lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VI1PR04MB4880C9EF6C9EBFCAA2209DD596670@VI1PR04MB4880.eurprd04.prod.outlook.com>
Date:   Thu, 14 Feb 2019 15:33:12 +0000
From:   Claudiu Manoil <claudiu.manoil@....com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     Shawn Guo <shawnguo@...nel.org>, Leo Li <leoyang.li@....com>,
        "David S . Miller" <davem@...emloft.net>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        Alexandru Marginean <alexandru.marginean@....com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: RE: [PATCH net-next 2/3] arm64: dts: fsl: ls1028a-rdb: Add ENETC
 external eth ports for the LS1028A RDB board

>-----Original Message-----
>From: Andrew Lunn <andrew@...n.ch>
>Sent: Wednesday, February 13, 2019 8:16 PM
>To: Claudiu Manoil <claudiu.manoil@....com>
>Cc: Shawn Guo <shawnguo@...nel.org>; Leo Li <leoyang.li@....com>; David S .
>Miller <davem@...emloft.net>; devicetree@...r.kernel.org; Alexandru
>Marginean <alexandru.marginean@....com>; linux-kernel@...r.kernel.org;
>linux-arm-kernel@...ts.infradead.org; netdev@...r.kernel.org
>Subject: Re: [PATCH net-next 2/3] arm64: dts: fsl: ls1028a-rdb: Add ENETC
>external eth ports for the LS1028A RDB board
>
>On Wed, Feb 13, 2019 at 01:02:22PM +0200, Claudiu Manoil wrote:
>> The LS1028A RDB board features an Atheros PHY connected over SGMII to
>> the ENETC PF0 (or Port0).  ENETC Port1 (PF1) has no external
>> connection on this board, so it can be disabled for now.
>>
>> Signed-off-by: Alex Marginean <alexandru.marginean@....com>
>> Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
>> ---
>>  arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15
>> +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
>> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
>> index fdeb417..c8487893 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
>> @@ -71,3 +71,18 @@
>>  &duart1 {
>>  	status = "okay";
>>  };
>> +
>> +&enetc_port0 {
>> +	phy-handle = <&sgmii_phy0>;
>> +	phy-connection-type = "sgmii";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +
>> +	sgmii_phy0: ethernet-phy@2 {
>> +		reg = <0x2>;
>> +	};
>> +};
>> +
>
>Hi Claudiu
>
>It is better to use:
>
>&enetc_port0 {
>	phy-handle = <&sgmii_phy0>;
>	phy-connection-type = "sgmii";
>	#address-cells = <1>;
>	#size-cells = <0>;
>
>	mdio {
>		sgmii_phy0: ethernet-phy@2 {
>			reg = <0x2>;
>		};
>	};
>};

Hi Andrew,

The extra node for mdio seems to complicate things somewhat. 
Just adding this node seems not enough.  How to find out easily if a child 
of a enetc port node is a mdio node? I was thinking to use device_type
for that, like this:

&enetc_port0 {
	phy-handle = <&sgmii_phy0>;
	phy-connection-type = "sgmii";
	mdio {
		#address-cells = <1>;
		#size-cells = <0>;
		device_type = "mdio";
		sgmii_phy0: ethernet-phy@2 {
			reg = <0x2>;
		};
	};
};

Would you agree with this?

Thanks,
Claudiu

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