| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Feb 2019 20:43:30 +0000
From: Leo Li <leoyang.li@....com>
To: Shawn Guo <shawnguo@...nel.org>,
Pankaj Bansal <pankaj.bansal@....com>
CC: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH v3] arm64: dts: lx2160aqds: Add mdio mux nodes
> -----Original Message-----
> From: Shawn Guo <shawnguo@...nel.org>
> Sent: Sunday, February 10, 2019 9:00 PM
> To: Pankaj Bansal <pankaj.bansal@....com>
> Cc: Leo Li <leoyang.li@....com>; Andrew Lunn <andrew@...n.ch>; Florian
> Fainelli <f.fainelli@...il.com>; netdev@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org
> Subject: Re: [PATCH v3] arm64: dts: lx2160aqds: Add mdio mux nodes
>
> On Wed, Feb 06, 2019 at 09:40:33AM +0000, Pankaj Bansal wrote:
> > The two external MDIO buses used to communicate with phy devices that
> > are external to SOC are muxed in LX2160AQDS board.
> >
> > These buses can be routed to any one of the eight IO slots on
> > LX2160AQDS board depending on value in fpga register 0x54.
> >
> > Additionally the external MDIO1 is used to communicate to the onboard
> > RGMII phy devices.
> >
> > The mdio1 is controlled by bits 4-7 of fpga register and mdio2 is
> > controlled by bits 0-3 of fpga register.
> >
> > Signed-off-by: Pankaj Bansal <pankaj.bansal@....com>
> > ---
> >
> > Notes:
> > V3:
> > - Add status = disabled in soc file and status = okay in board file
> > for external MDIO nodes
> > - Add interrupts property in external mdio nodes in soc file
> > V2:
> > - removed unnecassary TODO statements
> > - removed device_type from mdio nodes
> > - change the case of hex number to lowercase
> > - removed board specific comments from soc file
> >
> > .../boot/dts/freescale/fsl-lx2160a-qds.dts | 123 +++++++++++++++++
> > .../boot/dts/freescale/fsl-lx2160a.dtsi | 22 +++
> > 2 files changed, 145 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> > index 99a22abbe725..079264b391a2 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> > @@ -35,6 +35,14 @@
> > status = "okay";
> > };
> >
> > +&emdio1 {
> > + status = "okay";
> > +};
> > +
> > +&emdio2 {
> > + status = "okay";
> > +};
> > +
> > &esdhc0 {
> > status = "okay";
> > };
> > @@ -46,6 +54,121 @@
> > &i2c0 {
> > status = "okay";
> >
> > + fpga@66 {
> > + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c";
> > + reg = <0x66>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + mdio-mux-1@54 {
> > + mdio-parent-bus = <&emdio1>;
> > + reg = <0x54>; /* BRDCFG4 */
> > + mux-mask = <0xf8>; /* EMI1_MDIO */
> > + #address-cells=<1>;
> > + #size-cells = <0>;
> > +
> > + mdio@0 {
> > + reg = <0x00>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
>
> Please have a newline between nodes. It doesn't deserve a respin though. I
> can fix them up when applying if Leo is fine with this version.
I think there should be a compatible string defined for the binding of parent node mdio-mux, probably "mdio-mux-regmap", and be used here in the device tree.
>
> Shawn
>
> > + mdio@40 {
> > + reg = <0x40>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@c0 {
> > + reg = <0xc0>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@c8 {
> > + reg = <0xc8>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@d0 {
> > + reg = <0xd0>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@d8 {
> > + reg = <0xd8>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@e0 {
> > + reg = <0xe0>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@e8 {
> > + reg = <0xe8>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@f0 {
> > + reg = <0xf0>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@f8 {
> > + reg = <0xf8>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + };
> > +
> > + mdio-mux-2@54 {
> > + mdio-parent-bus = <&emdio2>;
> > + reg = <0x54>; /* BRDCFG4 */
> > + mux-mask = <0x07>; /* EMI2_MDIO */
> > + #address-cells=<1>;
> > + #size-cells = <0>;
> > +
> > + mdio@0 {
> > + reg = <0x00>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@1 {
> > + reg = <0x01>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@2 {
> > + reg = <0x02>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@3 {
> > + reg = <0x03>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@4 {
> > + reg = <0x04>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@5 {
> > + reg = <0x05>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@6 {
> > + reg = <0x06>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + mdio@7 {
> > + reg = <0x07>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + };
> > + };
> > +
> > i2c-mux@77 {
> > compatible = "nxp,pca9547";
> > reg = <0x77>;
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > index a79f5c1ea56d..7def5252ac1a 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > @@ -762,5 +762,27 @@
> > <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> > dma-coherent;
> > };
> > +
> > + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
> > + emdio1: mdio@...6000 {
> > + compatible = "fsl,fman-memac-mdio";
> > + reg = <0x0 0x8b96000 0x0 0x1000>;
> > + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + little-endian; /* force the driver in LE mode */
> > + status = "disabled";
> > + };
> > +
> > + /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
> > + emdio2: mdio@...7000 {
> > + compatible = "fsl,fman-memac-mdio";
> > + reg = <0x0 0x8b97000 0x0 0x1000>;
> > + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + little-endian; /* force the driver in LE mode */
> > + status = "disabled";
> > + };
> > };
> > };
> > --
> > 2.17.1
> >
Powered by blists - more mailing lists