[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190218143629.28392-2-peter.ujfalusi@ti.com>
Date: Mon, 18 Feb 2019 16:36:28 +0200
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: <tony@...mide.com>
CC: <bcousson@...libre.com>, <linux-omap@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <nsekhar@...com>,
<grygorii.strashko@...com>, <vkoul@...nel.org>,
<netdev@...r.kernel.org>, <f.fainelli@...il.com>,
<marc.w.gonzalez@...e.fr>, <niklas.cassel@...aro.org>
Subject: [PATCH 1/2] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.
The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 172c0224e7f6..b128998097ce 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -651,13 +651,13 @@
&cpsw_emac0 {
phy-handle = <ðphy0>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy-handle = <ðphy1>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists