netdev - Re: [PATCH v5 0/5] M_CAN Framework re-write

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <43e01edf-9b9a-c68d-ec1a-218a8117f59e@grandegger.com>
Date:   Thu, 21 Feb 2019 17:41:27 +0100
From:   Wolfgang Grandegger <wg@...ndegger.com>
To:     Dan Murphy <dmurphy@...com>, mkl@...gutronix.de,
        davem@...emloft.net
Cc:     linux-can@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 0/5] M_CAN Framework re-write

Hello Dan,

I will have a closer look end of this week!

Wolfgang.

Am 21.02.19 um 17:24 schrieb Dan Murphy:
> Bump
> 
> On 2/14/19 12:27 PM, Dan Murphy wrote:
>> Hello
>>
>> OK I did not give up on this patch series just got a little preoccupied with
>> some other kernel work.  But here is the update per the comments.
>>
>> It should be understood I broke these out for reviewability.
>> For instance the first patch does not compile on its own as including this
>> patch should not change the current functionality and it pulls all the io-mapped
>> code from the m_can base file to a platfrom file.
>>
>> The next patch "Migrate the m_can code to use the framework"
>> is the change to the kernel for the io-mapped conversion from a flat file to use
>> the framework.  Finally the rename patch just renames the m_can_priv to 
>> m_can_classdev.  I broke this change out specifically for readability of the
>> migration patch per comments on the code.
>>
>> AFAIC the first 3 patches can all be squashed into a single patch.  Or the
>> first 2 patches in the series can be re-arranged but then m_can functionality is
>> affected in the migration patch.
>>
>> Again the first 3 patches here are all just for readability and review purposes.
>>
>> Dan
>>
>> Dan Murphy (5):
>>   can: m_can: Create a m_can platform framework
>>   can: m_can: Migrate the m_can code to use the framework
>>   can: m_can: Rename m_can_priv to m_can_classdev
>>   dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver
>>   can: tcan4x5x: Add tcan4x5x driver to the kernel
>>
>>  .../devicetree/bindings/net/can/tcan4x5x.txt  |  37 +
>>  drivers/net/can/m_can/Kconfig                 |  14 +-
>>  drivers/net/can/m_can/Makefile                |   2 +
>>  drivers/net/can/m_can/m_can.c                 | 788 +++++++++---------
>>  drivers/net/can/m_can/m_can.h                 | 159 ++++
>>  drivers/net/can/m_can/m_can_platform.c        | 198 +++++
>>  drivers/net/can/m_can/tcan4x5x.c              | 531 ++++++++++++
>>  7 files changed, 1320 insertions(+), 409 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/net/can/tcan4x5x.txt
>>  create mode 100644 drivers/net/can/m_can/m_can.h
>>  create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>  create mode 100644 drivers/net/can/m_can/tcan4x5x.c
>>
> 
>