Message-ID: <20190219053839.2087048-1-brakmo@fb.com>
Date:   Mon, 18 Feb 2019 21:38:39 -0800
From:   brakmo <brakmo@...com>
To:     netdev <netdev@...r.kernel.org>
CC:     Martin Lau <kafai@...com>, Alexei Starovoitov <ast@...com>,
        Daniel Borkmann --cc=Kernel Team 
        <"daniel@...earbox.netKernel-team"@fb.com>
Subject: [PATCH bpf-next 9/9] bpf: NRM test script

Script for testing NRM (Network Resource Manager) framework.
It creates a cgroup to use for testing and load a BPF program to limit
egress bandwidht. It then uses iperf3 or netperf to create
loads. The output is the goodput in Mbps (unless -D is used).

It can work on a single host using loopback or among two hosts (with netperf).
When using loopback, it is recommended to also introduce a delay of at least
1ms (-d=1), otherwise the assigned bandwidth is likely to be underutilized.

USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>] [-D]
             [-d=<delay>|--delay=<delay>] [--debug] [-E]
             [-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >] [-l]
	     [-N] [-p=<port>|--port=<port>] [-P] [-q=<qdisc>]
             [-R] [-s=<server>|--server=<server] [--stats]
	     [-t=<time>|--time=<time>] [-w] [cubic|dctcp]
  Where:
    out               Egress (default egress)
    -b or --bpf       BPF program filename to load and attach.
                      Default is nrm_out_kern.o for egress,
                      nrm_in_kern.o for ingress
    -c or -cc         TCP congestion control (cubic or dctcp)
    -d or --delay     Add a delay in ms using netem
    -D                In addition to the goodput in Mbps, it also outputs
                      other detailed information. This information is
                      test dependent (i.e. iperf3 or netperf).
    --debug           Print BPF trace buffer
    -E                Enable ECN (not required for dctcp)
    -f or --flows     Number of concurrent flows (default=1)
    -i or --id        cgroup id (an integer, default is 1)
    -l                Do not limit flows using loopback
    -N                Use netperf instead of iperf3
    -h                Help
    -p or --port      iperf3 port (default is 5201)
    -P                Use an iperf3 instance for each flow
    -q                Use the specified qdisc.
    -r or --rate      Rate in Mbps (default 1s 1Gbps)
    -R                Use TCP_RR for netperf. 1st flow has req
                      size of 10KB, rest of 1MB. Reply in all
                      cases is 1 byte.
                      More detailed output for each flow can be found
                      in the files netperf.<cg>.<flow>, where <cg> is the
                      cgroup id as specified with the -i flag, and <flow>
                      is the flow id starting at 1 and increasing by 1 for
                      flow (as specified by -f).
    -s or --server    hostname of netperf server. Used to create netperf
                      test traffic between to hosts (default is within host)
                      netserver must be running on the host.
    --stats           Get NRM stats (marked, dropped, etc.)
    -t or --time      duration of iperf3 in seconds (default=5)
    -w                Work conserving flag. cgroup can increase its
                      bandwidth beyond the rate limit specified
                      while there is available bandwidth. Current
                      implementation assumes there is only one NIC
                      (eth0), but can be extended to support multiple
                      NICs. This is just a proof of concept.
    cubic or dctcp    specify TCP CC to use

Examples:
 ./do_nrm_test.sh -l -d=1 -D --stats
     Runs a 5 second test, using a single iperf3 flow and with the default
     rate limit of 1Gbps and a delay of 1ms (using netem) using the default
     TCP congestion control on the loopback device (hence we use "-l" to
     enforce bandwidth limit on loopback device). Since no direction is
     specified, it defaults to egress. Since no TCP CC algorithm is
     specified it uses the system default.
     With no -D flag, only the value of the AGGREGATE OUTPUT would show.
     id refers to the cgroup id and is useful when running multi cgroup
     tests (see do_nrm_test_multi.sh script).
   Output:
     Details for NRM in cgroup 1
     id:1
     rate_mbps:713
     duration:4.9 secs
     packets:10072
     bytes_MB:468
     pkts_dropped:491
     bytes_dropped_MB:32
     pkts_marked_percent: 28.64
     bytes_marked_percent: 29.15
     pkts_dropped_percent:  4.87
     bytes_dropped_percent:  6.86
     PING AVG DELAY:2.072
     AGGREGATE_GOODPUT:729

