[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1gx93N-00046w-6j@rmk-PC.armlinux.org.uk>
Date: Fri, 22 Feb 2019 11:31:41 +0000
From: Russell King <rmk+kernel@...linux.org.uk>
To: linux-doc@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH net-next v2 1/2] net: phylink: update mac_config()
documentation
A detail for mac_config() had been missed in the documentation for the
method - it is expected that the method will update the MAC to the
settings, rather than completely reprogram the MAC on each call.
Update the documentation for this method for this detail.
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
include/linux/phylink.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index f57059e4353f..6411c624f63a 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -149,6 +149,13 @@ int mac_link_state(struct net_device *ndev,
* configuration word. Nothing is advertised by the MAC. The MAC is
* responsible for reading the configuration word and configuring
* itself accordingly.
+ *
+ * Implementations are expected to update the MAC to reflect the
+ * requested settings - i.o.w., if nothing has changed between two
+ * calls, no action is expected. If only flow control settings have
+ * changed, flow control should be updated *without* taking the link
+ * down. This "update" behaviour is critical to avoid bouncing the
+ * link up status.
*/
void mac_config(struct net_device *ndev, unsigned int mode,
const struct phylink_link_state *state);
--
2.7.4
Powered by blists - more mailing lists