netdev - [PATCH V2 0/8] stmmac: add some fixes for stm32

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1550824089-19961-1-git-send-email-christophe.roullier@st.com>
Date:   Fri, 22 Feb 2019 09:28:01 +0100
From:   Christophe Roullier <christophe.roullier@...com>
To:     <robh@...nel.org>, <davem@...emloft.net>, <joabreu@...opsys.com>,
        <mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
        <alexandre.torgue@...com>, <peppe.cavallaro@...com>
CC:     <linux-stm32@...md-mailman.stormreply.com>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>,
        <christophe.roullier@...com>, <andrew@...n.ch>
Subject: [PATCH V2 0/8] stmmac: add some fixes for stm32

For common stmmac:
	- Add support to set CSR Clock range selection in DT
For stm32mpu:
	- Glue codes to support magic packet
	- Glue codes to support all PHY config :
		PHY_MODE (MII,GMII, RMII, RGMII) and in normal,
		PHY wo crystal (25Mhz),
		PHY wo crystal (50Mhz), No 125Mhz from PHY config
For stm32mcu:
	- Add Ethernet support for stm32h7
	- Add syscfg clk support for stm32f4

Changes in V2:
  Apply remarks from andrew lunn
	- add all interfaces RGMII* 
	- reg value should be the same as ethernet-phy@X	

Christophe Roullier (8):
  net: ethernet: stmmac: manage Ethernet WoL for stm32mp157c.
  net: ethernet: stmmac: update to support all PHY config for
    stm32mp157c.
  dt-bindings: net: stmmac: add phys config properties
  net: ethernet: stmmac: add management of clk_csr property
  net: ethernet: stmmac: update to be compatible with MCU family
    (stm32f4, stm32h7)
  dt-bindings: net: stmmac: add syscfg clock property
  ARM: dts: stm32: Add Ethernet support on stm32h7 SOC and activate it
    for eval and disco boards
  ARM: dts: stm32: add syscfg clock support for Ethernet on STM32F429
    SoC

 .../devicetree/bindings/net/stm32-dwmac.txt        |  10 +-
 arch/arm/boot/dts/stm32f429.dtsi                   |   6 +-
 arch/arm/boot/dts/stm32h743-pinctrl.dtsi           |  15 ++
 arch/arm/boot/dts/stm32h743.dtsi                   |  19 +++
 arch/arm/boot/dts/stm32h743i-disco.dts             |  17 ++
 arch/arm/boot/dts/stm32h743i-eval.dts              |  17 ++
 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  | 182 +++++++++++++++++----
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   3 +
 8 files changed, 233 insertions(+), 36 deletions(-)

-- 
2.7.4