netdev - Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190218211035.GA28145@bogus>
Date:   Mon, 18 Feb 2019 15:10:35 -0600
From:   Rob Herring <robh@...nel.org>
To:     Vasily Khoruzhick <anarsoul@...il.com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-bluetooth@...r.kernel.org
Subject: Re: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth

On Fri, Jan 18, 2019 at 09:02:27AM -0800, Vasily Khoruzhick wrote:
> Add binding document for bluetooth part of RTL8723BS/RTL8723CS
> 
> Signed-off-by: Vasily Khoruzhick <anarsoul@...il.com>
> ---
>  .../bindings/net/rtl8723bs-bluetooth.txt      | 35 +++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
> new file mode 100644
> index 000000000000..8357f242ae4c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
> @@ -0,0 +1,35 @@
> +RTL8723BS/RTL8723CS Bluetooth
> +---------------------
> +
> +RTL8723CS/RTL8723CS is WiFi + BT chip. WiFi part is connected over SDIO, while
> +BT is connected over serial. It speaks H5 protocol with few extra commands
> +to upload firmware and change module speed.
> +
> +Required properties:
> +
> + - compatible: should be one of the following:
> +   * "realtek,rtl8723bs-bt"
> +   * "realtek,rtl8723cs-bt"
> +Optional properties:
> +
> + - device-wake-gpios: GPIO specifier, used to wakeup the BT module (active high)
> + - enable-gpios: GPIO specifier, used to enable the BT module (active high)
> + - host-wake-gpios: GPIO specifier, used to wakeup the host processor (active high)
> + - firmware-postfix: firmware postfix to be used for firmware config

How is this used?

Rob