Message-ID: <20190223010703.678070-9-brakmo@fb.com>
Date:   Fri, 22 Feb 2019 17:07:02 -0800
From:   brakmo <brakmo@...com>
To:     netdev <netdev@...r.kernel.org>
CC:     Martin Lau <kafai@...com>, Alexei Starovoitov <ast@...com>,
        Daniel Borkmann <daniel@...earbox.net>,
        Eric Dumazet <eric.dumazet@...il.com>,
        Kernel Team <Kernel-team@...com>
Subject: [PATCH v2 bpf-next 8/9] bpf: User program for testing NRM

The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing NRM for egress traffic. One still needs to create
network traffic. This can be done through netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.

USAGE: nrm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
           [-w] [-h] [prog]
  Where:
   -d        Print BPF trace debug buffer
   -l        Also limit flows doing loopback
   -n <#>    To create cgroup "/nrm#" and attach prog. Default is /nrm1
             This is convenient when testing NRM in more than 1 cgroup
   -r <rate> Rate limit in Mbps
   -s        Get NRM stats (marked, dropped, etc.)
   -t <time> Exit after specified seconds (deault is 0)
   -w        Work conserving flag. cgroup can increase its bandwidth
             beyond the rate limit specified while there is available
             bandwidth. Current implementation assumes there is only
             NIC (eth0), but can be extended to support multiple NICs.
             Currrently only supported for egress. Note, this is just
	     a proof of concept.
   -h        Print this info
   prog      BPF program file name. Name defaults to nrm_out_kern.o for
             output, and nrm_in_ker.o for input.

More information about NRM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)

Signed-off-by: Lawrence Brakmo <brakmo@...com>
---
 samples/bpf/Makefile |   3 +
 samples/bpf/nrm.c    | 440 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 443 insertions(+)
 create mode 100644 samples/bpf/nrm.c

diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 897b467066fd..6186c9fc3179 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -53,6 +53,7 @@ hostprogs-y += xdpsock
 hostprogs-y += xdp_fwd
 hostprogs-y += task_fd_query
 hostprogs-y += xdp_sample_pkts
+hostprogs-y += nrm
 
 # Libbpf dependencies
 LIBBPF = $(TOOLS_PATH)/lib/bpf/libbpf.a
@@ -109,6 +110,7 @@ xdpsock-objs := xdpsock_user.o
 xdp_fwd-objs := xdp_fwd_user.o
 task_fd_query-objs := bpf_load.o task_fd_query_user.o $(TRACE_HELPERS)
 xdp_sample_pkts-objs := xdp_sample_pkts_user.o $(TRACE_HELPERS)
+nrm-objs := bpf_load.o nrm.o $(CGROUP_HELPERS)
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
@@ -268,6 +270,7 @@ $(src)/*.c: verify_target_bpf $(LIBBPF)
 
 $(obj)/tracex5_kern.o: $(obj)/syscall_nrs.h
 $(obj)/nrm_out_kern.o: $(src)/nrm.h $(src)/nrm_kern.h
+$(obj)/nrm.o: $(src)/nrm.h
 
 # asm/sysreg.h - inline assembly used by it is incompatible with llvm.
 # But, there is no easy way to fix it, so just exclude it since it is
diff --git a/samples/bpf/nrm.c b/samples/bpf/nrm.c
new file mode 100644
index 000000000000..ae2ab61b0fb3
--- /dev/null
+++ b/samples/bpf/nrm.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019 Facebook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * Example program for Network Resource Managmement
+ *
+ * This program loads a cgroup skb BPF program to enforce cgroup output
+ * (egress) or input (ingress) bandwidth limits.
+ *
+ * USAGE: nrm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>] [-w] [-h] [prog]
+ *   Where:
+ *    -d	Print BPF trace debug buffer
+ *    -l	Also limit flows doing loopback
+ *    -n <#>	To create cgroup \"/nrm#\" and attach prog
+ *		Default is /nrm1
+ *    -r <rate>	Rate limit in Mbps
+ *    -s	Get NRM stats (marked, dropped, etc.)
+ *    -t <time>	Exit after specified seconds (deault is 0)
+ *    -w	Work conserving flag. cgroup can increase its bandwidth
+ *		beyond the rate limit specified while there is available
+ *		bandwidth. Current implementation assumes there is only
+ *		NIC (eth0), but can be extended to support multiple NICs.
+ *		Currrently only supported for egress.
+ *    -h	Print this info
+ *    prog	BPF program file name. Name defaults to nrm_out_kern.o
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <sys/resource.h>
+#include <sys/time.h>
+#include <unistd.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/unistd.h>
+
+#include <linux/bpf.h>
+#include <bpf/bpf.h>
+
+#include "bpf_load.h"
+#include "bpf_rlimit.h"
+#include "cgroup_helpers.h"
+#include "nrm.h"
+#include "bpf_util.h"
+#include "bpf/bpf.h"
+#include "bpf/libbpf.h"
+
+bool outFlag = true;
+int minRate = 1000;		/* cgroup rate limit in Mbps */
+int rate = 1000;		/* can grow if rate conserving is enabled */
+int dur = 1;
+bool stats_flag;
+bool loopback_flag;
+bool debugFlag;
+bool work_conserving_flag;
+
+static void Usage(void);
+static void read_trace_pipe2(void);
+static void do_error(char *msg, bool errno_flag);
+
+#define DEBUGFS "/sys/kernel/debug/tracing/"
+
+struct bpf_object *obj;
+int bpfprog_fd;
+int cgroup_storage_fd;
+
+static void read_trace_pipe2(void)
+{
+	int trace_fd;
+	FILE *outf;
+	char *outFname = "nrm_out.log";
+
+	trace_fd = open(DEBUGFS "trace_pipe", O_RDONLY, 0);
+	if (trace_fd < 0) {
+		printf("Error opening trace_pipe\n");
+		return;
+	}
+
+	if (!outFlag)
+		outFname = "nrm_in.log";
+	outf = fopen(outFname, "w");
+
+	if (outf == NULL)
+		printf("Error creating %s\n", outFname);
+
+	while (1) {
+		static char buf[4097];
+		ssize_t sz;
+
+		sz = read(trace_fd, buf, sizeof(buf) - 1);
+		if (sz > 0) {
+			buf[sz] = 0;
+			puts(buf);
+			if (outf != NULL) {
+				fprintf(outf, "%s\n", buf);
+				fflush(outf);
+			}
+		}
+	}
+}
+
+static void do_error(char *msg, bool errno_flag)
+{
+	if (errno_flag)
+		printf("ERROR: %s, errno: %d\n", msg, errno);
+	else
+		printf("ERROR: %s\n", msg);
+	exit(1);
+}
+
+static int prog_load(char *prog)
+{
+	struct bpf_prog_load_attr prog_load_attr = {
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+		.file = prog,
+		.expected_attach_type = BPF_CGROUP_INET_EGRESS,
+	};
+	int map_fd;
+	struct bpf_map *map;
+
+	int ret = 0;
+
+	if (access(prog, O_RDONLY) < 0) {
+		printf("Error accessing file %s: %s\n", prog, strerror(errno));
+		return 1;
+	}
+	if (bpf_prog_load_xattr(&prog_load_attr, &obj, &bpfprog_fd))
+		ret = 1;
+	if (!ret) {
+		map = bpf_object__find_map_by_name(obj, "queue_stats");
+		map_fd = bpf_map__fd(map);
+		if (map_fd < 0) {
+			printf("Map not found: %s\n", strerror(map_fd));
+			ret = 1;
+		}
+	}
+
+	if (ret) {
+		printf("ERROR: load_bpf_file failed for: %s\n", prog);
+		printf("  Output from verifier:\n%s\n------\n", bpf_log_buf);
+		ret = -1;
+	} else {
+		ret = map_fd;
+	}
+
+	return ret;
+}
+
+static int run_bpf_prog(char *prog, int cg_id)
+{
+	int map_fd;
+	int rc = 0;
+	int key = 0;
+	int cg1 = 0;
+	int type = BPF_CGROUP_INET_EGRESS;
+	char cg_dir[100];
+	struct nrm_queue_stats qstats = {0};
+
+	sprintf(cg_dir, "/nrm%d", cg_id);
+	map_fd = prog_load(prog);
+	if (map_fd  == -1)
+		return 1;
+
+	if (setup_cgroup_environment()) {
+		printf("ERROR: setting cgroup environment\n");
+		goto err;
+	}
+	cg1 = create_and_get_cgroup(cg_dir);
+	if (!cg1) {
+		printf("ERROR: create_and_get_cgroup\n");
+		goto err;
+	}
+	if (join_cgroup(cg_dir)) {
+		printf("ERROR: join_cgroup\n");
+		goto err;
+	}
+
+	qstats.rate = rate;
+	qstats.stats = stats_flag ? 1 : 0;
+	qstats.loopback = loopback_flag ? 1 : 0;
+	if (bpf_map_update_elem(map_fd, &key, &qstats, BPF_ANY)) {
+		printf("ERROR: Could not update map element\n");
+		goto err;
+	}
+
+	if (!outFlag)
+		type = BPF_CGROUP_INET_INGRESS;
+	if (bpf_prog_attach(bpfprog_fd, cg1, type, 0)) {
+		printf("ERROR: bpf_prog_attach fails!\n");
+		log_err("Attaching prog");
+		goto err;
+	}
+
+	if (work_conserving_flag) {
+		struct timeval t0, t_last, t_new;
+		FILE *fin;
+		unsigned long long last_eth_tx_bytes, new_eth_tx_bytes;
+		signed long long last_cg_tx_bytes, new_cg_tx_bytes;
+		signed long long delta_time, delta_bytes, delta_rate;
+		int delta_ms;
+#define DELTA_RATE_CHECK 10000		/* in us */
+#define RATE_THRESHOLD 9500000000	/* 9.5 Gbps */
+
+		bpf_map_lookup_elem(map_fd, &key, &qstats);
+		if (gettimeofday(&t0, NULL) < 0)
+			do_error("gettimeofday failed", true);
+		t_last = t0;
+		fin = fopen("/sys/class/net/eth0/statistics/tx_bytes", "r");
+		if (fscanf(fin, "%llu", &last_eth_tx_bytes) != 1)
+			do_error("fscanf fails", false);
+		fclose(fin);
+		last_cg_tx_bytes = qstats.bytes_total;
+		while (true) {
+			usleep(DELTA_RATE_CHECK);
+			if (gettimeofday(&t_new, NULL) < 0)
+				do_error("gettimeofday failed", true);
+			delta_ms = (t_new.tv_sec - t0.tv_sec) * 1000 +
+				(t_new.tv_usec - t0.tv_usec)/1000;
+			if (delta_ms > dur * 1000)
+				break;
+			delta_time = (t_new.tv_sec - t_last.tv_sec) * 1000000 +
+				(t_new.tv_usec - t_last.tv_usec);
+			if (delta_time == 0)
+				continue;
+			t_last = t_new;
+			fin = fopen("/sys/class/net/eth0/statistics/tx_bytes",
+				    "r");
+			if (fscanf(fin, "%llu", &new_eth_tx_bytes) != 1)
+				do_error("fscanf fails", false);
+			fclose(fin);
+			printf("  new_eth_tx_bytes:%llu\n",
+			       new_eth_tx_bytes);
+			bpf_map_lookup_elem(map_fd, &key, &qstats);
+			new_cg_tx_bytes = qstats.bytes_total;
+			delta_bytes = new_eth_tx_bytes - last_eth_tx_bytes;
+			last_eth_tx_bytes = new_eth_tx_bytes;
+			delta_rate = (delta_bytes * 8000000) / delta_time;
+			printf("%5d - eth_rate:%.1fGbps cg_rate:%.3fGbps",
+			       delta_ms, delta_rate/1000000000.0,
+			       rate/1000.0);
+			if (delta_rate < RATE_THRESHOLD) {
+				/* can increase cgroup rate limit, but first
+				 * check if we are using the current limit.
+				 * Currently increasing by 6.25%, unknown
+				 * if that is the optimal rate.
+				 */
+				int rate_diff100;
+
+				delta_bytes = new_cg_tx_bytes -
+					last_cg_tx_bytes;
+				last_cg_tx_bytes = new_cg_tx_bytes;
+				delta_rate = (delta_bytes * 8000000) /
+					delta_time;
+				printf(" rate:%.3fGbps",
+				       delta_rate/1000000000.0);
+				rate_diff100 = (((long long)rate)*1000000 -
+						     delta_rate) * 100 /
+					(((long long) rate) * 1000000);
+				printf("  rdiff:%d", rate_diff100);
+				if (rate_diff100  <= 3) {
+					rate += (rate >> 4);
+					if (rate > RATE_THRESHOLD / 1000000)
+						rate = RATE_THRESHOLD / 1000000;
+					qstats.rate = rate;
+					printf(" INC\n");
+				} else {
+					printf("\n");
+				}
+			} else {
+				/* Need to decrease cgroup rate limit.
+				 * Currently decreasing by 12.5%, unknown
+				 * if that is optimal
+				 */
+				printf(" DEC\n");
+				rate -= (rate >> 3);
+				if (rate < minRate)
+					rate = minRate;
+				qstats.rate = rate;
+			}
+			if (bpf_map_update_elem(map_fd, &key, &qstats, BPF_ANY))
+				do_error("update map element fails", false);
+		}
+	} else {
+		sleep(dur);
+	}
+	// Get stats!
+	if (stats_flag && bpf_map_lookup_elem(map_fd, &key, &qstats)) {
+		char fname[100];
+		FILE *fout;
+
+		if (!outFlag)
+			sprintf(fname, "nrm.%d.in", cg_id);
+		else
+			sprintf(fname, "nrm.%d.out", cg_id);
+		fout = fopen(fname, "w");
+		fprintf(fout, "id:%d\n", cg_id);
+		fprintf(fout, "ERROR: Could not lookup queue_stats\n");
+	} else if (stats_flag && qstats.lastPacketTime >
+		   qstats.firstPacketTime) {
+		long long delta_us = (qstats.lastPacketTime -
+				      qstats.firstPacketTime)/1000;
+		unsigned int rate_mbps = ((qstats.bytes_total -
+					   qstats.bytes_dropped) * 8 /
+					  delta_us);
+		double percent_pkts, percent_bytes;
+		char fname[100];
+		FILE *fout;
+
+		if (!outFlag)
+			sprintf(fname, "nrm.%d.in", cg_id);
+		else
+			sprintf(fname, "nrm.%d.out", cg_id);
+		fout = fopen(fname, "w");
+		fprintf(fout, "id:%d\n", cg_id);
+		fprintf(fout, "rate_mbps:%d\n", rate_mbps);
+		fprintf(fout, "duration:%.1f secs\n",
+			(qstats.lastPacketTime - qstats.firstPacketTime) /
+			1000000000.0);
+		fprintf(fout, "packets:%d\n", (int)qstats.pkts_total);
+		fprintf(fout, "bytes_MB:%d\n", (int)(qstats.bytes_total /
+						     1000000));
+		fprintf(fout, "pkts_dropped:%d\n", (int)qstats.pkts_dropped);
+		fprintf(fout, "bytes_dropped_MB:%d\n",
+			(int)(qstats.bytes_dropped /
+						       1000000));
+		// Marked Pkts and Bytes
