| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1551224265-9304-3-git-send-email-Tristram.Ha@microchip.com>
Date: Tue, 26 Feb 2019 15:37:44 -0800
From: <Tristram.Ha@...rochip.com>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Pavel Machek <pavel@....cz>
CC: Tristram Ha <Tristram.Ha@...rochip.com>,
<UNGLinuxDriver@...rochip.com>, <netdev@...r.kernel.org>
Subject: [PATCH net-next 2/3] net: dsa: microchip: add KSZ9893 switch support
From: Tristram Ha <Tristram.Ha@...rochip.com>
Add KSZ9893 switch support in KSZ9477 driver. This switch is similar to
KSZ9477 except the ingress tail tag has 1 byte instead of 2 bytes. The
XMII register that governs how the host port communicates with the MAC
also has different register definitions.
Signed-off-by: Tristram Ha <Tristram.Ha@...rochip.com>
---
drivers/net/dsa/microchip/ksz9477.c | 244 ++++++++++++++++++++++++++++++--
drivers/net/dsa/microchip/ksz9477_spi.c | 4 +-
drivers/net/dsa/microchip/ksz_common.c | 4 +-
include/net/dsa.h | 1 +
net/dsa/dsa.c | 2 +
net/dsa/dsa_priv.h | 1 +
net/dsa/tag_ksz.c | 34 +++++
7 files changed, 274 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 03de50e..3bb548a 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -18,6 +18,11 @@
#include "ksz9477_reg.h"
#include "ksz_common.h"
+/* Used with variable features to indicate capabilities. */
+#define GBIT_SUPPORT BIT(0)
+#define NEW_XMII BIT(1)
+#define IS_9893 BIT(2)
+
static const struct {
int index;
char string[ETH_GSTRING_LEN];
@@ -328,7 +333,12 @@ static void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
int port)
{
- return DSA_TAG_PROTO_KSZ9477;
+ enum dsa_tag_protocol proto = DSA_TAG_PROTO_KSZ9477;
+ struct ksz_device *dev = ds->priv;
+
+ if (dev->features & IS_9893)
+ proto = DSA_TAG_PROTO_KSZ9893;
+ return proto;
}
static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
@@ -353,7 +363,7 @@ static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
val = 0x796d;
break;
case MII_PHYSID1:
- val = 0x0022;
+ val = KSZ9477_ID_HI;
break;
case MII_PHYSID2:
val = 0x1631;
@@ -389,6 +399,10 @@ static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
/* No real PHY after this. */
if (addr >= dev->phy_port_cnt)
return 0;
+
+ /* No gigabit support. Do not write to this register. */
+ if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000)
+ return 0;
ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
return 0;
@@ -998,11 +1012,156 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
static void ksz9477_phy_setup(struct ksz_device *dev, int port,
struct phy_device *phy)
{
- if (port < dev->phy_port_cnt) {
- /* The MAC actually cannot run in 1000 half-duplex mode. */
+ /* Only apply to port with PHY. */
+ if (port >= dev->phy_port_cnt)
+ return;
+
+ /* The MAC actually cannot run in 1000 half-duplex mode. */
+ phy_remove_link_mode(phy,
+ ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+
+ /* PHY does not support gigabit. */
+ if (!(dev->features & GBIT_SUPPORT))
phy_remove_link_mode(phy,
- ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
+}
+
+static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
+{
+ bool gbit;
+
+ if (dev->features & NEW_XMII)
+ gbit = !(data & PORT_MII_NOT_1GBIT);
+ else
+ gbit = !!(data & PORT_MII_1000MBIT_S1);
+ return gbit;
+}
+
+static void ksz9477_set_gbit(struct ksz_device *dev, bool gbit, u8 *data)
+{
+ if (dev->features & NEW_XMII) {
+ if (gbit)
+ *data &= ~PORT_MII_NOT_1GBIT;
+ else
+ *data |= PORT_MII_NOT_1GBIT;
+ } else {
+ if (gbit)
+ *data |= PORT_MII_1000MBIT_S1;
+ else
+ *data &= ~PORT_MII_1000MBIT_S1;
+ }
+}
+
+static int ksz9477_get_xmii(struct ksz_device *dev, u8 data)
