lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <3e992267-2d2e-2efd-61da-792759252b5a@ti.com>
Date:   Tue, 12 Mar 2019 13:08:02 -0500
From:   Dan Murphy <dmurphy@...com>
To:     Wolfgang Grandegger <wg@...ndegger.com>, <mkl@...gutronix.de>,
        <davem@...emloft.net>
CC:     <linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v8 1/4] can: m_can: Create a m_can platform framework

Wolfgang

On 3/12/19 9:42 AM, Wolfgang Grandegger wrote:
> Hello Dan,
> 
> in the previous email you said that the tcan4x5x uses:
> 
>   Bosch M-CAN Revision 3.2.1.1
> 
> This means "cdev->version == 32", hence it's using FIFOs...
> 
> Am 12.03.19 um 13:12 schrieb Dan Murphy:
>> Create a m_can platform framework that peripherial
>> devices can register to and use common code and register sets.
>> The peripherial devices may provide read/write and configuration
>> support of the IP.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>>
>> v8 - Added a clean function for the tx_skb, cleaned up skb on BUS_OFF and on xmit
>> BUSY - https://lore.kernel.org/patchwork/patch/1047980/
>>
>> v7 - Fixed remaining new checkpatch issues, removed CSR setting, fixed tx hard
>> start function to return tx_busy, and renamed device callbacks - https://lore.kernel.org/patchwork/patch/1047220/
>> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style
>> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed
>> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -
>> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/
>> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/
>>
>>  drivers/net/can/m_can/Kconfig          |  13 +-
>>  drivers/net/can/m_can/Makefile         |   1 +
>>  drivers/net/can/m_can/m_can.c          | 717 +++++++++++++------------
>>  drivers/net/can/m_can/m_can.h          | 110 ++++
>>  drivers/net/can/m_can/m_can_platform.c | 202 +++++++
>>  5 files changed, 699 insertions(+), 344 deletions(-)
>>  create mode 100644 drivers/net/can/m_can/m_can.h
>>  create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>
>> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
>> index 04f20dd39007..f7119fd72df4 100644
>> --- a/drivers/net/can/m_can/Kconfig
>> +++ b/drivers/net/can/m_can/Kconfig
>> @@ -1,5 +1,14 @@
>>  config CAN_M_CAN
>> +	tristate "Bosch M_CAN support"
>> +	---help---
>> +	  Say Y here if you want support for Bosch M_CAN controller framework.
>> +	  This is common support for devices that embed the Bosch M_CAN IP.
>> +
>> +config CAN_M_CAN_PLATFORM
>> +	tristate "Bosch M_CAN support for io-mapped devices"
>>  	depends on HAS_IOMEM
>> -	tristate "Bosch M_CAN devices"
>> +	depends on CAN_M_CAN
>>  	---help---
>> -	  Say Y here if you want to support for Bosch M_CAN controller.
>> +	  Say Y here if you want support for IO Mapped Bosch M_CAN controller.
>> +	  This support is for devices that have the Bosch M_CAN controller
>> +	  IP embedded into the device and the IP is IO Mapped to the processor.
>> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
>> index 8bbd7f24f5be..057bbcdb3c74 100644
>> --- a/drivers/net/can/m_can/Makefile
>> +++ b/drivers/net/can/m_can/Makefile
>> @@ -3,3 +3,4 @@
>>  #
>>  
>>  obj-$(CONFIG_CAN_M_CAN) += m_can.o
>> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o
>> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
>> index 9b449400376b..f2231fb02525 100644
>> --- a/drivers/net/can/m_can/m_can.c
>> +++ b/drivers/net/can/m_can/m_can.c
>> @@ -1,20 +1,14 @@
>> -/*
>> - * CAN bus driver for Bosch M_CAN controller
>> - *
>> - * Copyright (C) 2014 Freescale Semiconductor, Inc.
>> - *	Dong Aisheng <b29396@...escale.com>
>> - *
>> - * Bosch M_CAN user manual can be obtained from:
>> +// SPDX-License-Identifier: GPL-2.0
>> +// CAN bus driver for Bosch M_CAN controller
>> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
>> +//      Dong Aisheng <b29396@...escale.com>
>> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +/* Bosch M_CAN user manual can be obtained from:
>>   * http://www.bosch-semiconductors.de/media/pdf_1/ipmodules_1/m_can/
>>   * mcan_users_manual_v302.pdf
>> - *
>> - * This file is licensed under the terms of the GNU General Public
>> - * License version 2. This program is licensed "as is" without any
>> - * warranty of any kind, whether express or implied.
