| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 30 Jan 2019 15:51:36 -0800
From: Peter Oskolkov <posk@...gle.com>
To: Alexei Starovoitov <ast@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>, netdev@...r.kernel.org
Cc: Peter Oskolkov <posk.devel@...il.com>,
David Ahern <dsahern@...il.com>,
Peter Oskolkov <posk@...gle.com>
Subject: [PATCH bpf-next v5 5/5] selftests: bpf: add test_lwt_ip_encap selftest
This patch adds a bpf self-test to cover BPF_LWT_ENCAP_IP mode
in bpf_lwt_push_encap.
Covered:
- encapping in LWT_IN and LWT_XMIT
- IPv4 and IPv6
Signed-off-by: Peter Oskolkov <posk@...gle.com>
Change-Id: I9d0d1003a40c28a41467116f3c32a84730ff39b2
---
tools/testing/selftests/bpf/Makefile | 5 +-
.../testing/selftests/bpf/test_lwt_ip_encap.c | 85 +++++
.../selftests/bpf/test_lwt_ip_encap.sh | 311 ++++++++++++++++++
3 files changed, 399 insertions(+), 2 deletions(-)
create mode 100644 tools/testing/selftests/bpf/test_lwt_ip_encap.c
create mode 100755 tools/testing/selftests/bpf/test_lwt_ip_encap.sh
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 8993e9c8f410..28aa3b3e297e 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -35,7 +35,7 @@ BPF_OBJ_FILES = \
sendmsg4_prog.o sendmsg6_prog.o test_lirc_mode2_kern.o \
get_cgroup_id_kern.o socket_cookie_prog.o test_select_reuseport_kern.o \
test_skb_cgroup_id_kern.o bpf_flow.o netcnt_prog.o test_xdp_vlan.o \
- xdp_dummy.o test_map_in_map.o
+ xdp_dummy.o test_map_in_map.o test_lwt_ip_encap.o
# Objects are built with default compilation flags and with sub-register
# code-gen enabled.
@@ -73,7 +73,8 @@ TEST_PROGS := test_kmod.sh \
test_lirc_mode2.sh \
test_skb_cgroup_id.sh \
test_flow_dissector.sh \
- test_xdp_vlan.sh
+ test_xdp_vlan.sh \
+ test_lwt_ip_encap.sh
TEST_PROGS_EXTENDED := with_addr.sh \
with_tunnels.sh \
diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.c b/tools/testing/selftests/bpf/test_lwt_ip_encap.c
new file mode 100644
index 000000000000..c957d6dfe6d7
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <stddef.h>
+#include <string.h>
+#include <linux/bpf.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include "bpf_helpers.h"
+#include "bpf_endian.h"
+
+struct grehdr {
+ __be16 flags;
+ __be16 protocol;
+};
+
+SEC("encap_gre")
+int bpf_lwt_encap_gre(struct __sk_buff *skb)
+{
+ struct encap_hdr {
+ struct iphdr iph;
+ struct grehdr greh;
+ } hdr;
+ int err;
+
+ memset(&hdr, 0, sizeof(struct encap_hdr));
+
+ hdr.iph.ihl = 5;
+ hdr.iph.version = 4;
+ hdr.iph.ttl = 0x40;
+ hdr.iph.protocol = 47; /* IPPROTO_GRE */
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+ hdr.iph.saddr = 0x640110ac; /* 172.16.1.100 */
+ hdr.iph.daddr = 0x641010ac; /* 172.16.16.100 */
+#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ hdr.iph.saddr = 0xac100164; /* 172.16.1.100 */
+ hdr.iph.daddr = 0xac101064; /* 172.16.16.100 */
+#else
+#error "Fix your compiler's __BYTE_ORDER__?!"