./do_nrm_test.sh -l -d=1 -D --stats dctcp
     Same as above but using dctcp. Note that fewer bytes are dropped
     (0.13 vs. 6.86%).
   Output:
     Details for NRM in cgroup 1
     id:1
     rate_mbps:932
     duration:4.9 secs
     packets:15514
     bytes_MB:570
     pkts_dropped:11
     bytes_dropped_MB:0
     pkts_marked_percent: 40.38
     bytes_marked_percent: 46.82
     pkts_dropped_percent:  0.07
     bytes_dropped_percent:  0.13
     PING AVG DELAY:2.069
     AGGREGATE_GOODPUT:953

./do_nrm_test.sh -d=1 -D --stats
     As first example, but without limiting loopback device (i.e. no
     "-l" flag). Since there is no bandwidth limiting, no details for
     NRM are printed out.
   Output:
     Details for NRM in cgroup 1
     PING AVG DELAY:2.021
     AGGREGATE_GOODPUT:40226

./do_nrm_test.sh -l -d=1 -D --stats -f=2
     Uses iper3 and does 2 flows
./do_nrm_test.sh -l -d=1 -D --stats -f=4 -P
     Uses iperf3 and does 4 flows, each flow as a separate process.
./do_nrm_test.sh -l -d=1 -D --stats -f=4 -N
     Uses netperf, 4 flows
./do_nrm_test.sh -f=1 -r=2000 -t=5 -N -D --stats dctcp -s=<server-name>
     Uses netperf between two hosts. The remote host name is specified
     with -s= and you need to start the program netserver manually on
     the remote host. It will use 1 flow, a rate limit of 2Gbps and dctcp.
./do_nrm_test.sh -f=1 -r=2000 -t=5 -N -D --stats -w dctcp \
     -s=<server-name>
     As previous, but allows use of extra bandwidth. For this test the
     rate is 8Gbps vs. 1Gbps of the previous test.

Signed-off-by: Lawrence Brakmo <brakmo@...com>
---
 samples/bpf/do_nrm_test.sh | 429 +++++++++++++++++++++++++++++++++++++
 1 file changed, 429 insertions(+)
 create mode 100755 samples/bpf/do_nrm_test.sh

