Message-ID: <20190131023240.GF25745@linux-kyyb.suse>
Date:   Thu, 31 Jan 2019 10:32:40 +0800
From:   David Chang <dchang@...e.com>
To:     Heiner Kallweit <hkallweit1@...il.com>
Cc:     Peter Ceiley <peter@...ley.net>,
        Realtek linux nic maintainers <nic_swsd@...ltek.com>,
        netdev@...r.kernel.org
Subject: Re: r8169 Driver - Poor Network Performance Since Kernel 4.19

Hi,

We had a similr case here.
- Realtek r8169 receive performance regression in kernel 4.19
  https://bugzilla.suse.com/show_bug.cgi?id=1119649

kernel: r8169 0000:01:00.0 eth0: RTL8168h/8111h, XID 54100880
The major symptom is there are many rx_missed count.


On Jan 30, 2019 at 20:15:45 +0100, Heiner Kallweit wrote:
> Hi Peter,
> 
> recently I had somebody where pcie_aspm=off for whatever reason didn't
> do the trick, can you also check with pcie_aspm.policy=performance.

We will give it a try later.

> And please check with "ethtool -S <if>" whether the chip statistics
> show a significant number of errors.
> 
> If this doesn't help you may have to bisect to find the offending commit.

We had tried fallback driver to a few previous commits as following,
but with no luck.

9675931e6b65 r8169: re-enable MSI-X on RTL8168g (v4.19)
098b01ad9837 r8169: don't include asm headers directly (v4.19-rc1)
a2965f12fde6 r8169: remove rtl8169_set_speed_xmii (v4.19-rc1)
6fcf9b1d4d6c r8169: fix runtime suspend (v4.19-rc1)
e397286b8e89 r8169: remove TBI 1000BaseX support (v4.19-rc1)

