Message-Id: <1550034844-10850-3-git-send-email-vishal@chelsio.com>
Date:   Wed, 13 Feb 2019 10:44:04 +0530
From:   Vishal Kulkarni <vishal@...lsio.com>
To:     netdev@...r.kernel.org, davem@...emloft.net
Cc:     nirranjan@...lsio.com, indranil@...lsio.com, dt@...lsio.com,
        Vishal Kulkarni <vishal@...lsio.com>
Subject: [PATCH net-next 2/2] cxgb4: Add capability to get/set SGE Doorbell Queue Timer Tick

This patch gets/sets SGE Doorbell Queue timer ticks via ethtool

Original work by: Casey Leedom <leedom@...lsio.com>

Signed-off-by: Vishal Kulkarni <vishal@...lsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h         |   1 +
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 187 ++++++++++++++++++++-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    |  14 +-
 3 files changed, 196 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 68d0d45..b7b0eb1 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -819,6 +819,7 @@ struct sge {
 	u16 nqs_per_uld;	    /* # of Rx queues per ULD */
 	u16 timer_val[SGE_NTIMERS];
 	u8 counter_val[SGE_NCOUNTERS];
+	u16 dbqtimer_tick;
 	u16 dbqtimer_val[SGE_NDBQTIMERS];
 	u32 fl_pg_order;            /* large page allocation size */
 	u32 stat_len;               /* length of status page at ring end */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 7960435..c075f65 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -932,11 +932,188 @@ static int get_adaptive_rx_setting(struct net_device *dev)
 	return q->rspq.adaptive_rx;
 }
 
