netdev - [PATCH V2 6/8] dt-bindings: net: stmmac: add syscfg clock property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1550824089-19961-7-git-send-email-christophe.roullier@st.com>
Date:   Fri, 22 Feb 2019 09:28:07 +0100
From:   Christophe Roullier <christophe.roullier@...com>
To:     <robh@...nel.org>, <davem@...emloft.net>, <joabreu@...opsys.com>,
        <mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
        <alexandre.torgue@...com>, <peppe.cavallaro@...com>
CC:     <linux-stm32@...md-mailman.stormreply.com>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>,
        <christophe.roullier@...com>, <andrew@...n.ch>
Subject: [PATCH V2 6/8] dt-bindings: net: stmmac: add syscfg clock property

Need syscfg clock for MCU family in case bootloader does not
activate it.

Signed-off-by: Christophe Roullier <christophe.roullier@...com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index f42dc68..524f8a0 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -14,8 +14,8 @@ Required properties:
 - clock-names: Should be "stmmaceth" for the host clock.
 	       Should be "mac-clk-tx" for the MAC TX clock.
 	       Should be "mac-clk-rx" for the MAC RX clock.
-	       For MPU family need to add also "ethstp" for power mode clock and,
-	                                       "syscfg-clk" for SYSCFG clock.
+	       Should be "syscfg-clk" for the SYSCFG clock.
+	       For MPU family need to add also "ethstp" for power mode clock
 - interrupt-names: Should contain a list of interrupt names corresponding to
            the interrupts in the interrupts property, if available.
 		   Should be "macirq" for the main MAC IRQ
-- 
2.7.4