+{
+ int mode;
+
+ if (dev->features & NEW_XMII) {
+ switch (data & PORT_MII_SEL_M) {
+ case PORT_MII_SEL:
+ mode = 0;
+ break;
+ case PORT_RMII_SEL:
+ mode = 1;
+ break;
+ case PORT_GMII_SEL:
+ mode = 2;
+ break;
+ default:
+ mode = 3;
+ }
+ } else {
+ switch (data & PORT_MII_SEL_M) {
+ case PORT_MII_SEL_S1:
+ mode = 0;
+ break;
+ case PORT_RMII_SEL_S1:
+ mode = 1;
+ break;
+ case PORT_GMII_SEL_S1:
+ mode = 2;
+ break;
+ default:
+ mode = 3;
+ }
+ }
+ return mode;
+}
+
+static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data)
+{
+ u8 xmii;
+
+ if (dev->features & NEW_XMII) {
+ switch (mode) {
+ case 0:
+ xmii = PORT_MII_SEL;
+ break;
+ case 1:
+ xmii = PORT_RMII_SEL;
+ break;
+ case 2:
+ xmii = PORT_GMII_SEL;
+ break;
+ default:
+ xmii = PORT_RGMII_SEL;
+ break;
+ }
+ } else {
+ switch (mode) {
+ case 0:
+ xmii = PORT_MII_SEL_S1;
+ break;
+ case 1:
+ xmii = PORT_RMII_SEL_S1;
+ break;
+ case 2:
+ xmii = PORT_GMII_SEL_S1;
+ break;
+ default:
+ xmii = PORT_RGMII_SEL_S1;
+ break;
+ }
+ }
+ *data &= ~PORT_MII_SEL_M;
+ *data |= xmii;
+}
+
+static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
+{
+ phy_interface_t interface;
+ bool gbit;
+ int mode;
+ u8 data8;
+
+ if (port < dev->phy_port_cnt)
+ return PHY_INTERFACE_MODE_NA;
+ ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
+ gbit = ksz9477_get_gbit(dev, data8);
+ mode = ksz9477_get_xmii(dev, data8);
+ switch (mode) {
+ case 2:
+ interface = PHY_INTERFACE_MODE_GMII;
+ if (gbit)
+ break;
+ case 0:
+ interface = PHY_INTERFACE_MODE_MII;
+ break;
+ case 1:
+ interface = PHY_INTERFACE_MODE_RMII;
+ break;
+ default:
+ interface = PHY_INTERFACE_MODE_RGMII;
+ if (data8 & PORT_RGMII_ID_EG_ENABLE)
+ interface = PHY_INTERFACE_MODE_RGMII_TXID;
+ if (data8 & PORT_RGMII_ID_IG_ENABLE) {
+ interface = PHY_INTERFACE_MODE_RGMII_RXID;
+ if (data8 & PORT_RGMII_ID_EG_ENABLE)
+ interface = PHY_INTERFACE_MODE_RGMII_ID;
+ }
+ break;
}
+ return interface;
}
static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
@@ -1051,24 +1210,25 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* configure MAC to 1G & RGMII mode */
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
- data8 &= ~PORT_MII_NOT_1GBIT;
- data8 &= ~PORT_MII_SEL_M;
switch (dev->interface) {
case PHY_INTERFACE_MODE_MII:
- data8 |= PORT_MII_NOT_1GBIT;
- data8 |= PORT_MII_SEL;
+ ksz9477_set_xmii(dev, 0, &data8);
+ ksz9477_set_gbit(dev, false, &data8);
p->phydev.speed = SPEED_100;
break;
case PHY_INTERFACE_MODE_RMII:
- data8 |= PORT_MII_NOT_1GBIT;
- data8 |= PORT_RMII_SEL;
+ ksz9477_set_xmii(dev, 1, &data8);
+ ksz9477_set_gbit(dev, false, &data8);
p->phydev.speed = SPEED_100;
break;
case PHY_INTERFACE_MODE_GMII:
- data8 |= PORT_GMII_SEL;
+ ksz9477_set_xmii(dev, 2, &data8);
+ ksz9477_set_gbit(dev, true, &data8);
p->phydev.speed = SPEED_1000;
break;
default:
+ ksz9477_set_xmii(dev, 3, &data8);
+ ksz9477_set_gbit(dev, true, &data8);
data8 &= ~PORT_RGMII_ID_IG_ENABLE;
data8 &= ~PORT_RGMII_ID_EG_ENABLE;
if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
@@ -1077,7 +1237,6 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_EG_ENABLE;
- data8 |= PORT_RGMII_SEL;
p->phydev.speed = SPEED_1000;
break;
}
@@ -1115,10 +1274,25 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
for (i = 0; i < dev->port_cnt; i++) {
if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+ phy_interface_t interface;
+
dev->cpu_port = i;
dev->host_mask = (1 << dev->cpu_port);
dev->port_mask |= dev->host_mask;
+ /* Read from XMII register to determine host port
+ * interface. If set specifically in device tree
+ * note the difference to help debugging.