>>   */
>>  
>> -#include <linux/clk.h>
>> -#include <linux/delay.h>
>>  #include <linux/interrupt.h>
>>  #include <linux/io.h>
>>  #include <linux/kernel.h>
>> @@ -28,11 +22,7 @@
>>  #include <linux/can/dev.h>
>>  #include <linux/pinctrl/consumer.h>
>>  
>> -/* napi related */
>> -#define M_CAN_NAPI_WEIGHT	64
>> -
>> -/* message ram configuration data length */
>> -#define MRAM_CFG_LEN	8
>> +#include "m_can.h"
>>  
>>  /* registers definition */
>>  enum m_can_reg {
>> @@ -86,28 +76,11 @@ enum m_can_reg {
>>  	M_CAN_TXEFA	= 0xf8,
>>  };
>>  
>> -/* m_can lec values */
>> -enum m_can_lec_type {
>> -	LEC_NO_ERROR = 0,
>> -	LEC_STUFF_ERROR,
>> -	LEC_FORM_ERROR,
>> -	LEC_ACK_ERROR,
>> -	LEC_BIT1_ERROR,
>> -	LEC_BIT0_ERROR,
>> -	LEC_CRC_ERROR,
>> -	LEC_UNUSED,
>> -};
>> +/* napi related */
>> +#define M_CAN_NAPI_WEIGHT	64
>>  
>> -enum m_can_mram_cfg {
>> -	MRAM_SIDF = 0,
>> -	MRAM_XIDF,
>> -	MRAM_RXF0,
>> -	MRAM_RXF1,
>> -	MRAM_RXB,
>> -	MRAM_TXE,
>> -	MRAM_TXB,
>> -	MRAM_CFG_NUM,
>> -};
>> +/* message ram configuration data length */
>> +#define MRAM_CFG_LEN	8
>>  
>>  /* Core Release Register (CREL) */
>>  #define CREL_REL_SHIFT		28
>> @@ -347,68 +320,72 @@ enum m_can_mram_cfg {
>>  #define TX_EVENT_MM_SHIFT	TX_BUF_MM_SHIFT
>>  #define TX_EVENT_MM_MASK	(0xff << TX_EVENT_MM_SHIFT)
>>  
>> -/* address offset and element number for each FIFO/Buffer in the Message RAM */
>> -struct mram_cfg {
>> -	u16 off;
>> -	u8  num;
>> -};
>> -
>> -/* m_can private data structure */
>> -struct m_can_priv {
>> -	struct can_priv can;	/* must be the first member */
>> -	struct napi_struct napi;
>> -	struct net_device *dev;
>> -	struct device *device;
>> -	struct clk *hclk;
>> -	struct clk *cclk;
>> -	void __iomem *base;
>> -	u32 irqstatus;
>> -	int version;
>> -
>> -	/* message ram configuration */
>> -	void __iomem *mram_base;
>> -	struct mram_cfg mcfg[MRAM_CFG_NUM];
>> -};
>> +static u32 m_can_read(struct m_can_priv *priv, enum m_can_reg reg)
>> +{
>> +	if (priv->ops->read_reg)
>> +		return priv->ops->read_reg(priv, reg);
>> +	else
>> +		return -EINVAL;
>> +}
>>  
>> -static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)
>> +static int m_can_write(struct m_can_priv *priv, enum m_can_reg reg, u32 val)
>>  {
>> -	return readl(priv->base + reg);
>> +	if (priv->ops->write_reg)
>> +		return priv->ops->write_reg(priv, reg, val);
>> +	else
>> +		return -EINVAL;
>>  }
>>  
>> -static inline void m_can_write(const struct m_can_priv *priv,
>> -			       enum m_can_reg reg, u32 val)
>> +static u32 m_can_fifo_read(struct m_can_priv *priv,
>> +			   u32 fgi, unsigned int offset)
>>  {
>> -	writel(val, priv->base + reg);
>> +	u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE +
>> +			  offset;
>> +
>> +	if (priv->ops->read_fifo)
>> +		return priv->ops->read_fifo(priv, addr_offset);
>> +	else
>> +		return -EINVAL;
>>  }
>>  
>> -static inline u32 m_can_fifo_read(const struct m_can_priv *priv,
>> -				  u32 fgi, unsigned int offset)
>> +static u32 m_can_fifo_write(struct m_can_priv *priv,
>> +			    u32 fpi, unsigned int offset, u32 val)
>>  {
>> -	return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +
>> -		     fgi * RXF0_ELEMENT_SIZE + offset);
>> +	u32 addr_offset = priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE +
>> +			  offset;
>> +
>> +	if (priv->ops->write_fifo)
>> +		return priv->ops->write_fifo(priv, addr_offset, val);
>> +	else
>> +		return -EINVAL;
>>  }
>>  
>> -static inline void m_can_fifo_write(const struct m_can_priv *priv,
>> -				    u32 fpi, unsigned int offset, u32 val)
>> +static u32 m_can_fifo_write_no_off(struct m_can_priv *priv,
>> +				   u32 fpi, u32 val)
>>  {
>> -	writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +
>> -	       fpi * TXB_ELEMENT_SIZE + offset);
>> +	if (priv->ops->write_fifo)
>> +		return priv->ops->write_fifo(priv, fpi, val);
>> +	else
>> +		return 0;
>>  }
>>  
>> -static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
>> -				      u32 fgi,
>> -				      u32 offset) {
>> -	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
>> -			fgi * TXE_ELEMENT_SIZE + offset);
>> +static u32 m_can_txe_fifo_read(struct m_can_priv *priv, u32 fgi, u32 offset)
>> +{
>> +	u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE +
>> +			  offset;
>> +
>> +	if (priv->ops->read_fifo)
>> +		return priv->ops->read_fifo(priv, addr_offset);
>> +	else
>> +		return -EINVAL;
>>  }
>>  
>> -static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
>> +static inline bool m_can_tx_fifo_full(struct m_can_priv *priv)