diff --git a/samples/bpf/do_nrm_test.sh b/samples/bpf/do_nrm_test.sh
new file mode 100755
index 000000000000..c068c6e889d9
--- /dev/null
+++ b/samples/bpf/do_nrm_test.sh
@@ -0,0 +1,429 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019 Facebook
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of version 2 of the GNU General Public
+# License as published by the Free Software Foundation.
+
+Usage() {
+  echo "Script for testing NRM (Network Resource Manager) framework."
+  echo "It creates a cgroup to use for testing and load a BPF program to limit"
+  echo "egress or ingress bandwidht. It then uses iperf3 or netperf to create"
+  echo "loads. The output is the goodput in Mbps (unless -D was used)."
+  echo ""
+  echo "USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>] [-D]"
+  echo "             [-d=<delay>|--delay=<delay>] [--debug] [-E]"
+  echo "             [-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >]"
+  echo "             [-l] [-N] [-p=<port>|--port=<port>] [-P]"
+  echo "             [-q=<qdisc>] [-R] [-s=<server>|--server=<server]"
+  echo "             [-S|--stats] -t=<time>|--time=<time>] [-w] [cubic|dctcp]"
+  echo "  Where:"
+  echo "    out               egress (default)"
+  echo "    -b or --bpf       BPF program filename to load and attach."
+  echo "                      Default is nrm_out_kern.o for egress,"
+  echo "                      nrm_in_kern.o for ingress"
+  echo "    -c or -cc         TCP congestion control (cubic or dctcp)"
+  echo "    --debug           print BPF trace buffer"
+  echo "    -d or --delay     add a delay in ms using netem"
+  echo "    -D                In addition to the goodput in Mbps, it also outputs"
+  echo "                      other detailed information. This information is"
+  echo "                      test dependent (i.e. iperf3 or netperf)."
+  echo "    -E                enable ECN (not required for dctcp)"
+  echo "    -f or --flows     number of concurrent flows (default=1)"
+  echo "    -i or --id        cgroup id (an integer, default is 1)"
+  echo "    -N                use netperf instead of iperf3"
+  echo "    -l                do not limit flows using loopback"
+  echo "    -h                Help"
+  echo "    -p or --port      iperf3 port (default is 5201)"
+  echo "    -P                use an iperf3 instance for each flow"
+  echo "    -q                use the specified qdisc"
+  echo "    -r or --rate      rate in Mbps (default 1s 1Gbps)"
+  echo "    -R                Use TCP_RR for netperf. 1st flow has req"
+  echo "                      size of 10KB, rest of 1MB. Reply in all"
+  echo "                      cases is 1 byte."
+  echo "                      More detailed output for each flow can be found"
+  echo "                      in the files netperf.<cg>.<flow>, where <cg> is the"
+  echo "                      cgroup id as specified with the -i flag, and <flow>"
+  echo "                      is the flow id starting at 1 and increasing by 1 for"
+  echo "                      flow (as specified by -f)."
+  echo "    -s or --server    hostname of netperf server. Used to create netperf"
+  echo "                      test traffic between to hosts (default is within host)"
+  echo "                      netserver must be running on the host."
+  echo "    -S or --stats     whether to update nrm stats (default is yes)."
+  echo "    -t or --time      duration of iperf3 in seconds (default=5)"
+  echo "    -w                Work conserving flag. cgroup can increase its"
+  echo "                      bandwidth beyond the rate limit specified"
+  echo "                      while there is available bandwidth. Current"
+  echo "                      implementation assumes there is only one NIC"
+  echo "                      (eth0), but can be extended to support multiple"
+  echo "                       NICs."
+  echo "    cubic or dctcp    specify which TCP CC to use"
+  echo " "
+  exit
+}
+
+#set -x
+
+debug_flag=0
+args="$@"
+name="$0"
+netem=0
+cc=x
+dir="-o"
+dir_name="out"
+dur=5
+flows=1
