lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <309B89C4C689E141A5FF6A0C5FB2118B96621259@ORSMSX103.amr.corp.intel.com> Date: Fri, 1 Feb 2019 23:28:57 +0000 From: "Brown, Aaron F" <aaron.f.brown@...el.com> To: Konstantin Khlebnikov <khlebnikov@...dex-team.ru>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>, "intel-wired-lan@...ts.osuosl.org" <intel-wired-lan@...ts.osuosl.org>, "Kirsher, Jeffrey T" <jeffrey.t.kirsher@...el.com> CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, "David S. Miller" <davem@...emloft.net> Subject: RE: [PATCH] e1000e: fix cyclic resets at link up with active tx > -----Original Message----- > From: netdev-owner@...r.kernel.org [mailto:netdev- > owner@...r.kernel.org] On Behalf Of Konstantin Khlebnikov > Sent: Monday, January 14, 2019 5:30 AM > To: netdev@...r.kernel.org; intel-wired-lan@...ts.osuosl.org; Kirsher, > Jeffrey T <jeffrey.t.kirsher@...el.com> > Cc: linux-kernel@...r.kernel.org; David S. Miller <davem@...emloft.net> > Subject: [PATCH] e1000e: fix cyclic resets at link up with active tx > > I'm seeing series of e1000e resets (sometimes endless) at system boot > if something generates tx traffic at this time. In my case this is > netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states > have been disabled in order to enable jumbo frames" from e1000e itself. > As result e1000_watchdog_task sees used tx buffer while carrier is off > and start this reset cycle again. > > [ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: None > [ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > [ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000 > [ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: None > [ 27.174495] 8021q: 802.1Q VLAN Support v1.8 > [ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1 > [ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to > net_prio or net_cls activation > [ 30.898564] netpoll: netconsole: local port 6666 > [ 30.898566] netpoll: netconsole: local IPv6 address > 2a02:6b8:0:80b:beae:c5ff:fe28:23f8 > [ 30.898567] netpoll: netconsole: interface 'eth1' > [ 30.898568] netpoll: netconsole: remote port 6666 > [ 30.898568] netpoll: netconsole: remote IPv6 address > 2a02:6b8:b000:605c:e61d:2dff:fe03:3790 > [ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0 > [ 30.917747] console [netcon0] enabled > [ 30.917749] netconsole: network logging started > [ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in > order to enable jumbo frames > [ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: None > > This patch flushes tx buffers only once when carrier is off > rather than at each watchdog iteration. > > Signed-off-by: Konstantin Khlebnikov <khlebnikov@...dex-team.ru> > --- > drivers/net/ethernet/intel/e1000e/netdev.c | 15 ++++++--------- > 1 file changed, 6 insertions(+), 9 deletions(-) Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Powered by blists - more mailing lists