>>  {
>>  		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
>>  }
>>  
>> -static inline void m_can_config_endisable(const struct m_can_priv *priv,
>> -					  bool enable)
>> +void m_can_config_endisable(struct m_can_priv *priv, bool enable)
>>  {
>>  	u32 cccr = m_can_read(priv, M_CAN_CCCR);
>>  	u32 timeout = 10;
>> @@ -430,7 +407,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
>>  
>>  	while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {
>>  		if (timeout == 0) {
>> -			netdev_warn(priv->dev, "Failed to init module\n");
>> +			netdev_warn(priv->net, "Failed to init module\n");
>>  			return;
>>  		}
>>  		timeout--;
>> @@ -438,17 +415,29 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
>>  	}
>>  }
>>  
>> -static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)
>> +static inline void m_can_enable_all_interrupts(struct m_can_priv *priv)
>>  {
>>  	/* Only interrupt line 0 is used in this driver */
>>  	m_can_write(priv, M_CAN_ILE, ILE_EINT0);
>>  }
>>  
>> -static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
>> +static inline void m_can_disable_all_interrupts(struct m_can_priv *priv)
>>  {
>>  	m_can_write(priv, M_CAN_ILE, 0x0);
>>  }
>>  
>> +static void m_can_clean(struct net_device *net)
>> +{
>> +	struct m_can_priv *priv = netdev_priv(net);
>> +
>> +	if (priv->tx_skb) {
>> +		net->stats.tx_errors++;
>> +		dev_kfree_skb(priv->tx_skb);
>> +		can_free_echo_skb(priv->net, 0);
> 
> I think this frees the skb twice!
> 

It appears so.  I will fix it up.

> Also, the index depends on "cdev->version"! If > 30, the last used index
> should be selected.
> 

OK I will need to look into that.

>> +		priv->tx_skb = NULL;
>> +	}
>> +}
>> +
>>  static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
>>  {
>>  	struct net_device_stats *stats = &dev->stats;
>> @@ -633,9 +622,12 @@ static int m_can_clk_start(struct m_can_priv *priv)
>>  {
>>  	int err;
>>  
>> -	err = pm_runtime_get_sync(priv->device);
>> +	if (priv->pm_clock_support == 0)
>> +		return 0;
>> +
>> +	err = pm_runtime_get_sync(priv->dev);
>>  	if (err < 0) {
>> -		pm_runtime_put_noidle(priv->device);
>> +		pm_runtime_put_noidle(priv->dev);
>>  		return err;
>>  	}
>>  
>> @@ -644,7 +636,8 @@ static int m_can_clk_start(struct m_can_priv *priv)
>>  
>>  static void m_can_clk_stop(struct m_can_priv *priv)
>>  {
>> -	pm_runtime_put_sync(priv->device);
>> +	if (priv->pm_clock_support)
>> +		pm_runtime_put_sync(priv->dev);
>>  }
>>  
>>  static int m_can_get_berr_counter(const struct net_device *dev,
>> @@ -811,9 +804,8 @@ static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
>>  	return work_done;
>>  }
>>  
>> -static int m_can_poll(struct napi_struct *napi, int quota)
>> +static int m_can_rx_handler(struct net_device *dev, int quota)
>>  {
>> -	struct net_device *dev = napi->dev;
>>  	struct m_can_priv *priv = netdev_priv(dev);
>>  	int work_done = 0;
>>  	u32 irqstatus, psr;
>> @@ -831,13 +823,33 @@ static int m_can_poll(struct napi_struct *napi, int quota)
>>  
>>  	if (irqstatus & IR_RF0N)
>>  		work_done += m_can_do_rx_poll(dev, (quota - work_done));
>> +end:
>> +	return work_done;
>> +}
>> +
>> +static int m_can_rx_peripherial(struct net_device *dev)
>> +{
>> +	struct m_can_priv *priv = netdev_priv(dev);
>> +
>> +	m_can_rx_handler(dev, 1);
>> +
>> +	m_can_enable_all_interrupts(priv);
>>  
>> +	return 0;
>> +}
>> +
>> +static int m_can_poll(struct napi_struct *napi, int quota)
>> +{
>> +	struct net_device *dev = napi->dev;
>> +	struct m_can_priv *priv = netdev_priv(dev);
>> +	int work_done;
>> +
>> +	work_done = m_can_rx_handler(dev, quota);
>>  	if (work_done < quota) {
>>  		napi_complete_done(napi, work_done);
>>  		m_can_enable_all_interrupts(priv);
>>  	}
>>  
>> -end:
>>  	return work_done;
>>  }
>>  
>> @@ -894,6 +906,9 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)
>>  	if (ir & IR_ALL_INT)
>>  		m_can_write(priv, M_CAN_IR, ir);
>>  
>> +	if (priv->ops->clear_interrupts)
>> +		priv->ops->clear_interrupts(priv);
>> +
>>  	/* schedule NAPI in case of
>>  	 * - rx IRQ
>>  	 * - state change IRQ
>> @@ -902,7 +917,10 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)
>>  	if ((ir & IR_RF0N) || (ir & IR_ERR_ALL_30X)) {
>>  		priv->irqstatus = ir;
>>  		m_can_disable_all_interrupts(priv);
>> -		napi_schedule(&priv->napi);
>> +		if (!priv->is_peripherial)
>> +			napi_schedule(&priv->napi);
>> +		else
>> +			m_can_rx_peripherial(dev);
>>  	}
>>  
>>  	if (priv->version == 30) {
>> @@ -1155,6 +1173,9 @@ static void m_can_chip_config(struct net_device *dev)
