netdev - [PATCH 2/5] net: marvell: mvpp2: fix stuck in-band SGMII negotiation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1gs8Br-0006Oo-Jc@rmk-PC.armlinux.org.uk>
Date:   Fri, 08 Feb 2019 15:35:43 +0000
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Antoine Tenart <antoine.tenart@...tlin.com>,
        Maxime Chevallier <maxime.chevallier@...tlin.com>
Cc:     Baruch Siach <baruch@...s.co.il>,
        Sven Auhagen <sven.auhagen@...eatech.de>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: [PATCH 2/5] net: marvell: mvpp2: fix stuck in-band SGMII negotiation

It appears that the mvpp22 can get stuck with SGMII negotiation.  The
symptoms are that in-band negotiation never completes and the partner
(eg, PHY) never reports SGMII link up, or if it supports negotiation
bypass, goes into negotiation bypass mode (which will happen when the
PHY sees that the MAC is alive but gets no response.)

Triggering the PHY end of the link to re-negotiate results in the
bypass bit clearing on the PHY, and then re-setting - indicating that
the problem is at the mvpp22 GMAC end.

Asserting the GMAC reset and de-asserting it resolves the issue.
Arrange to assert the GMAC reset at probe time, and deassert it only
after we have configured the GMAC for the appropriate mode.  This
resolves the issue.

Tested-by: Sven Auhagen <sven.auhagen@...eatech.de>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index c590dc7ba70a..1cb5023b2575 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1392,13 +1392,9 @@ static void mvpp2_port_reset(struct mvpp2_port *port)
 	for (i = 0; i < ARRAY_SIZE(mvpp2_ethtool_regs); i++)
 		mvpp2_read_count(port, &mvpp2_ethtool_regs[i]);
 
-	val = readl(port->base + MVPP2_GMAC_CTRL_2_REG) &
-		    ~MVPP2_GMAC_PORT_RESET_MASK;
+	val = readl(port->base + MVPP2_GMAC_CTRL_2_REG) |
+	      MVPP2_GMAC_PORT_RESET_MASK;
 	writel(val, port->base + MVPP2_GMAC_CTRL_2_REG);
-
-	while (readl(port->base + MVPP2_GMAC_CTRL_2_REG) &
-	       MVPP2_GMAC_PORT_RESET_MASK)
-		continue;
 }
 
 /* Change maximum receive size of the port */
@@ -4554,12 +4550,15 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
 			      const struct phylink_link_state *state)
 {
 	u32 an, ctrl0, ctrl2, ctrl4;
+	u32 old_ctrl2;
 
 	an = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
 	ctrl0 = readl(port->base + MVPP2_GMAC_CTRL_0_REG);
 	ctrl2 = readl(port->base + MVPP2_GMAC_CTRL_2_REG);
 	ctrl4 = readl(port->base + MVPP22_GMAC_CTRL_4_REG);
 
+	old_ctrl2 = ctrl2;
+
 	/* Force link down */
 	an &= ~MVPP2_GMAC_FORCE_LINK_PASS;
 	an |= MVPP2_GMAC_FORCE_LINK_DOWN;
@@ -4656,6 +4655,12 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
 	writel(ctrl2, port->base + MVPP2_GMAC_CTRL_2_REG);
 	writel(ctrl4, port->base + MVPP22_GMAC_CTRL_4_REG);
 	writel(an, port->base + MVPP2_GMAC_AUTONEG_CONFIG);
+
+	if (old_ctrl2 & MVPP2_GMAC_PORT_RESET_MASK) {
+		while (readl(port->base + MVPP2_GMAC_CTRL_2_REG) &
+		       MVPP2_GMAC_PORT_RESET_MASK)
+			continue;
+	}
 }
 
 static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
-- 
2.7.4