+ */
+ interface = ksz9477_get_interface(dev, i);
+ if (!dev->interface)
+ dev->interface = interface;
+ if (interface && interface != dev->interface)
+ dev_info(dev->dev,
+ "use %s instead of %s\n",
+ phy_modes(dev->interface),
+ phy_modes(interface));
+
/* enable cpu port */
ksz9477_port_setup(dev, i, true);
p = &dev->ports[dev->cpu_port];
@@ -1172,6 +1346,9 @@ static int ksz9477_setup(struct dsa_switch *ds)
ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
true);
+ /* Do not work correctly with tail tagging. */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
+
/* accept packet up to 2000bytes */
ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
@@ -1230,6 +1407,8 @@ static u32 ksz9477_get_port_addr(int port, int offset)
static int ksz9477_switch_detect(struct ksz_device *dev)
{
u8 data8;
+ u8 id_hi;
+ u8 id_lo;
u32 id32;
int ret;
@@ -1247,11 +1426,40 @@ static int ksz9477_switch_detect(struct ksz_device *dev)
ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
if (ret)
return ret;
+ ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8);
+ if (ret)
+ return ret;
/* Number of ports can be reduced depending on chip. */
dev->mib_port_cnt = TOTAL_PORT_NUM;
dev->phy_port_cnt = 5;
+ /* Default capability is gigabit capable. */
+ dev->features = GBIT_SUPPORT;
+
+ id_hi = (u8)(id32 >> 16);
+ id_lo = (u8)(id32 >> 8);
+ if ((id_lo & 0xf) == 3) {
+ /* Chip is from KSZ9893 design. */
+ dev->features |= IS_9893;
+
+ /* Chip does not support gigabit. */
+ if (data8 & SW_QW_ABLE)
+ dev->features &= ~GBIT_SUPPORT;
+ dev->mib_port_cnt = 3;
+ dev->phy_port_cnt = 2;
+ } else {
+ /* Chip uses new XMII register definitions. */
+ dev->features |= NEW_XMII;
+
+ /* Chip does not support gigabit. */
+ if (!(data8 & SW_GIGABIT_ABLE))
+ dev->features &= ~GBIT_SUPPORT;
+ }
+
+ /* Change chip id to known ones so it can be matched against them. */
+ id32 = (id_hi << 16) | (id_lo << 8);
+
dev->chip_id = id32;
return 0;
@@ -1286,6 +1494,15 @@ struct ksz_chip_data {
.cpu_ports = 0x7F, /* can be configured as cpu port */
.port_cnt = 7, /* total physical port count */
},
+ {
+ .chip_id = 0x00989300,
+ .dev_name = "KSZ9893",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x07, /* can be configured as cpu port */
+ .port_cnt = 3, /* total port count */
+ },
};
static int ksz9477_switch_init(struct ksz_device *dev)
@@ -1333,7 +1550,6 @@ static int ksz9477_switch_init(struct ksz_device *dev)
if (!dev->ports[i].mib.counters)
return -ENOMEM;
}
- dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
return 0;
}
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index d757ba1..7517862 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -2,7 +2,7 @@
/*
* Microchip KSZ9477 series register access through SPI
*
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
*/
#include <asm/unaligned.h>
@@ -155,6 +155,8 @@ static void ksz9477_spi_shutdown(struct spi_device *spi)
static const struct of_device_id ksz9477_dt_ids[] = {
{ .compatible = "microchip,ksz9477" },
{ .compatible = "microchip,ksz9897" },
+ { .compatible = "microchip,ksz9893" },
+ { .compatible = "microchip,ksz9563" },
{},
};
MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 9328b88..39dace8 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -453,7 +453,9 @@ int ksz_switch_register(struct ksz_device *dev,
if (ret)
return ret;
- dev->interface = PHY_INTERFACE_MODE_MII;
+ /* Host port interface will be self detected, or specifically set in
+ * device tree.
