[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190304.113025.1437399524067140375.davem@davemloft.net>
Date: Mon, 04 Mar 2019 11:30:25 -0800 (PST)
From: David Miller <davem@...emloft.net>
To: hkallweit1@...il.com
Cc: andrew@...n.ch, f.fainelli@...il.com, heiko@...ech.de,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH net-next] net: phy: improve handling link_change_notify
callback
From: Heiner Kallweit <hkallweit1@...il.com>
Date: Sun, 3 Mar 2019 19:58:57 +0100
> Currently the Phy driver's link_change_notify callback is called
> whenever the state machine is run (every second if polling), no matter
> whether the state changed or not. This isn't needed and may confuse
> users considering the name of the callback. Therefore let's change
> the behavior and call this callback only in case of an actual
> state change.
>
> This requires changes to the at803x and rockchip drivers.
> at803x can be simplified so that it reacts on a state change to
> PHY_NOLINK only.
> The rockchip driver can also be much simplified. We simply re-init
> the AFE/DSP registers whenever we change to PHY_RUNNING and speed
> is 100Mbps. This causes very small overhead because we do this even
> if the speed was 100Mbps already. But this is neglectable and
> I think justified by the much simpler code.
>
> Changes are compile-tested only.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
Someone please review this.
Powered by blists - more mailing lists