+id=1
+prog=""
+port=5201
+rate=1000
+multi_iperf=0
+flow_cnt=1
+use_netperf=0
+rr=0
+ecn=0
+details=0
+server=""
+qdisc=""
+flags=""
+do_stats=0
+
+function start_nrm () {
+  rm -f nrm.out
+  echo "./nrm $dir -n $id -r $rate -t $dur $flags $dbg $prog" > nrm.out
+  echo " " >> nrm.out
+  ./nrm $dir -n $id -r $rate -t $dur $flags $dbg $prog >> nrm.out 2>&1  &
+  echo $!
+}
+
+processArgs () {
+  for i in $args ; do
+    case $i in
+    # Support for upcomming ingress rate limiting
+    #in)         # support for upcoming ingress rate limiting
+    #  dir="-i"
+    #  dir_name="in"
+    #  ;;
+    out)
+      dir="-o"
+      dir_name="out"
+      ;;
+    -b=*|--bpf=*)
+      prog="${i#*=}"
+      ;;
+    -c=*|--cc=*)
+      cc="${i#*=}"
+      ;;
+    --debug)
+      flags="$flags -d"
+      debug_flag=1
+      ;;
+    -d=*|--delay=*)
+      netem="${i#*=}"
+      ;;
+    -D)
+      details=1
+      ;;
+    -E)
+     ecn=1
+     ;;
+    # Support for upcomming fq Early Departure Time egress rate limiting
+    #--edt)
+    # prog="nrm_out_edt_kern.o"
+    # qdisc="fq"
+    # ;;
+    -f=*|--flows=*)
+      flows="${i#*=}"
+      ;;
+    -i=*|--id=*)
+      id="${i#*=}"
+      ;;
+    -l)
+      flags="$flags -l"
+      ;;
+    -N)
+      use_netperf=1
+      ;;
+    -p=*|--port=*)
+      port="${i#*=}"
+      ;;
+    -P)
+      multi_iperf=1
+      ;;
+    -q=*)
+      qdisc="${i#*=}"
+      ;;
+    -r=*|--rate=*)
+      rate="${i#*=}"
+      ;;
+    -R)
+      rr=1
+      ;;
+    -s=*|--server=*)
+      server="${i#*=}"
+      ;;
+    -S|--stats)
+      flags="$flags -s"
+      do_stats=1
+      ;;
+    -t=*|--time=*)
+      dur="${i#*=}"
+      ;;
+    -w)
+      flags="$flags -w"
+      ;;
+    cubic)
+      cc=cubic
+      ;;
+    dctcp)
+      cc=dctcp
+      ;;
+    *)
+      echo "Unknown arg:$i"
+      Usage
+      ;;
+    esac
+  done
+}
+
+processArgs
+
+if [ $debug_flag -eq 1 ] ; then
+  rm -f nrm_out.log
+fi
+
+nrm_pid=$(start_nrm)
+usleep 100000
+
+host=`hostname`
+cg_base_dir=/sys/fs/cgroup
+cg_dir="$cg_base_dir/cgroup-test-work-dir/nrm$id"
+
+echo $$ >> $cg_dir/cgroup.procs
+
+ulimit -l unlimited
+
+rm -f ss.out
+rm -f nrm.$id.$dir_name
+if [ $ecn -ne 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_ecn=1
+fi
+
+if [ $use_netperf -eq 0 ] ; then
+  cur_cc=`sysctl -n net.ipv4.tcp_congestion_control`
+  if [ "$cc" != "x" ] ; then
+    sysctl -w -q -n net.ipv4.tcp_congestion_control=$cc
+  fi
+fi
+
+if [ "$netem" -ne "0" ] ; then
+  if [ "$qdisc" != "" ] ; then
+    echo "WARNING: Ignoring -q options because -d option used"
+  fi
+  tc qdisc del dev lo root > /dev/null 2>&1
+  tc qdisc add dev lo root netem delay $netem\ms > /dev/null 2>&1
+elif [ "$qdisc" != "" ] ; then
+  tc qdisc del dev lo root > /dev/null 2>&1
+  tc qdisc add dev lo root $qdisc > /dev/null 2>&1
+fi
+
+n=0
+m=$[$dur * 5]
+hn="::1"
+if [ $use_netperf -ne 0 ] ; then
+  if [ "$server" != "" ] ; then
+    hn=$server
+  fi
+fi
+(while [ $n -lt $m ] ; \
+ do ss -6 -i -t -m -o state established "( dport = :$port )" >> ss.out ; \
+    n=$[n+1] ; usleep 200000 ; done \
+ ) &
+
+( ping6 -i 0.2 -c $m $hn > ping.out 2>&1 ) &
+
+if [ $use_netperf -ne 0 ] ; then
+  begNetserverPid=`ps ax | grep netserver | grep --invert-match "grep" | \
+                   awk '{ print $1 }'`
+  if [ "$begNetserverPid" == "" ] ; then
+    if [ "$server" == "" ] ; then
+      ( ./netserver > /dev/null 2>&1) &
+      usleep 100000
+    fi
+  fi
+  flow_cnt=1
+  if [ "$server" == "" ] ; then
+    np_server=$host
+  else
+    np_server=$server
+  fi
+  if [ "$cc" == "x" ] ; then
+    np_cc=""
+  else
+    np_cc="-K $cc,$cc"
+  fi
+  replySize=1
+  while [ $flow_cnt -le $flows ] ; do
+    if [ $rr -ne 0 ] ; then
+      reqSize=1M
+      if [ $flow_cnt -eq 1 ] ; then
+        reqSize=10K
+      fi
+      if [ "$dir" == "-i" ] ; then
+        replySize=$reqSize
+        reqSize=1
+      fi
+      ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR  -- -r $reqSize,$replySize $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,REMOTE_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,LOCAL_RECV_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+    else