>>  	m_can_set_bittiming(dev);
>>  
>>  	m_can_config_endisable(priv, false);
>> +
>> +	if (priv->ops->init)
>> +		priv->ops->init(priv);
>>  }
>>  
>>  static void m_can_start(struct net_device *dev)
>> @@ -1173,6 +1194,7 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
>>  {
>>  	switch (mode) {
>>  	case CAN_MODE_START:
>> +		m_can_clean(dev);
>>  		m_can_start(dev);
>>  		netif_wake_queue(dev);
>>  		break;
>> @@ -1188,20 +1210,17 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
>>   * else it returns the release and step coded as:
>>   * return value = 10 * <release> + 1 * <step>
>>   */
>> -static int m_can_check_core_release(void __iomem *m_can_base)
>> +static int m_can_check_core_release(struct m_can_priv *priv)
>>  {
>>  	u32 crel_reg;
>>  	u8 rel;
>>  	u8 step;
>>  	int res;
>> -	struct m_can_priv temp_priv = {
>> -		.base = m_can_base
>> -	};
>>  
>>  	/* Read Core Release Version and split into version number
>>  	 * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;
>>  	 */
>> -	crel_reg = m_can_read(&temp_priv, M_CAN_CREL);
>> +	crel_reg = m_can_read(priv, M_CAN_CREL);
>>  	rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);
>>  	step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);
>>  
>> @@ -1219,18 +1238,26 @@ static int m_can_check_core_release(void __iomem *m_can_base)
>>  /* Selectable Non ISO support only in version 3.2.x
>>   * This function checks if the bit is writable.
>>   */
>> -static bool m_can_niso_supported(const struct m_can_priv *priv)
>> +static bool m_can_niso_supported(struct m_can_priv *priv)
>>  {
>> -	u32 cccr_reg, cccr_poll;
>> -	int niso_timeout;
>> +	u32 cccr_reg, cccr_poll = 0;
>> +	int niso_timeout = -ETIMEDOUT;
>> +	int i;
>>  
>>  	m_can_config_endisable(priv, true);
>>  	cccr_reg = m_can_read(priv, M_CAN_CCCR);
>>  	cccr_reg |= CCCR_NISO;
>>  	m_can_write(priv, M_CAN_CCCR, cccr_reg);
>>  
>> -	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
>> -					  (cccr_poll == cccr_reg), 0, 10);
>> +	for (i = 0; i <= 10; i++) {
>> +		cccr_poll = m_can_read(priv, M_CAN_CCCR);
>> +		if (cccr_poll == cccr_reg) {
>> +			niso_timeout = 0;
>> +			break;
>> +		}
>> +
>> +		usleep_range(1, 5);
>> +	}
>>  
>>  	/* Clear NISO */
>>  	cccr_reg &= ~(CCCR_NISO);
>> @@ -1242,107 +1269,79 @@ static bool m_can_niso_supported(const struct m_can_priv *priv)
>>  	return !niso_timeout;
>>  }
>>  
>> -static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
>> -			   void __iomem *addr)
>> +static int m_can_dev_setup(struct m_can_priv *m_can_dev)
>>  {
>> -	struct m_can_priv *priv;
>> +	struct net_device *dev = m_can_dev->net;
>>  	int m_can_version;
>>  
>> -	m_can_version = m_can_check_core_release(addr);
>> +	m_can_version = m_can_check_core_release(m_can_dev);
>>  	/* return if unsupported version */
>>  	if (!m_can_version) {
>> -		dev_err(&pdev->dev, "Unsupported version number: %2d",
>> +		dev_err(m_can_dev->dev, "Unsupported version number: %2d",
>>  			m_can_version);
>>  		return -EINVAL;
>>  	}
>>  
>> -	priv = netdev_priv(dev);
>> -	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
>> +	if (!m_can_dev->is_peripherial)
>> +		netif_napi_add(dev, &m_can_dev->napi,
>> +			       m_can_poll, M_CAN_NAPI_WEIGHT);
>>  
>>  	/* Shared properties of all M_CAN versions */
>> -	priv->version = m_can_version;
>> -	priv->dev = dev;
>> -	priv->base = addr;
>> -	priv->can.do_set_mode = m_can_set_mode;
>> -	priv->can.do_get_berr_counter = m_can_get_berr_counter;
>> +	m_can_dev->version = m_can_version;
>> +	m_can_dev->can.do_set_mode = m_can_set_mode;
>> +	m_can_dev->can.do_get_berr_counter = m_can_get_berr_counter;
>>  
>>  	/* Set M_CAN supported operations */
>> -	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
>> +	m_can_dev->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
>>  					CAN_CTRLMODE_LISTENONLY |
>>  					CAN_CTRLMODE_BERR_REPORTING |
>>  					CAN_CTRLMODE_FD;
>>  
>>  	/* Set properties depending on M_CAN version */
>> -	switch (priv->version) {
>> +	switch (m_can_dev->version) {
>>  	case 30:
>>  		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */
>>  		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
>> -		priv->can.bittiming_const = &m_can_bittiming_const_30X;
>> -		priv->can.data_bittiming_const =
>> -				&m_can_data_bittiming_const_30X;
>> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
>> +			m_can_dev->bit_timing : &m_can_bittiming_const_30X;
>> +
>> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?
