netdev - [PATCH net-next 3/3] net: phy: use phy_modify_changed in genphy_config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <affccf1b-9c2f-2c5a-df8f-43f11ca8ccdc@gmail.com>
Date:   Sun, 10 Feb 2019 19:59:57 +0100
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        David Miller <davem@...emloft.net>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next 3/3] net: phy: use phy_modify_changed in
 genphy_config_advert

Use phy_modify_changed() to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
 drivers/net/phy/phy_device.c | 43 +++++++++++++-----------------------
 1 file changed, 15 insertions(+), 28 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8573d17ec..3d14e48ae 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1516,7 +1516,7 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable);
 static int genphy_config_advert(struct phy_device *phydev)
 {
 	u32 advertise;
-	int oldadv, adv, bmsr;
+	int bmsr, adv;
 	int err, changed = 0;
 
 	/* Only allow advertising what this PHY supports */
@@ -1529,22 +1529,14 @@ static int genphy_config_advert(struct phy_device *phydev)
 			    phydev->advertising);
 
 	/* Setup standard advertisement */
-	adv = phy_read(phydev, MII_ADVERTISE);
-	if (adv < 0)
-		return adv;
-
-	oldadv = adv;
-	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
-		 ADVERTISE_PAUSE_ASYM);
-	adv |= ethtool_adv_to_mii_adv_t(advertise);
-
-	if (adv != oldadv) {
-		err = phy_write(phydev, MII_ADVERTISE, adv);
-
-		if (err < 0)
-			return err;
+	err = phy_modify_changed(phydev, MII_ADVERTISE,
+				 ADVERTISE_ALL | ADVERTISE_100BASE4 |
+				 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
+				 ethtool_adv_to_mii_adv_t(advertise));
+	if (err < 0)
+		return err;
+	if (err > 0)
 		changed = 1;
-	}
 
 	bmsr = phy_read(phydev, MII_BMSR);
 	if (bmsr < 0)
@@ -1558,25 +1550,20 @@ static int genphy_config_advert(struct phy_device *phydev)
 		return changed;
 
 	/* Configure gigabit if it's supported */
-	adv = phy_read(phydev, MII_CTRL1000);
-	if (adv < 0)
-		return adv;
-
-	oldadv = adv;
-	adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
-
+	adv = 0;
 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
 			      phydev->supported) ||
 	    linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
 			      phydev->supported))
-		adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
+		adv = ethtool_adv_to_mii_ctrl1000_t(advertise);
 
-	if (adv != oldadv)
-		changed = 1;
-
-	err = phy_write(phydev, MII_CTRL1000, adv);
+	err = phy_modify_changed(phydev, MII_CTRL1000,
+				 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
+				 adv);
 	if (err < 0)
 		return err;
+	if (err > 0)
+		changed = 1;
 
 	return changed;
 }
-- 
2.20.1