lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 18 Jan 2019 22:30:16 +0100
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Krzysztof Kozlowski <krzk@...nel.org>,
        Andrew Lunn <andrew@...n.ch>,
        "David S. Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Stefan Agner <stefan@...er.ch>
Subject: Re: [BUG bisect] Missing Micrel driver on VF50 (net: phy: check
 return code when requesting PHY driver module)

On 18.01.2019 21:58, Heiner Kallweit wrote:
> On 18.01.2019 09:48, Krzysztof Kozlowski wrote:
>> On Fri, 18 Jan 2019 at 09:39, Krzysztof Kozlowski <krzk@...nel.org> wrote:
>>>
>>> Hi,
>>>
>>> On today's next (next-20190118) my Colibri VF50 board fails to boot up
>>> from network (DHCP, NFSv4 root). Looks like missing network adapter.
>>> Expected:
>>> [ 3.041773] Micrel KSZ8041 400d1000.ethernet-1:00: attached PHY driver
>>> [Micrel KSZ8041] (mii_bus:phy_addr=400d1000.ethernet-1:00, irq=POLL)
>>>
>>> Result:
>>> [ 15.614964] Root-NFS: no NFS server address
>>> [ 15.619353] VFS: Unable to mount root fs via NFS, trying floppy.
>>> [ 15.626762] VFS: Cannot open root device "nfs" or unknown-block(2,0): error -6
>>> [ 15.634252] Please append a correct "root=" boot option; here are the
>>> available partitions:
>>> [ 15.642791] 0100 16384 ram0
>>> [ 15.642804] (driver?)
>>> [ 15.649076] Kernel panic - not syncing: VFS: Unable to mount root fs
>>> on unknown-block(2,0)
>>> [ 15.657423] ---[ end Kernel panic - not syncing: VFS: Unable to mount
>>> root fs on unknown-block(2,0) ]---
>>>
>>> Bisect pointed to:
>>>     net: phy: check return code when requesting PHY driver module
>>
>> I see now in the logs:
>> [ 2.436822] mdio_bus 400d1000.ethernet-1:00: error -2 loading PHY
>> driver module for ID 0x00221513
>> which is kind of misleading. There is no initramfs so there is no
>> usermod library at this point. It is not needed. This seems to break
>> all DHCP/NFS root boots without initrd/initramfs.
>>
> Thanks for the report. Could you please provide your kernel config
> and the syslog of a boot before or w/o the patch in question?
> 
> If you boot via nfs then I'd expect that the PHY driver is built-in and
> not a module. Therefore it's not fully clear to me yet why
> request_module() returns -ENOENT.
> 
OK, I see. The -ENOENT could refer to the modprobe binary, not the PHY
driver module. Still it would be helpful to see the kernel config and
the requested log.

>> Best regards,
>> Krzysztof
>>
> Heiner
> 

Powered by blists - more mailing lists