Thanks,
David Chang

> 
> Heiner
> 
> 
> On 30.01.2019 10:59, Peter Ceiley wrote:
> > Hi Heiner,
> > 
> > I tried disabling the ASPM using the pcie_aspm=off kernel parameter
> > and this made no difference.
> > 
> > I tried compiling the 4.18.16 r8169.c with the 4.19.18 source and
> > subsequently loaded the module in the running 4.19.18 kernel. I can
> > confirm that this immediately resolved the issue and access to the NFS
> > shares operated as expected.
> > 
> > I presume this means it is an issue with the r8169 driver included in
> > 4.19 onwards?
> > 
> > To answer your last questions:
> > 
> > Base Board Information
> >     Manufacturer: Alienware
> >     Product Name: 0PGRP5
> >     Version: A02
> > 
> > ... and yes, the RTL8168 is the onboard network chip.
> > 
> > Regards,
> > 
> > Peter.
> > 
> > On Tue, 29 Jan 2019 at 17:44, Heiner Kallweit <hkallweit1@...il.com> wrote:
> >>
> >> Hi Peter,
> >>
> >> I think the vendor driver doesn't enable ASPM per default.
> >> So it's worth a try to disable ASPM in the BIOS or via sysfs.
> >> Few older systems seem to have issues with ASPM, what kind of
> >> system / mainboard are you using? The RTL8168 is the onboard
> >> network chip?
> >>
> >> Rgds, Heiner
> >>
> >>
> >> On 29.01.2019 07:20, Peter Ceiley wrote:
> >>> Hi Heiner,
> >>>
> >>> Thanks, I'll do some more testing. It might not be the driver - I
> >>> assumed it was due to the fact that using the r8168 driver 'resolves'
> >>> the issue. I'll see if I can test the r8169.c on top of 4.19 - this is
> >>> a good idea.
> >>>
> >>> Cheers,
> >>>
> >>> Peter.
> >>>
> >>> On Tue, 29 Jan 2019 at 17:16, Heiner Kallweit <hkallweit1@...il.com> wrote:
> >>>>
> >>>> Hi Peter,
> >>>>
> >>>> at a first glance it doesn't look like a typical driver issue.
> >>>> What you could do:
> >>>>
> >>>> - Test the r8169.c from 4.18 on top of 4.19.
> >>>>
> >>>> - Check whether disabling ASPM (/sys/module/pcie_aspm) has an effect.
> >>>>
> >>>> - Bisect between 4.18 and 4.19 to find the offending commit.
> >>>>
> >>>> Any specific reason why you think root cause is in the driver and not
> >>>> elsewhere in the network subsystem?
> >>>>
> >>>> Heiner
> >>>>
> >>>>
> >>>> On 28.01.2019 23:10, Peter Ceiley wrote:
> >>>>> Hi Heiner,
> >>>>>
> >>>>> Thanks for getting back to me.
> >>>>>
> >>>>> No, I don't use jumbo packets.
> >>>>>
> >>>>> Bandwidth is *generally* good, and iperf results to my NAS provide
> >>>>> over 900 Mbits/s in both circumstances. The issue seems to appear when
> >>>>> establishing a connection and is most notable, for example, on my
> >>>>> mounted NFS shares where it takes seconds (up to 10's of seconds on
> >>>>> larger directories) to list the contents of each directory. Once a
> >>>>> transfer begins on a file, I appear to get good bandwidth.
> >>>>>
> >>>>> I'm unsure of the best scientific data to provide you in order to
> >>>>> troubleshoot this issue. Running the following
> >>>>>
> >>>>>     netstat -s |grep retransmitted
> >>>>>
> >>>>> shows a steady increase in retransmitted segments each time I list the
> >>>>> contents of a remote directory, for example, running 'ls' on a
> >>>>> directory containing 345 media files did the following using kernel
> >>>>> 4.19.18:
> >>>>>
> >>>>> increased retransmitted segments by 21 and the 'time' command showed
> >>>>> the following:
> >>>>>     real    0m19.867s
> >>>>>     user    0m0.012s
> >>>>>     sys    0m0.036s
> >>>>>
> >>>>> The same command shows no retransmitted segments running kernel
> >>>>> 4.18.16 and 'time' showed:
> >>>>>     real    0m0.300s
> >>>>>     user    0m0.004s
> >>>>>     sys    0m0.007s
> >>>>>
> >>>>> ifconfig does not show any RX/TX errors nor dropped packets in either case.
> >>>>>
> >>>>> dmesg XID:
> >>>>> [    2.979984] r8169 0000:03:00.0 eth0: RTL8168g/8111g,
> >>>>> f8:b1:56:fe:67:e0, XID 4c000800, IRQ 32
> >>>>>
> >>>>> # lspci -vv
> >>>>> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> >>>>> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
> >>>>>     Subsystem: Dell RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
> >>>>>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >>>>> ParErr- Stepping- SERR- FastB2B- DisINTx+
> >>>>>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> >>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>>>>     Latency: 0, Cache Line Size: 64 bytes
> >>>>>     Interrupt: pin A routed to IRQ 19
> >>>>>     Region 0: I/O ports at d000 [size=256]
> >>>>>     Region 2: Memory at f7b00000 (64-bit, non-prefetchable) [size=4K]
> >>>>>     Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K]
> >>>>>     Capabilities: [40] Power Management version 3
> >>>>>         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >>>>>         Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> >>>>>     Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> >>>>>         Address: 0000000000000000  Data: 0000
> >>>>>     Capabilities: [70] Express (v2) Endpoint, MSI 01
> >>>>>         DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> >>>>> <512ns, L1 <64us
> >>>>>             ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> >>>>> SlotPowerLimit 10.000W
> >>>>>         DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
> >>>>>             RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> >>>>>             MaxPayload 128 bytes, MaxReadReq 4096 bytes
> >>>>>         DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
> >>>>>         LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
> >>>>> Latency L0s unlimited, L1 <64us
> >>>>>             ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
> >>>>>         LnkCtl:    ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