+		percent_pkts = (qstats.pkts_marked * 100.0) /
+			(qstats.pkts_total + 1);
+		percent_bytes = (qstats.bytes_marked * 100.0) /
+			(qstats.bytes_total + 1);
+		fprintf(fout, "pkts_marked_percent:%6.2f\n", percent_pkts);
+		fprintf(fout, "bytes_marked_percent:%6.2f\n", percent_bytes);
+
+		// Dropped Pkts and Bytes
+		percent_pkts = (qstats.pkts_dropped * 100.0) /
+			(qstats.pkts_total + 1);
+		percent_bytes = (qstats.bytes_dropped * 100.0) /
+			(qstats.bytes_total + 1);
+		fprintf(fout, "pkts_dropped_percent:%6.2f\n", percent_pkts);
+		fprintf(fout, "bytes_dropped_percent:%6.2f\n", percent_bytes);
+		fclose(fout);
+	}
+
+	if (debugFlag)
+		read_trace_pipe2();
+	return rc;
+err:
+	rc = 1;
+
+	if (cg1)
+		close(cg1);
+	cleanup_cgroup_environment();
+
+	return rc;
+}
+
+static void Usage(void)
+{
+	printf("This program loads a cgroup skb BPF program to enforce\n"
+	       "cgroup output (egress) bandwidth limits.\n\n"
+	       "USAGE: nrm [-o] [-d]  [-l] [-n <id>] [-r <rate>] [-s]\n"
+	       "           [-t <secs>] [-w] [-h] [prog]\n"
+	       "  Where:\n"
+	       "    -o         indicates egress direction (default)\n"
+	       "    -d         print BPF trace debug buffer\n"
+	       "    -l         also limit flows using loopback\n"
+	       "    -n <#>     to create cgroup \"/nrm#\" and attach prog\n"
+	       "               Default is /nrm1\n"
+	       "    -r <rate>  Rate in Mbps\n"
+	       "    -s         Update NRM stats\n"
+	       "    -t <time>  Exit after specified seconds (deault is 0)\n"
+	       "    -w	       Work conserving flag. cgroup can increase\n"
+	       "               bandwidth beyond the rate limit specified\n"
+	       "               while there is available bandwidth. Current\n"
+	       "               implementation assumes there is only eth0\n"
+	       "               but can be extended to support multiple NICs\n"
+	       "    -h         print this info\n"
+	       "    prog       BPF program file name. Name defaults to\n"
+	       "                 nrm_out_kern.o for output, and\n"
+	       "                 nrm_in_ker.o for input.\n");
+}
+
+int main(int argc, char **argv)
+{
+	char *prog = "nrm_out_kern.o";
+	int  k;
+	int cg_id = 1;
+	char *optstring = "iodln:r:st:wh";
+
+	while ((k = getopt(argc, argv, optstring)) != -1) {
+		switch (k) {
+		case'o':
+			break;
+		case 'd':
+			debugFlag = true;
+			break;
+		case 'l':
+			loopback_flag = true;
+			break;
+		case 'n':
+			cg_id = atoi(optarg);
+			break;
+		case 'r':
+			minRate = atoi(optarg) * 1.024;
+			rate = minRate;
+			break;
+		case 's':
+			stats_flag = true;
+			break;
+		case 't':
+			dur = atoi(optarg);
+			break;
+		case 'w':
+			work_conserving_flag = true;
+			break;
+		case '?':
+			if (optopt == 'n' || optopt == 'r' || optopt == 't')
+				fprintf(stderr,
+					"Option -%c requires an argument.\n\n",
+					optopt);
+		case 'h':
+			// fallthrough
+		default:
+			Usage();
+			return 0;
+		}
+	}
+
+	if (optind < argc)
+		prog = argv[optind];
+	printf("NRM prog: %s\n", prog != NULL ? prog : "NULL");
+
+	return run_bpf_prog(prog, cg_id);
+}
-- 
2.17.1

Powered by blists - more mailing lists