lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Thu, 21 Feb 2019 14:25:58 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Rundong Ge <rdong.ge@...il.com>
Cc:     Florian Fainelli <f.fainelli@...il.com>, hkallweit1@...il.com,
        davem@...emloft.net, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: m88e6390_config_aneg will always reset the phy

On Thu, Feb 21, 2019 at 06:55:54PM +0800, Rundong Ge wrote:
> Hi Andrew
> 
> Before the "net: phy: marvell: Errata for mv88e6390 internal PHYs",
> phydev will only be soft reset when register value was changed.
> But after this patch, the phydev will always be reset when entering
> the "m88e6390_config_aneg".
> So is there any side effect of this change?

Hi Rundong

I tried to avoid the reset, but it does not appear you can read back
the magic values which got poked into the magic registers. So there is
no way to tell if the Errata has already been applied, e.g. by the
boot loader.

Side effects?

The PHY might work :-)

It might take a little bit longer to report link up, since there is an
additional soft reset.

	   Andrew

Powered by blists - more mailing lists