> >>>>>             ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> >>>>>         LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
> >>>>>             TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> >>>>>         DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+,
> >>>>> OBFF Via message/WAKE#
> >>>>>              AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> >>>>>         DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+,
> >>>>> OBFF Disabled
> >>>>>              AtomicOpsCtl: ReqEn-
> >>>>>         LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> >>>>>              Transmit Margin: Normal Operating Range,
> >>>>> EnterModifiedCompliance- ComplianceSOS-
> >>>>>              Compliance De-emphasis: -6dB
> >>>>>         LnkSta2: Current De-emphasis Level: -6dB,
> >>>>> EqualizationComplete-, EqualizationPhase1-
> >>>>>              EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> >>>>>     Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
> >>>>>         Vector table: BAR=4 offset=00000000
> >>>>>         PBA: BAR=4 offset=00000800
> >>>>>     Capabilities: [d0] Vital Product Data
> >>>>> pcilib: sysfs_read_vpd: read failed: Input/output error
> >>>>>         Not readable
> >>>>>     Capabilities: [100 v1] Advanced Error Reporting
> >>>>>         UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> >>>>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>>>>         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> >>>>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>>>>         UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> >>>>> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>>>>         CESta:    RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout+ AdvNonFatalErr-
> >>>>>         CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
> >>>>>         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
> >>>>> ECRCChkCap+ ECRCChkEn-
> >>>>>             MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> >>>>>         HeaderLog: 00000000 00000000 00000000 00000000
> >>>>>     Capabilities: [140 v1] Virtual Channel
> >>>>>         Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
> >>>>>         Arb:    Fixed- WRR32- WRR64- WRR128-
> >>>>>         Ctrl:    ArbSelect=Fixed
> >>>>>         Status:    InProgress-
> >>>>>         VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> >>>>>             Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> >>>>>             Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> >>>>>             Status:    NegoPending- InProgress-
> >>>>>     Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
> >>>>>     Capabilities: [170 v1] Latency Tolerance Reporting
> >>>>>         Max snoop latency: 71680ns
> >>>>>         Max no snoop latency: 71680ns
> >>>>>     Kernel driver in use: r8169
> >>>>>     Kernel modules: r8169
> >>>>>
> >>>>> Please let me know if you have any other ideas in terms of testing.
> >>>>>
> >>>>> Thanks!
> >>>>>
> >>>>> Peter.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Tue, 29 Jan 2019 at 05:28, Heiner Kallweit <hkallweit1@...il.com> wrote:
> >>>>>>
> >>>>>> On 28.01.2019 12:13, Peter Ceiley wrote:
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> I have been experiencing very poor network performance since Kernel
> >>>>>>> 4.19 and I'm confident it's related to the r8169 driver.
> >>>>>>>
> >>>>>>> I have no issue with kernel versions 4.18 and prior. I am experiencing
> >>>>>>> this issue in kernels 4.19 and 4.20 (currently running/testing with
> >>>>>>> 4.20.4 & 4.19.18).
> >>>>>>>
> >>>>>>> If someone could guide me in the right direction, I'm happy to help
> >>>>>>> troubleshoot this issue. Note that I have been keeping an eye on one
> >>>>>>> issue related to loading of the PHY driver, however, my symptoms
> >>>>>>> differ in that I still have a network connection. I have attempted to
> >>>>>>> reload the driver on a running system, but this does not improve the
> >>>>>>> situation.
> >>>>>>>
> >>>>>>> Using the proprietary r8168 driver returns my device to proper working order.
> >>>>>>>
> >>>>>>> lshw shows:
> >>>>>>>        description: Ethernet interface
> >>>>>>>        product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
> >>>>>>>        vendor: Realtek Semiconductor Co., Ltd.
> >>>>>>>        physical id: 0
> >>>>>>>        bus info: pci@...0:03:00.0
> >>>>>>>        logical name: enp3s0
> >>>>>>>        version: 0c
> >>>>>>>        serial:
> >>>>>>>        size: 1Gbit/s
> >>>>>>>        capacity: 1Gbit/s
> >>>>>>>        width: 64 bits
> >>>>>>>        clock: 33MHz
> >>>>>>>        capabilities: pm msi pciexpress msix vpd bus_master cap_list
> >>>>>>> ethernet physical tp aui bnc mii fibre 10bt 10bt-fd 100bt 100bt-fd
> >>>>>>> 1000bt-fd autonegotiation
> >>>>>>>        configuration: autonegotiation=on broadcast=yes driver=r8169
> >>>>>>> duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.1.25
> >>>>>>> latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
> >>>>>>>        resources: irq:19 ioport:d000(size=256)
> >>>>>>> memory:f7b00000-f7b00fff memory:f2100000-f2103fff
> >>>>>>>
> >>>>>>> Kind Regards,
> >>>>>>>
> >>>>>>> Peter.
> >>>>>>>
> >>>>>> Hi Peter,
> >>>>>>
> >>>>>> the description "poor network performance" is quite vague, therefore:
> >>>>>>
> >>>>>> - Can you provide any measurements?
> >>>>>> - iperf results before and after
> >>>>>> - statistics about dropped packets (rx and/or tx)
> >>>>>> - Do you use jumbo packets?
> >>>>>>
> >>>>>> Also help would be a "lspci -vv" output for the network card and
> >>>>>> the dmesg output line with the chip XID.
> >>>>>>
> >>>>>> Heiner
> >>>>>
> >>>>
> >>>
> >>
> > 
> 

Powered by blists - more mailing lists