+ */
if (dev->dev->of_node) {
ret = of_get_phy_mode(dev->dev->of_node);
if (ret >= 0)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index e8ac5b3..ae480bb 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -38,6 +38,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_EDSA,
DSA_TAG_PROTO_GSWIP,
DSA_TAG_PROTO_KSZ9477,
+ DSA_TAG_PROTO_KSZ9893,
DSA_TAG_PROTO_LAN9303,
DSA_TAG_PROTO_MTK,
DSA_TAG_PROTO_QCA,
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index aee909b..36de4f2 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -57,6 +57,7 @@ static struct sk_buff *dsa_slave_notag_xmit(struct sk_buff *skb,
#endif
#ifdef CONFIG_NET_DSA_TAG_KSZ9477
[DSA_TAG_PROTO_KSZ9477] = &ksz9477_netdev_ops,
+ [DSA_TAG_PROTO_KSZ9893] = &ksz9893_netdev_ops,
#endif
#ifdef CONFIG_NET_DSA_TAG_LAN9303
[DSA_TAG_PROTO_LAN9303] = &lan9303_netdev_ops,
@@ -93,6 +94,7 @@ const char *dsa_tag_protocol_to_str(const struct dsa_device_ops *ops)
#endif
#ifdef CONFIG_NET_DSA_TAG_KSZ9477
[DSA_TAG_PROTO_KSZ9477] = "ksz9477",
+ [DSA_TAG_PROTO_KSZ9893] = "ksz9893",
#endif
#ifdef CONFIG_NET_DSA_TAG_LAN9303
[DSA_TAG_PROTO_LAN9303] = "lan9303",
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index c6caa58..093b7d1 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -216,6 +216,7 @@ static inline struct dsa_port *dsa_slave_to_port(const struct net_device *dev)
/* tag_ksz.c */
extern const struct dsa_device_ops ksz9477_netdev_ops;
+extern const struct dsa_device_ops ksz9893_netdev_ops;
/* tag_lan9303.c */
extern const struct dsa_device_ops lan9303_netdev_ops;
diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c
index 927e9c8..de246c9 100644
--- a/net/dsa/tag_ksz.c
+++ b/net/dsa/tag_ksz.c
@@ -16,6 +16,7 @@
/* Typically only one byte is used for tail tag. */
#define KSZ_EGRESS_TAG_LEN 1
+#define KSZ_INGRESS_TAG_LEN 1
static struct sk_buff *ksz_common_xmit(struct sk_buff *skb,
struct net_device *dev, int len)
@@ -141,3 +142,36 @@ static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev,
.rcv = ksz9477_rcv,
.overhead = KSZ9477_INGRESS_TAG_LEN,
};
+
+#define KSZ9893_TAIL_TAG_OVERRIDE BIT(5)
+#define KSZ9893_TAIL_TAG_LOOKUP BIT(6)
+
+static struct sk_buff *ksz9893_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct dsa_port *dp = dsa_slave_to_port(dev);
+ struct sk_buff *nskb;
+ u8 *addr;
+ u8 *tag;
+
+ nskb = ksz_common_xmit(skb, dev, KSZ_INGRESS_TAG_LEN);
+ if (!nskb)
+ return NULL;
+
+ /* Tag encoding */
+ tag = skb_put(nskb, KSZ_INGRESS_TAG_LEN);
+ addr = skb_mac_header(nskb);
+
+ *tag = BIT(dp->index);
+
+ if (is_link_local_ether_addr(addr))
+ *tag |= KSZ9893_TAIL_TAG_OVERRIDE;
+
+ return nskb;
+}
+
+const struct dsa_device_ops ksz9893_netdev_ops = {
+ .xmit = ksz9893_xmit,
+ .rcv = ksz9477_rcv,
+ .overhead = KSZ_INGRESS_TAG_LEN,
+};
--
1.9.1
Powered by blists - more mailing lists