-static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+/* Return the current global Adapter SGE Doorbell Queue Timer Tick for all
+ * Ethernet TX Queues.
+ */
+static int get_dbqtimer_tick(struct net_device *dev)
+{
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+
+	if (!(adap->flags & SGE_DBQ_TIMER))
+		return 0;
+
+	return adap->sge.dbqtimer_tick;
+}
+
+/* Return the SGE Doorbell Queue Timer Value for the Ethernet TX Queues
+ * associated with a Network Device.
+ */
+static int get_dbqtimer(struct net_device *dev)
+{
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+	struct sge_eth_txq *txq = &adap->sge.ethtxq[pi->first_qset];
+
+	if (!(adap->flags & SGE_DBQ_TIMER))
+		return 0;
+
+	/* all of the TX Queues use the same Timer Index */
+	return adap->sge.dbqtimer_val[txq->dbqtimerix];
+}
+
+/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX
+ * Queues.  This is the fundamental "Tick" that sets the scale of values which
+ * can be used.  Individual Ethernet TX Queues index into a relatively small
+ * array of Tick Multipliers.  Changing the base Tick will thus change all of
+ * the resulting Timer Values associated with those multipliers for all
+ * Ethernet TX Queues.
+ */
+static int set_dbqtimer_tick(struct net_device *dev, int usecs)
+{
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+	struct sge *s = &adap->sge;
+	u32 param, val;
+	int ret;
+
+	if (!(adap->flags & SGE_DBQ_TIMER))
+		return 0;
+
+	/* return early if it's the same Timer Tick we're already using */
+	if (s->dbqtimer_tick == usecs)
+		return 0;
+
+	/* attempt to set the new Timer Tick value */
+	param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+		 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK));
+	val = usecs;
+	ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, &param, &val);
+	if (ret)
+		return ret;
+	s->dbqtimer_tick = usecs;
+
+	/* if successful, reread resulting dependent Timer values */
+	ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(s->dbqtimer_val),
+				    s->dbqtimer_val);
+	return ret;
+}
+
+/* Set the SGE Doorbell Queue Timer Value for the Ethernet TX Queues
+ * associated with a Network Device.  There is a relatively small array of
+ * possible Timer Values so we need to pick the closest value available.
+ */
+static int set_dbqtimer(struct net_device *dev, int usecs)
 {
-	set_adaptive_rx_setting(dev, c->use_adaptive_rx_coalesce);
-	return set_rx_intr_params(dev, c->rx_coalesce_usecs,
-				  c->rx_max_coalesced_frames);
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+	struct sge *s = &adap->sge;
+	struct sge_eth_txq *txq;
+	u32 param, val;
+	int qix, timerix, min_timerix, delta, min_delta;
+	int ret;
+
+	if (!(adap->flags & SGE_DBQ_TIMER))
+		return 0;
+
+	/* Find the SGE Doorbell Timer Value that's closest to the requested
+	 * value.
+	 */
+	min_delta = INT_MAX;
+	min_timerix = 0;
+	for (timerix = 0; timerix < ARRAY_SIZE(s->dbqtimer_val); timerix++) {
+		delta = s->dbqtimer_val[timerix] - usecs;
+		if (delta < 0)
+			delta = -delta;
+		if (delta < min_delta) {
+			min_delta = delta;
+			min_timerix = timerix;
+		}
+	}
+
+	/* Return early if it's the same Timer Index we're already using.
+	 * We use the same Timer Index for all of the TX Queues for an
+	 * interface so it's only necessary to check the first one.
+	 */
+	txq = &s->ethtxq[pi->first_qset];
+	if (txq->dbqtimerix == min_timerix)
+		return 0;
+
+	for (qix = 0; qix < pi->nqsets; qix++, txq++) {
+		if (adap->flags & FULL_INIT_DONE) {
+			param =
+			 (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
+			  FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_EQ_TIMERIX) |
+			  FW_PARAMS_PARAM_YZ_V(txq->q.cntxt_id));
+			val = min_timerix;
+			ret = t4_set_params(adap, adap->mbox, adap->pf, 0,
+					    1, &param, &val);
+			if (ret)
+				return ret;
+		}
+		txq->dbqtimerix = min_timerix;
+	}
+	return 0;
+}
+
+/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX
+ * Queues and the Timer Value for the Ethernet TX Queues associated with a
+ * Network Device.  Since changing the global Tick changes all of the
+ * available Timer Values, we need to do this first before selecting the
+ * resulting closest Timer Value.  Moreover, since the Tick is global,
+ * changing it affects the Timer Values for all Network Devices on the
+ * adapter.  So, before changing the Tick, we grab all of the current Timer
+ * Values for other Network Devices on this Adapter and then attempt to select
+ * new Timer Values which are close to the old values ...
+ */
+static int set_dbqtimer_tickval(struct net_device *dev,
+				int tick_usecs, int timer_usecs)
+{
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+	int timer[MAX_NPORTS];
+	unsigned int port;
+	int ret;
+
+	/* Grab the other adapter Network Interface current timers and fill in
+	 * the new one for this Network Interface.
+	 */
+	for_each_port(adap, port)
+		if (port == pi->port_id)
+			timer[port] = timer_usecs;
+		else
+			timer[port] = get_dbqtimer(adap->port[port]);
+
+	/* Change the global Tick first ... */
+	ret = set_dbqtimer_tick(dev, tick_usecs);
+	if (ret)
+		return ret;
+
+	/* ... and then set all of the Network Interface Timer Values ... */
+	for_each_port(adap, port) {
+		ret = set_dbqtimer(adap->port[port], timer[port]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int set_coalesce(struct net_device *dev,
+			struct ethtool_coalesce *coalesce)
+{
+	int ret;
+
+	set_adaptive_rx_setting(dev, coalesce->use_adaptive_rx_coalesce);
+
+	ret = set_rx_intr_params(dev, coalesce->rx_coalesce_usecs,
+				 coalesce->rx_max_coalesced_frames);
+	if (ret)
+		return ret;
+
+	return set_dbqtimer_tickval(dev,
+				    coalesce->tx_coalesce_usecs_irq,
+				    coalesce->tx_coalesce_usecs);
 }
 
 static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
@@ -949,6 +1126,8 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
 	c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN_F) ?
 		adap->sge.counter_val[rq->pktcnt_idx] : 0;
 	c->use_adaptive_rx_coalesce = get_adaptive_rx_setting(dev);
+	c->tx_coalesce_usecs_irq = get_dbqtimer_tick(dev);
+	c->tx_coalesce_usecs = get_dbqtimer(dev);
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index bdd11a6..bcbac24 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -4331,8 +4331,18 @@ static int adap_init0(struct adapter *adap)
 	/* Grab the SGE Doorbell Queue Timer values.  If successful, that
 	 * indicates that the Firmware and Hardware support this.
 	 */
-	ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(adap->sge.dbqtimer_val),
-				    adap->sge.dbqtimer_val);
+	params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+		    FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK));
+	ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
+			      1, params, val);
+
+	if (!ret) {
+		adap->sge.dbqtimer_tick = val[0];
+		ret = t4_read_sge_dbqtimers(adap,
+					    ARRAY_SIZE(adap->sge.dbqtimer_val),
+					    adap->sge.dbqtimer_val);
+	}
+
 	if (!ret)
 		adap->flags |= SGE_DBQ_TIMER;
 
-- 
1.8.3.1

Powered by blists - more mailing lists