>> +						m_can_dev->data_timing :
>> +						&m_can_data_bittiming_const_30X;
>>  		break;
>>  	case 31:
>>  		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
>>  		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
>> -		priv->can.bittiming_const = &m_can_bittiming_const_31X;
>> -		priv->can.data_bittiming_const =
>> -				&m_can_data_bittiming_const_31X;
>> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
>> +			m_can_dev->bit_timing : &m_can_bittiming_const_31X;
>> +
>> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?
>> +						m_can_dev->data_timing :
>> +						&m_can_data_bittiming_const_31X;
>>  		break;
>>  	case 32:
>> -		priv->can.bittiming_const = &m_can_bittiming_const_31X;
>> -		priv->can.data_bittiming_const =
>> -				&m_can_data_bittiming_const_31X;
>> -		priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)
>> +		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
>> +			m_can_dev->bit_timing : &m_can_bittiming_const_31X;
>> +
>> +		m_can_dev->can.data_bittiming_const = m_can_dev->data_timing ?
>> +						m_can_dev->data_timing :
>> +						&m_can_data_bittiming_const_31X;
>> +
>> +		m_can_dev->can.ctrlmode_supported |=
>> +						(m_can_niso_supported(m_can_dev)
>>  						? CAN_CTRLMODE_FD_NON_ISO
>>  						: 0);
>>  		break;
>>  	default:
>> -		dev_err(&pdev->dev, "Unsupported version number: %2d",
>> -			priv->version);
>> +		dev_err(m_can_dev->dev, "Unsupported version number: %2d",
>> +			m_can_dev->version);
>>  		return -EINVAL;
>>  	}
>>  
>> -	return 0;
>> -}
>> -
>> -static int m_can_open(struct net_device *dev)
>> -{
>> -	struct m_can_priv *priv = netdev_priv(dev);
>> -	int err;
>> -
>> -	err = m_can_clk_start(priv);
>> -	if (err)
>> -		return err;
>> -
>> -	/* open the can device */
>> -	err = open_candev(dev);
>> -	if (err) {
>> -		netdev_err(dev, "failed to open can device\n");
>> -		goto exit_disable_clks;
>> -	}
>> -
>> -	/* register interrupt handler */
>> -	err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
>> -			  dev);
>> -	if (err < 0) {
>> -		netdev_err(dev, "failed to request interrupt\n");
>> -		goto exit_irq_fail;
>> -	}
>> -
>> -	/* start the m_can controller */
>> -	m_can_start(dev);
>> -
>> -	can_led_event(dev, CAN_LED_EVENT_OPEN);
>> -	napi_enable(&priv->napi);
>> -	netif_start_queue(dev);
>> +	if (m_can_dev->ops->init)
>> +		m_can_dev->ops->init(m_can_dev);
>>  
>>  	return 0;
>> -
>> -exit_irq_fail:
>> -	close_candev(dev);
>> -exit_disable_clks:
>> -	m_can_clk_stop(priv);
>> -	return err;
>>  }
>>  
>>  static void m_can_stop(struct net_device *dev)
>> @@ -1361,10 +1360,18 @@ static int m_can_close(struct net_device *dev)
>>  	struct m_can_priv *priv = netdev_priv(dev);
>>  
>>  	netif_stop_queue(dev);
>> -	napi_disable(&priv->napi);
>> +	if (!priv->is_peripherial)
>> +		napi_disable(&priv->napi);
>>  	m_can_stop(dev);
>>  	m_can_clk_stop(priv);
>>  	free_irq(dev->irq, dev);
>> +
>> +	if (priv->is_peripherial) {
>> +		priv->tx_skb = NULL;
>> +		destroy_workqueue(priv->tx_wq);
>> +		priv->tx_wq = NULL;
>> +	}
>> +
>>  	close_candev(dev);
>>  	can_led_event(dev, CAN_LED_EVENT_STOP);
>>  
>> @@ -1385,18 +1392,15 @@ static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)
>>  	return !!priv->can.echo_skb[next_idx];
>>  }
>>  
>> -static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>> -				    struct net_device *dev)
>> +static netdev_tx_t m_can_tx_handler(struct m_can_priv *priv)
>>  {
>> -	struct m_can_priv *priv = netdev_priv(dev);
>> -	struct canfd_frame *cf = (struct canfd_frame *)skb->data;
>> +	struct canfd_frame *cf = (struct canfd_frame *)priv->tx_skb->data;
>> +	struct net_device *dev = priv->net;
>> +	struct sk_buff *skb = priv->tx_skb;
>>  	u32 id, cccr, fdflags;
>>  	int i;
>>  	int putidx;
>>  
>> -	if (can_dropped_invalid_skb(dev, skb))
>> -		return NETDEV_TX_OK;
>> -
>>  	/* Generate ID field for TX buffer Element */