+#endif
+ hdr.iph.tot_len = bpf_htons(skb->len + sizeof(struct encap_hdr));
+
+ hdr.greh.protocol = skb->protocol;
+
+ err = bpf_lwt_push_encap(skb, BPF_LWT_ENCAP_IP, &hdr,
+ sizeof(struct encap_hdr));
+ if (err)
+ return BPF_DROP;
+
+ return BPF_LWT_REROUTE;
+}
+
+SEC("encap_gre6")
+int bpf_lwt_encap_gre6(struct __sk_buff *skb)
+{
+ struct encap_hdr {
+ struct ipv6hdr ip6hdr;
+ struct grehdr greh;
+ } hdr;
+ int err;
+
+ memset(&hdr, 0, sizeof(struct encap_hdr));
+
+ hdr.ip6hdr.version = 6;
+ hdr.ip6hdr.payload_len = bpf_htons(skb->len + sizeof(struct grehdr));
+ hdr.ip6hdr.nexthdr = 47; /* IPPROTO_GRE */
+ hdr.ip6hdr.hop_limit = 0x40;
+ /* fb01::1 */
+ hdr.ip6hdr.saddr.s6_addr[0] = 0xfb;
+ hdr.ip6hdr.saddr.s6_addr[1] = 1;
+ hdr.ip6hdr.saddr.s6_addr[15] = 1;
+ /* fb10::1 */
+ hdr.ip6hdr.daddr.s6_addr[0] = 0xfb;
+ hdr.ip6hdr.daddr.s6_addr[1] = 0x10;
+ hdr.ip6hdr.daddr.s6_addr[15] = 1;
+
+ hdr.greh.protocol = skb->protocol;
+
+ err = bpf_lwt_push_encap(skb, BPF_LWT_ENCAP_IP, &hdr,
+ sizeof(struct encap_hdr));
+ if (err)
+ return BPF_DROP;
+
+ return BPF_LWT_REROUTE;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
new file mode 100755
index 000000000000..4ca714e23ab0
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
@@ -0,0 +1,311 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Setup/topology:
+#
+# NS1 NS2 NS3
+# veth1 <---> veth2 veth3 <---> veth4 (the top route)
+# veth5 <---> veth6 veth7 <---> veth8 (the bottom route)
+#
+# each vethN gets IPv[4|6]_N address
+#
+# IPv*_SRC = IPv*_1
+# IPv*_DST = IPv*_4
+#
+# all tests test pings from IPv*_SRC to IPv*_DST
+#
+# by default, routes are configured to allow packets to go
+# IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route)
+#
+# a GRE device is installed in NS3 with IPv*_GRE, and
+# NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8
+# (the bottom route)
+#
+# Tests:
+#
+# 1. routes NS2->IPv*_DST are brought down, so the only way a ping
+# from IP*_SRC to IP*_DST can work is via IPv*_GRE
+#
+# 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1
+# that encaps the packets with an IP/GRE header to route to IPv*_GRE
+#
+# ping: SRC->[encap at veth1:egress]->GRE:decap->DST
+# ping replies go DST->SRC directly
+#
+# 2b. in an ingress test, a bpf LWT_IN program is installed on veth2
+# that encaps the packets with an IP/GRE header to route to IPv*_GRE
+#
+# ping: SRC->[encap at veth2:ingress]->GRE:decap->DST
+# ping replies go DST->SRC directly
+
+set -e # exit on error
+
+if [[ $EUID -ne 0 ]]; then
+ echo "This script must be run as root"
+ echo "FAIL"
+ exit 1
+fi
+
+readonly NS1="ns1-$(mktemp -u XXXXXX)"
+readonly NS2="ns2-$(mktemp -u XXXXXX)"
+readonly NS3="ns3-$(mktemp -u XXXXXX)"
+
+readonly IPv4_1="172.16.1.100"
+readonly IPv4_2="172.16.2.100"
+readonly IPv4_3="172.16.3.100"
+readonly IPv4_4="172.16.4.100"
+readonly IPv4_5="172.16.5.100"
+readonly IPv4_6="172.16.6.100"
+readonly IPv4_7="172.16.7.100"
+readonly IPv4_8="172.16.8.100"
+readonly IPv4_GRE="172.16.16.100"
+
+readonly IPv4_SRC=$IPv4_1
+readonly IPv4_DST=$IPv4_4
+
+readonly IPv6_1="fb01::1"
+readonly IPv6_2="fb02::1"
+readonly IPv6_3="fb03::1"
+readonly IPv6_4="fb04::1"
+readonly IPv6_5="fb05::1"
+readonly IPv6_6="fb06::1"
+readonly IPv6_7="fb07::1"
+readonly IPv6_8="fb08::1"
+readonly IPv6_GRE="fb10::1"
+
+readonly IPv6_SRC=$IPv6_1
+readonly IPv6_DST=$IPv6_4
+
+setup() {
+set -e # exit on error
+ # create devices and namespaces
+ ip netns add "${NS1}"
+ ip netns add "${NS2}"
+ ip netns add "${NS3}"
+
+ ip link add veth1 type veth peer name veth2
+ ip link add veth3 type veth peer name veth4
+ ip link add veth5 type veth peer name veth6
+ ip link add veth7 type veth peer name veth8
+
+ ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1
+ ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1
+
+ ip link set veth1 netns ${NS1}
+ ip link set veth2 netns ${NS2}
+ ip link set veth3 netns ${NS2}
+ ip link set veth4 netns ${NS3}
+ ip link set veth5 netns ${NS1}
+ ip link set veth6 netns ${NS2}
+ ip link set veth7 netns ${NS2}
+ ip link set veth8 netns ${NS3}
+
+ # configure addesses: the top route (1-2-3-4)
+ ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1
+ ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2
+ ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3
+ ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4
+ ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1
+ ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2
+ ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3
+ ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4
+
+ # configure addresses: the bottom route (5-6-7-8)
+ ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5
+ ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6
+ ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7
+ ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8
+ ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5
+ ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6
+ ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7
+ ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8
+
+
+ ip -netns ${NS1} link set dev veth1 up
+ ip -netns ${NS2} link set dev veth2 up
+ ip -netns ${NS2} link set dev veth3 up
+ ip -netns ${NS3} link set dev veth4 up
+ ip -netns ${NS1} link set dev veth5 up
+ ip -netns ${NS2} link set dev veth6 up
+ ip -netns ${NS2} link set dev veth7 up
+ ip -netns ${NS3} link set dev veth8 up
+
+ # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default;
+ # the bottom route to specific bottom addresses
+
+ # NS1
+ # top route
+ ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1
+ ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} # go top by default
+ ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1
+ ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} # go top by default
+ # bottom route
+ ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5
+ ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6}
+ ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6}
+ ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5
+ ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6}
+ ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6}
+
+ # NS2
+ # top route
+ ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2
+ ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3
+ ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2
+ ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3
+ # bottom route
+ ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6
+ ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7
+ ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6
+ ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7
+
+ # NS3
+ # top route
+ ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4
+ ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3}
+ ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3}
+ ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4
+ ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3}
+ ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3}
+ # bottom route
+ ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8
+ ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7}
+ ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7}
+ ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8
+ ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7}
+ ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7}
+
+ # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route
+ ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255
+ ip -netns ${NS3} link set gre_dev up
+ ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev
+ ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6}
+ ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8}
+
+
+ # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route
+ ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255
+ ip -netns ${NS3} link set gre6_dev up
+ ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev
+ ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6}
+ ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8}
+
+ # rp_filter gets confused by what these tests are doing, so disable it
+ ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0
+ ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0
+ ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0
+}
+
+cleanup() {
+ ip netns del ${NS1} 2> /dev/null
+ ip netns del ${NS2} 2> /dev/null
+ ip netns del ${NS3} 2> /dev/null
+}
+
+trap cleanup EXIT
+
+test_ping() {
+ local readonly PROTO=$1
+ local readonly EXPECTED=$2
+ local RET=0
+
+ set +e
+ if [ "${PROTO}" == "IPv4" ] ; then
+ ip netns exec ${NS1} ping -c 1 -W 1 -I ${IPv4_SRC} ${IPv4_DST} 2>&1 > /dev/null
+ RET=$?
+ elif [ "${PROTO}" == "IPv6" ] ; then
+ ip netns exec ${NS1} ping6 -c 1 -W 6 -I ${IPv6_SRC} ${IPv6_DST} 2>&1 > /dev/null
+ RET=$?
+ else
+ echo "test_ping: unknown PROTO: ${PROTO}"
+ exit 1
+ fi
+ set -e
+
+ if [ "0" != "${RET}" ]; then
+ RET=1
+ fi
+
+ if [ "${EXPECTED}" != "${RET}" ] ; then
+ echo "FAIL: test_ping: ${RET}"
+ exit 1
+ fi
+}
+
+test_egress() {
+ local readonly ENCAP=$1
+ echo "starting egress ${ENCAP} encap test"
+ setup
+
+ # need to wait a bit for IPv6 to autoconf, otherwise
+ # ping6 sometimes fails with "unable to bind to address"
+
+ # by default, pings work
+ test_ping IPv4 0
+ test_ping IPv6 0
+
+ # remove NS2->DST routes, ping fails
+ ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3
+ ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3
+ test_ping IPv4 1
+ test_ping IPv6 1
+
+ # install replacement routes (LWT/eBPF), pings succeed
+ if [ "${ENCAP}" == "IPv4" ] ; then
+ ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre dev veth1
+ ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre dev veth1
+ elif [ "${ENCAP}" == "IPv6" ] ; then
+ ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre6 dev veth1
+ ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre6 dev veth1
+ else
+ echo "FAIL: unknown encap ${ENCAP}"
+ fi
+ test_ping IPv4 0
+ test_ping IPv6 0
+
+ cleanup
+ echo "PASS"
+}
+
+test_ingress() {
+ local readonly ENCAP=$1
+ echo "starting ingress ${ENCAP} encap test"
+ setup
+
+ # need to wait a bit for IPv6 to autoconf, otherwise
+ # ping6 sometimes fails with "unable to bind to address"
+
+ # by default, pings work
+ test_ping IPv4 0
+ test_ping IPv6 0
+
+ # remove NS2->DST routes, pings fail
+ ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3
+ ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3
+ test_ping IPv4 1
+ test_ping IPv6 1
+
+ # install replacement routes (LWT/eBPF), pings succeed
+ if [ "${ENCAP}" == "IPv4" ] ; then
+ ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre dev veth2
+ ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre dev veth2
+ elif [ "${ENCAP}" == "IPv6" ] ; then
+ ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre6 dev veth2
+ ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre6 dev veth2
+ else
+ echo "FAIL: unknown encap ${ENCAP}"
+ fi
+ test_ping IPv4 0
+ test_ping IPv6 0
+
+ cleanup
+ echo "PASS"
+}
+
+test_egress IPv4
+test_egress IPv6
+
+test_ingress IPv4
+test_ingress IPv6
+
+echo "all tests passed"
--
2.20.1.495.gaa96b0ce6b-goog
Powered by blists - more mailing lists