| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190204141641.18272-1-pankaj.bansal@nxp.com>
Date: Mon, 4 Feb 2019 08:51:57 +0000
From: Pankaj Bansal <pankaj.bansal@....com>
To: Shawn Guo <shawnguo@...nel.org>, Leo Li <leoyang.li@....com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Pankaj Bansal <pankaj.bansal@....com>
Subject: [PATCH v2] arm64: dts: lx2160aqds: Add mdio mux nodes
The two external MDIO buses used to communicate with phy devices that are
external to SOC are muxed in LX2160AQDS board.
These buses can be routed to any one of the eight IO slots on LX2160AQDS
board depending on value in fpga register 0x54.
Additionally the external MDIO1 is used to communicate to the onboard
RGMII phy devices.
The mdio1 is controlled by bits 4-7 of fpga register and mdio2 is
controlled by bits 0-3 of fpga register.
Signed-off-by: Pankaj Bansal <pankaj.bansal@....com>
---
Notes:
V2:
- removed unnecassary TODO statements
- removed device_type from mdio nodes
- change the case of hex number to lowercase
- removed board specific comments from soc file
.../boot/dts/freescale/fsl-lx2160a-qds.dts | 115 +++++++++++++++++
.../boot/dts/freescale/fsl-lx2160a.dtsi | 18 +++
2 files changed, 133 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 99a22abbe725..2c3020a72d41 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -46,6 +46,121 @@
&i2c0 {
status = "okay";
+ fpga@66 {
+ compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c";
+ reg = <0x66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-mux-1@54 {
+ mdio-parent-bus = <&emdio1>;
+ reg = <0x54>; /* BRDCFG4 */
+ mux-mask = <0xf8>; /* EMI1_MDIO */
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x00>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@40 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@c0 {
+ reg = <0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@c8 {
+ reg = <0xc8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@d0 {
+ reg = <0xd0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@d8 {
+ reg = <0xd8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@e0 {
+ reg = <0xe0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@e8 {
+ reg = <0xe8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@f0 {
+ reg = <0xf0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@f8 {
+ reg = <0xf8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ mdio-mux-2@54 {
+ mdio-parent-bus = <&emdio2>;
+ reg = <0x54>; /* BRDCFG4 */
+ mux-mask = <0x07>; /* EMI2_MDIO */
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x00>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@1 {
+ reg = <0x01>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@2 {
+ reg = <0x02>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@3 {
+ reg = <0x03>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@4 {
+ reg = <0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@5 {
+ reg = <0x05>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@6 {
+ reg = <0x06>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@7 {
+ reg = <0x07>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index a79f5c1ea56d..a74045ad22ad 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -762,5 +762,23 @@
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
};
+
+ /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+ emdio1: mdio@...6000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8b96000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ little-endian; /* force the driver in LE mode */
+ };
+
+ /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
+ emdio2: mdio@...7000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8b97000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ little-endian; /* force the driver in LE mode */
+ };
};
};
--
2.17.1
Powered by blists - more mailing lists