>>  	/* Common to all supported M_CAN versions */
>>  	if (cf->can_id & CAN_EFF_FLAG) {
>> @@ -1492,14 +1496,117 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>>  		m_can_write(priv, M_CAN_TXBAR, (1 << putidx));
>>  
>>  		/* stop network queue if fifo full */
>> -			if (m_can_tx_fifo_full(priv) ||
>> -			    m_can_next_echo_skb_occupied(dev, putidx))
>> -				netif_stop_queue(dev);
>> +		if (m_can_tx_fifo_full(priv) ||
>> +		    m_can_next_echo_skb_occupied(dev, putidx))
>> +			netif_stop_queue(dev);
>> +	}
>> +
>> +	return NETDEV_TX_OK;
>> +}
>> +
>> +static void m_can_tx_work_queue(struct work_struct *ws)
>> +{
>> +	struct m_can_priv *priv = container_of(ws, struct m_can_priv,
>> +						tx_work);
>> +	netdev_tx_t ret;
>> +
>> +	ret = m_can_tx_handler(priv);
>> +	if (ret == NETDEV_TX_OK)
>> +		priv->tx_skb = NULL;
> 
> What happens to the "tx_skb" if this funtions returns with
> NETDEV_TX_BUSY? Will it be freed?

I am missing the change I put in to free this.
It must have been lost when rebasing the patch set

I will add it back and fix this up

> 
>> +}
>> +
>> +static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>> +				    struct net_device *dev)
>> +{
>> +	struct m_can_priv *priv = netdev_priv(dev);
>> +
>> +	if (can_dropped_invalid_skb(dev, skb))
>> +		return NETDEV_TX_OK;
>> +
>> +	if (priv->is_peripherial) {
>> +		if (priv->tx_skb) {
>> +			netdev_err(dev, "hard_xmit called while tx busy\n");
>> +			return NETDEV_TX_BUSY;
>> +		}
>> +
>> +		if (priv->can.state == CAN_STATE_BUS_OFF) {
>> +			m_can_clean(dev);
>> +		} else {
>> +			priv->tx_skb = skb;
>> +			netif_stop_queue(priv->net);
> 
> You stop the queue immediately, even if fifos are used. Is this by purpose?
> 

Good catch.  I should let the work queue handle this.  I see that < 3.0 stops the queue immedidately
but > 3.0 does not.

I don't know what version of core the hi or mcp parts are using it looks to be 3.0.
I believe thats where I pulled the stop from.

I will remove it.

>> +			queue_work(priv->tx_wq, &priv->tx_work);
>> +		}
>> +	} else {
>> +		priv->tx_skb = skb;
>> +		return m_can_tx_handler(priv);
>>  	}
>>  
>>  	return NETDEV_TX_OK;
>>  }
>>  
>> +static int m_can_open(struct net_device *dev)
>> +{
>> +	struct m_can_priv *priv = netdev_priv(dev);
>> +	int err;
>> +
>> +	err = m_can_clk_start(priv);
>> +	if (err)
>> +		return err;
>> +
>> +	/* open the can device */
>> +	err = open_candev(dev);
>> +	if (err) {
>> +		netdev_err(dev, "failed to open can device\n");
>> +		goto exit_disable_clks;
>> +	}
>> +
>> +	/* register interrupt handler */
>> +	if (priv->is_peripherial) {
>> +		priv->tx_skb = NULL;
>> +		priv->tx_wq = alloc_workqueue("mcan_wq",
>> +					      WQ_FREEZABLE | WQ_MEM_RECLAIM, 0);
>> +		if (!priv->tx_wq) {
>> +			err = -ENOMEM;
>> +			goto out_wq_fail;
>> +		}
>> +
>> +		INIT_WORK(&priv->tx_work, m_can_tx_work_queue);
>> +
>> +		err = request_threaded_irq(dev->irq, NULL, m_can_isr,
>> +					   IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
>> +					   dev->name, dev);
>> +	} else {
>> +		err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
>> +				  dev);
>> +	}
>> +
>> +	if (err < 0) {
>> +		netdev_err(dev, "failed to request interrupt\n");
>> +		goto exit_irq_fail;
>> +	}
>> +
>> +	/* start the m_can controller */
>> +	m_can_start(dev);
>> +
>> +	can_led_event(dev, CAN_LED_EVENT_OPEN);
>> +
>> +	if (!priv->is_peripherial)
>> +		napi_enable(&priv->napi);
>> +
>> +	netif_start_queue(dev);
>> +
>> +	return 0;
>> +
>> +exit_irq_fail:
>> +	if (priv->is_peripherial)
>> +		destroy_workqueue(priv->tx_wq);
>> +out_wq_fail:
>> +	close_candev(dev);
>> +exit_disable_clks:
>> +	m_can_clk_stop(priv);
>> +	return err;
>> +}
>> +
>>  static const struct net_device_ops m_can_netdev_ops = {
>>  	.ndo_open = m_can_open,
>>  	.ndo_stop = m_can_close,
>> @@ -1515,20 +1622,6 @@ static int register_m_can_dev(struct net_device *dev)
