netdev - Re: [EXT] Re: [PATCH net-next 10/13] net: mvpp2: reset the XPCS while reconfiguring the serdes lanes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190218112815.ec3pyuvzpphdance@shell.armlinux.org.uk>
Date:   Mon, 18 Feb 2019 11:28:15 +0000
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Stefan Chulski <stefanc@...vell.com>
Cc:     Antoine Tenart <antoine.tenart@...tlin.com>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "thomas.petazzoni@...tlin.com" <thomas.petazzoni@...tlin.com>,
        "maxime.chevallier@...tlin.com" <maxime.chevallier@...tlin.com>,
        "gregory.clement@...tlin.com" <gregory.clement@...tlin.com>,
        "miquel.raynal@...tlin.com" <miquel.raynal@...tlin.com>,
        Nadav Haklai <nadavh@...vell.com>,
        Yan Markman <ymarkman@...vell.com>,
        "mw@...ihalf.com" <mw@...ihalf.com>
Subject: Re: [EXT] Re: [PATCH net-next 10/13] net: mvpp2: reset the XPCS
 while reconfiguring the serdes lanes

Hi Stefan,

On Mon, Feb 18, 2019 at 11:08:34AM +0000, Stefan Chulski wrote:
> HW recommendation upon Serdes reconfiguration are the following:
> 
> 1. Disable port(CTRL0_REG - in XLG/GMAC) 
> 2. Put port in reset (both XLG/GMAC)
> 3. For KR - put in reset MPCS (MAC control clock, RX SD clock, TX SD clock), XPSC is RXAUI/XAUI clock domain
> 4. Power down Serdes lane
> 
> Do reconfiguration of Serdes.
> 
> 5. Enable Serdes lane
> 6. Disable MPCS reset for KR
> 7. Disable port reset (both XLG/GMAC)
> 8. Enable port  (both XLG/GMAC)

For clarity, presumably either the XLG or the GMAC should be released
from reset and enabled at any one time depending on the configured mode,
but never both together?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up