lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <9074d29b-4cc9-87b6-009f-48280a4692c0@gmx.de> Date: Thu, 21 Feb 2019 18:27:41 +0100 From: Simon Huelck <simonmail@....de> To: Jerome Brunet <jbrunet@...libre.com>, Jose Abreu <jose.abreu@...opsys.com>, Martin Blumenstingl <martin.blumenstingl@...glemail.com> Cc: linux-amlogic@...ts.infradead.org, netdev@...r.kernel.org, alexandre.torgue@...com, Emiliano Ingrassia <ingrassia@...genesys.com>, Gpeppe.cavallaro@...com Subject: Re: stmmac / meson8b-dwmac Am 21.02.2019 um 15:21 schrieb Jerome Brunet: > On Tue, 2019-02-19 at 20:41 +0100, Simon Huelck wrote: >> Am 19.02.2019 um 09:47 schrieb Jose Abreu: >>> Hi Simon, >>> >>> On 2/18/2019 6:05 PM, Simon Huelck wrote: >>>> disabling EEE doesnt help ( did it via the entry in the .dtb / .dts ), >>>> the results are the same. I can confirm the LPI counters are zero or one >>>> only after the test..... >>> It's interesting to see that you have a lot of RX packets but few >>> RX interrupts. This can either be due to mis-configuration of >>> interrupt flags or RX Watchdog. >>> >>> 1. For interrupt flags you should be using LEVEL triggered IRQ. >>> 2. For RX Watchdog you can try disabling it by adding the >>> following in your platform wrapper driver (which will be >>> "dwmac-meson8b.c", at probe): >>> "plat_data->force_sf_dma_mode = 1;" and >>> "plat_data->riwt_off = 1;" >>> >>> Thanks, >>> Jose Miguel Abreu >> Hi, >> >> >> are you aware that odroid c2 dts is using level irq ? > The odroid-c2 (meson-gxl) is using level triggered irq, indeed. > For a reason that still eludes me, The odroid-c1 (meson8b) isn't. > > This is confusing since both boards have been mentionned in this thread. > >> at which numbers do you estimage that RX irqs are low in numbers ? >> >> >> regards, >> >> Simon >> >> >> _______________________________________________ >> linux-amlogic mailing list >> linux-amlogic@...ts.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-amlogic > Hi, this was changed recently, with a patch for the EEE stuff , see here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.0-rc7&id=e35e26b26e955c53e61c154ba26b9bb15da6b858 before that the IRQ stuff was differently. I tried to revert this patch via git locally, but had no success ( i guess git tried to revert this patch on the server :-P) regards, Simon
Powered by blists - more mailing lists