netdev - [PATCH net-next v3 2/4] arm64: dts: fsl: ls1028a-rdb: Add ENETC external eth ports for the LS1028A RDB board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1550847859-17346-3-git-send-email-claudiu.manoil@nxp.com>
Date:   Fri, 22 Feb 2019 17:04:17 +0200
From:   Claudiu Manoil <claudiu.manoil@....com>
To:     Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
        "David S . Miller" <davem@...emloft.net>
Cc:     alexandru.marginean@....com, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH net-next v3 2/4] arm64: dts: fsl: ls1028a-rdb: Add ENETC external eth ports for the LS1028A RDB board

The LS1028A RDB board features an Atheros PHY connected over
SGMII to the ENETC PF0 (or Port0).  ENETC Port1 (PF1) has no
external connection on this board, so it can be disabled for now.

Signed-off-by: Alex Marginean <alexandru.marginean@....com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
---
v2 - added a mdio node as parent for the phy node
v3 - none

 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index fdeb417..f86b054 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -71,3 +71,20 @@
 &duart1 {
 	status = "okay";
 };
+
+&enetc_port0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sgmii_phy0: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+	};
+};
+
+&enetc_port1 {
+	status = "disabled";
+};
-- 
2.7.4