netdev - [PATCH lora-next 02/11] net: lora: sx130x: add loading of tx lut from DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190128161306.27805-3-ben.whitten@lairdtech.com>
Date:   Mon, 28 Jan 2019 16:12:56 +0000
From:   Ben Whitten <ben.whitten@...il.com>
To:     afaerber@...e.de
Cc:     linux-lpwan@...ts.infradead.org,
        Ben Whitten <ben.whitten@...il.com>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH lora-next 02/11] net: lora: sx130x: add loading of tx lut from DT

From: Ben Whitten <ben.whitten@...il.com>

The AGC software requires loading of a power lookup table on initialisation
prior to transmission.
The fields required are digital, pa, dac, and mixer gain. These values are
typically hardware specific and calibrated for a particular power output at
the card rf port.
The format of the DT binding is <power(s8) dig(u8) pa(u8) dac(u8) mix(u8)>
a valid entry is 5 bytes, a valid table is up to 16 entries.

Signed-off-by: Ben Whitten <ben.whitten@...il.com>
---
 drivers/net/lora/sx130x.c | 29 +++++++++++++++++++++++++++++
 drivers/net/lora/sx130x.h |  2 ++
 2 files changed, 31 insertions(+)

diff --git a/drivers/net/lora/sx130x.c b/drivers/net/lora/sx130x.c
index 3174fc695d54..70cfb4532b51 100644
--- a/drivers/net/lora/sx130x.c
+++ b/drivers/net/lora/sx130x.c
@@ -51,6 +51,14 @@ static const struct reg_field sx130x_regmap_fields[] = {
 		REG_FIELD(SX1301_EMERGENCY_FORCE_HOST_CTRL, 0, 0),
 };
 
+struct sx130x_tx_gain_lut {
+	s8 power;	/* dBm measured at board connector */
+	u8 dig_gain;
+	u8 pa_gain;
+	u8 dac_gain;
+	u8 mix_gain;
+};
+
 struct sx130x_priv {
 	struct lora_dev_priv	lora;
 	struct device		*dev;
@@ -59,6 +67,8 @@ struct sx130x_priv {
 	struct regmap_field	*regmap_fields[ARRAY_SIZE(sx130x_regmap_fields)];
 	struct mutex		io_lock;
 	void			*drvdata;
+	struct sx130x_tx_gain_lut tx_gain_lut[SX1301_TX_GAIN_LUT_MAX];
+	u8 tx_gain_lut_size;
 };
 
 struct regmap *sx130x_get_regmap(struct device *dev)
@@ -589,6 +599,7 @@ int sx130x_early_probe(struct regmap *regmap, struct gpio_desc *rst)
 	struct device *dev = regmap_get_device(regmap);
 	struct net_device *netdev;
 	struct sx130x_priv *priv;
+	const u8 *power_lut;
 	int ret;
 	int i;
 
@@ -620,6 +631,24 @@ int sx130x_early_probe(struct regmap *regmap, struct gpio_desc *rst)
 			return ret;
 		}
 	}
+
+	if (IS_ENABLED(CONFIG_OF)) {
+		power_lut = of_get_property(dev->of_node, "power-lut", &ret);
+		if (power_lut && (ret % 5)) {
+			dev_err(dev, "Invalid power table\n");
+			return -EINVAL;
+		} else if (power_lut) {
+			priv->tx_gain_lut_size = ret / 5;
+			for (i = 0; i < priv->tx_gain_lut_size; i++) {
+				priv->tx_gain_lut[i].power = *(power_lut++);
+				priv->tx_gain_lut[i].dig_gain = *(power_lut++);
+				priv->tx_gain_lut[i].pa_gain = *(power_lut++) & 0x03;
+				priv->tx_gain_lut[i].dac_gain = *(power_lut++) & 0x03;
+				priv->tx_gain_lut[i].mix_gain = *(power_lut++) & 0x0F;
+			}
+		}
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sx130x_early_probe);
diff --git a/drivers/net/lora/sx130x.h b/drivers/net/lora/sx130x.h
index abab2ee42512..6330777f4eac 100644
--- a/drivers/net/lora/sx130x.h
+++ b/drivers/net/lora/sx130x.h
@@ -18,6 +18,8 @@
 #define SX1301_MCU_AGC_FW_VERSION 4
 #define SX1301_MCU_AGC_CAL_FW_VERSION 2
 
+#define SX1301_TX_GAIN_LUT_MAX 16
+
 /* Page independent */
 #define SX1301_PAGE     0x00
 #define SX1301_VER      0x01
-- 
2.17.1