch set along in the review.
>>
>> I did not put a change log in here as there have been no comments for the last 3 patch sets I sent.
>>
>> This v4 squashes a few bugs I found during testing across all the files.
>
> OK, after a very busy week I will try to find time for the review...
> finally.
>
Thanks. I anticipate a v5 as we debug the io mapped code and continue to test the TCAN code.
Dan
> Thanks,
>
> Wolfgang.
>
--
------------------
Dan Murphy
Powered by blists - more mailing lists