>>  	return register_candev(dev);
>>  }
>>  
>> -static void m_can_init_ram(struct m_can_priv *priv)
>> -{
>> -	int end, i, start;
>> -
>> -	/* initialize the entire Message RAM in use to avoid possible
>> -	 * ECC/parity checksum errors when reading an uninitialized buffer
>> -	 */
>> -	start = priv->mcfg[MRAM_SIDF].off;
>> -	end = priv->mcfg[MRAM_TXB].off +
>> -		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
>> -	for (i = start; i < end; i += 4)
>> -		writel(0x0, priv->mram_base + i);
>> -}
>> -
>>  static void m_can_of_parse_mram(struct m_can_priv *priv,
>>  				const u32 *mram_config_vals)
>>  {
>> @@ -1556,9 +1649,8 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
>>  	priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &
>>  			(TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);
>>  
>> -	dev_dbg(priv->device,
>> -		"mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
>> -		priv->mram_base,
>> +	dev_dbg(priv->dev,
>> +		"sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
>>  		priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,
>>  		priv->mcfg[MRAM_XIDF].off, priv->mcfg[MRAM_XIDF].num,
>>  		priv->mcfg[MRAM_RXF0].off, priv->mcfg[MRAM_RXF0].num,
>> @@ -1566,63 +1658,55 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
>>  		priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,
>>  		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
>>  		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
>> -
>> -	m_can_init_ram(priv);
>>  }
>>  
>> -static int m_can_plat_probe(struct platform_device *pdev)
>> +void m_can_init_ram(struct m_can_priv *priv)
>>  {
>> -	struct net_device *dev;
>> -	struct m_can_priv *priv;
>> -	struct resource *res;
>> -	void __iomem *addr;
>> -	void __iomem *mram_addr;
>> -	struct clk *hclk, *cclk;
>> -	int irq, ret;
>> -	struct device_node *np;
>> -	u32 mram_config_vals[MRAM_CFG_LEN];
>> -	u32 tx_fifo_size;
>> -
>> -	np = pdev->dev.of_node;
>> +	int end, i, start;
>>  
>> -	hclk = devm_clk_get(&pdev->dev, "hclk");
>> -	cclk = devm_clk_get(&pdev->dev, "cclk");
>> +	/* initialize the entire Message RAM in use to avoid possible
>> +	 * ECC/parity checksum errors when reading an uninitialized buffer
>> +	 */
>> +	start = priv->mcfg[MRAM_SIDF].off;
>> +	end = priv->mcfg[MRAM_TXB].off +
>> +		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
>>  
>> -	if (IS_ERR(hclk) || IS_ERR(cclk)) {
>> -		dev_err(&pdev->dev, "no clock found\n");
>> -		ret = -ENODEV;
>> -		goto failed_ret;
>> -	}
>> +	for (i = start; i < end; i += 4)
>> +		m_can_fifo_write_no_off(priv, i, 0x0);
>> +}
>> +EXPORT_SYMBOL_GPL(m_can_init_ram);
>>  
>> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>> -	addr = devm_ioremap_resource(&pdev->dev, res);
>> -	irq = platform_get_irq_byname(pdev, "int0");
>> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev)
>> +{
>> +	int ret = 0;
>>  
>> -	if (IS_ERR(addr) || irq < 0) {
>> -		ret = -EINVAL;
>> -		goto failed_ret;
>> -	}
>> +	m_can_dev->hclk = devm_clk_get(m_can_dev->dev, "hclk");
>> +	m_can_dev->cclk = devm_clk_get(m_can_dev->dev, "cclk");
>>  
>> -	/* message ram could be shared */
>> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>> -	if (!res) {
>> +	if (IS_ERR(m_can_dev->cclk)) {
>> +		dev_err(m_can_dev->dev, "no clock found\n");
>>  		ret = -ENODEV;
>> -		goto failed_ret;
>>  	}
>>  
>> -	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>> -	if (!mram_addr) {
>> -		ret = -ENOMEM;
>> -		goto failed_ret;
>> -	}
>> +	return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(m_can_class_get_clocks);
>>  
>> -	/* get message ram configuration */
>> -	ret = of_property_read_u32_array(np, "bosch,mram-cfg",
>> -					 mram_config_vals,
>> -					 sizeof(mram_config_vals) / 4);
>> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev)
>> +{
>> +	struct m_can_priv *class_dev = NULL;
