[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <981d58bb-3300-d161-1d9f-992ba2393123@gmail.com>
Date: Sat, 16 Feb 2019 20:11:47 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
David Miller <davem@...emloft.net>,
Russell King - ARM Linux <linux@...linux.org.uk>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next 2/2] net: phy: marvell10g: improve mv3310_config_aneg
Now that genphy_c45_pma_setup_forced() makes sure the "aneg enabled"
bit is cleared, the call to genphy_c45_an_disable_aneg() isn't needed
any longer. And the code pattern is now the same as in
genphy_config_aneg().
Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
drivers/net/phy/marvell10g.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 496805c0d..4a6ae63ab 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -271,13 +271,8 @@ static int mv3310_config_aneg(struct phy_device *phydev)
/* We don't support manual MDI control */
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
- if (phydev->autoneg == AUTONEG_DISABLE) {
- ret = genphy_c45_pma_setup_forced(phydev);
- if (ret < 0)
- return ret;
-
- return genphy_c45_an_disable_aneg(phydev);
- }
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ return genphy_c45_pma_setup_forced(phydev);
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
--
2.20.1
Powered by blists - more mailing lists