+      if [ "$dir" == "-i" ] ; then
+        ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR -- -r 1,10M $np_cc -k P50_LATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REMOTE_TRANSPORT_RETRANS,REMOTE_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+      else
+        ( ./netperf -H $np_server -l $dur -f m -j -t TCP_STREAM -- $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+      fi
+    fi
+    flow_cnt=$[flow_cnt+1]
+  done
+
+# sleep for duration of test (plus some buffer)
+  n=$[dur+2]
+  sleep $n
+
+# force graceful termination of netperf
+  pids=`pgrep netperf`
+  for p in $pids ; do
+    kill -SIGALRM $p
+  done
+
+  flow_cnt=1
+  rate=0
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for NRM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e nrm.$id.$dir_name ] ; then
+        cat nrm.$id.$dir_name
+      fi
+    fi
+  fi
+  while [ $flow_cnt -le $flows ] ; do
+    if [ "$dir" == "-i" ] ; then
+      r=`cat netperf.$id.$flow_cnt | grep -o "REMOTE_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"`
+    else
+      r=`cat netperf.$id.$flow_cnt | grep -o "LOCAL_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"`
+    fi
+    echo "rate for flow $flow_cnt: $r"
+    rate=$[rate+r]
+    if [ $details -ne 0 ] ; then
+      echo "-----"
+      echo "Details for cgroup $id, flow $flow_cnt"
+      cat netperf.$id.$flow_cnt
+    fi
+    flow_cnt=$[flow_cnt+1]
+  done
+  if [ $details -ne 0 ] ; then
+    echo ""
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+elif [ $multi_iperf -eq 0 ] ; then
+  (iperf3 -s -p $port -1 > /dev/null 2>&1) &
+  usleep 100000
+  iperf3 -c $host -p $port -i 0 -P $flows -f m -t $dur > iperf.$id
+  rates=`grep receiver iperf.$id | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*"`
+  rate=`echo $rates | grep -o "[0-9]*$"`
+
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for NRM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e nrm.$id.$dir_name ] ; then
+        cat nrm.$id.$dir_name
+      fi
+    fi
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+else
+  flow_cnt=1
+  while [ $flow_cnt -le $flows ] ; do
+    (iperf3 -s -p $port -1 > /dev/null 2>&1) &
+    ( iperf3 -c $host -p $port -i 0 -P 1 -f m -t $dur | grep receiver | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*" | grep -o "[0-9]*$" > iperf3.$id.$flow_cnt ) &
+    port=$[port+1]
+    flow_cnt=$[flow_cnt+1]
+  done
+  n=$[dur+1]
+  sleep $n
+  flow_cnt=1
+  rate=0
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for NRM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e nrm.$id.$dir_name ] ; then
+        cat nrm.$id.$dir_name
+      fi
+    fi
+  fi
+
+  while [ $flow_cnt -le $flows ] ; do
+    r=`cat iperf3.$id.$flow_cnt`
+#    echo "rate for flow $flow_cnt: $r"
+  if [ $details -ne 0 ] ; then
+    echo "Rate for cgroup $id, flow $flow_cnt LOCAL_SEND_THROUGHPUT=$r"
+  fi
+    rate=$[rate+r]
+    flow_cnt=$[flow_cnt+1]
+  done
+  if [ $details -ne 0 ] ; then
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+fi
+
+if [ $use_netperf -eq 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_congestion_control=$cur_cc
+fi
+if [ $ecn -ne 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_ecn=0
+fi
+if [ "$netem" -ne "0" ] ; then
+  tc qdisc del dev lo root > /dev/null 2>&1
+fi
+
+sleep 2
+
+nrmPid=`ps ax | grep "nrm " | grep --invert-match "grep" | awk '{ print $1 }'`
+if [ "$nrmPid" == "$nrm_pid" ] ; then
+  kill $nrm_pid
+fi
+
+sleep 1
+
+if [ "$dir" == "-i" ] ; then
+  ./load_cg_skb -ri $cg_dir > /dev/null 2>&1
+else
+  ./load_cg_skb -r $cg_dir > /dev/null 2>&1
+fi
+
+if [ $use_netperf -ne 0 ] ; then
+  if [ "$server" == "" ] ; then
+    if [ "$begNetserverPid" == "" ] ; then
+      netserverPid=`ps ax | grep netserver | grep --invert-match "grep" | awk '{ print $1 }'`
+      if [ "$netserverPid" != "" ] ; then
+        kill $netserverPid
+      fi
+    fi
+  fi
+fi
+exit
-- 
2.17.1

Powered by blists - more mailing lists