[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190218130352.9373-1-vkoul@kernel.org>
Date: Mon, 18 Feb 2019 18:33:51 +0530
From: Vinod Koul <vkoul@...nel.org>
To: David S Miller <davem@...emloft.net>
Cc: linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Vinod Koul <vkoul@...nel.org>, netdev@...r.kernel.org,
Niklas Cassel <niklas.cassel@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Michal Vokáč <michal.vokac@...ft.com>
Subject: [PATCH] net: dsa: qca8k: Enable delay for RGMII_ID mode
RGMII_ID specifies that we should have internal delay, so resurrect the
delay addition routine but under the RGMII_ID mode.
Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode")
Signed-off-by: Vinod Koul <vkoul@...nel.org>
---
drivers/net/dsa/qca8k.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index a4b6cda38016..aa1f7f1b20d3 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -443,6 +443,18 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
val = QCA8K_PORT_PAD_RGMII_EN;
qca8k_write(priv, reg, val);
break;
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ /* RGMII_ID needs internal delay. This is enabled through
+ * PORT5_PAD_CTRL for all ports, rather than individual port
+ * registers
+ */
+ qca8k_write(priv, reg,
+ QCA8K_PORT_PAD_RGMII_EN |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY(3) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY(3));
+ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ break;
case PHY_INTERFACE_MODE_SGMII:
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
break;
--
2.20.1
Powered by blists - more mailing lists