>> +	u32 mram_config_vals[MRAM_CFG_LEN];
>> +	struct net_device *net_dev;
>> +	u32 tx_fifo_size;
>> +	int ret;
>> +
>> +	ret = fwnode_property_read_u32_array(dev_fwnode(dev),
>> +					     "bosch,mram-cfg",
>> +					     mram_config_vals,
>> +					     sizeof(mram_config_vals) / 4);
>>  	if (ret) {
>> -		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
>> -		goto failed_ret;
>> +		dev_err(dev, "Could not get Message RAM configuration.");
>> +		goto out;
>>  	}
>>  
>>  	/* Get TX FIFO size
>> @@ -1631,66 +1715,74 @@ static int m_can_plat_probe(struct platform_device *pdev)
>>  	tx_fifo_size = mram_config_vals[7];
>>  
>>  	/* allocate the m_can device */
>> -	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
>> -	if (!dev) {
>> -		ret = -ENOMEM;
>> -		goto failed_ret;
>> +	net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);
>> +	if (!net_dev) {
>> +		dev_err(dev, "Failed to allocate CAN device");
>> +		goto out;
>> +	}
>> +
>> +	class_dev = netdev_priv(net_dev);
>> +	if (!class_dev) {
>> +		dev_err(dev, "Failed to init netdev private");
>> +		goto out;
>>  	}
>>  
>> -	priv = netdev_priv(dev);
>> -	dev->irq = irq;
>> -	priv->device = &pdev->dev;
>> -	priv->hclk = hclk;
>> -	priv->cclk = cclk;
>> -	priv->can.clock.freq = clk_get_rate(cclk);
>> -	priv->mram_base = mram_addr;
>> +	class_dev->net = net_dev;
>> +	class_dev->dev = dev;
>> +	SET_NETDEV_DEV(net_dev, dev);
>>  
>> -	platform_set_drvdata(pdev, dev);
>> -	SET_NETDEV_DEV(dev, &pdev->dev);
>> +	m_can_of_parse_mram(class_dev, mram_config_vals);
>> +out:
>> +	return class_dev;
>> +}
>> +EXPORT_SYMBOL_GPL(m_can_class_allocate_dev);
>>  
>> -	/* Enable clocks. Necessary to read Core Release in order to determine
>> -	 * M_CAN version
>> -	 */
>> -	pm_runtime_enable(&pdev->dev);
>> -	ret = m_can_clk_start(priv);
>> -	if (ret)
>> -		goto pm_runtime_fail;
>> +int m_can_class_register(struct m_can_priv *m_can_dev)
>> +{
>> +	int ret;
>> +
>> +	if (m_can_dev->pm_clock_support) {
>> +		pm_runtime_enable(m_can_dev->dev);
>> +		ret = m_can_clk_start(m_can_dev);
>> +		if (ret)
>> +			goto pm_runtime_fail;
>> +	}
>>  
>> -	ret = m_can_dev_setup(pdev, dev, addr);
>> +	ret = m_can_dev_setup(m_can_dev);
>>  	if (ret)
>>  		goto clk_disable;
>>  
>> -	ret = register_m_can_dev(dev);
>> +	ret = register_m_can_dev(m_can_dev->net);
>>  	if (ret) {
>> -		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
>> -			KBUILD_MODNAME, ret);
>> +		dev_err(m_can_dev->dev, "registering %s failed (err=%d)\n",
>> +			m_can_dev->net->name, ret);
>>  		goto clk_disable;
>>  	}
>>  
>> -	m_can_of_parse_mram(priv, mram_config_vals);
>> +	devm_can_led_init(m_can_dev->net);
>>  
>> -	devm_can_led_init(dev);
>> +	of_can_transceiver(m_can_dev->net);
>>  
>> -	of_can_transceiver(dev);
>> -
>> -	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
>> -		 KBUILD_MODNAME, dev->irq, priv->version);
>> +	dev_info(m_can_dev->dev, "%s device registered (irq=%d, version=%d)\n",
>> +		 KBUILD_MODNAME, m_can_dev->net->irq, m_can_dev->version);
>>  
>>  	/* Probe finished
>>  	 * Stop clocks. They will be reactivated once the M_CAN device is opened
>>  	 */
>>  clk_disable:
>> -	m_can_clk_stop(priv);
>> +	m_can_clk_stop(m_can_dev);
>>  pm_runtime_fail:
>>  	if (ret) {
>> -		pm_runtime_disable(&pdev->dev);
>> -		free_candev(dev);
>> +		if (m_can_dev->pm_clock_support)
>> +			pm_runtime_disable(m_can_dev->dev);
>> +		free_candev(m_can_dev->net);
>>  	}
>> -failed_ret:
>> +
>>  	return ret;
>>  }
>> +EXPORT_SYMBOL_GPL(m_can_class_register);
>>  
>> -static __maybe_unused int m_can_suspend(struct device *dev)
>> +int m_can_class_suspend(struct device *dev)
>>  {
>>  	struct net_device *ndev = dev_get_drvdata(dev);
>>  	struct m_can_priv *priv = netdev_priv(ndev);
>> @@ -1708,8 +1800,9 @@ static __maybe_unused int m_can_suspend(struct device *dev)
>>  
>>  	return 0;
>>  }
>> +EXPORT_SYMBOL_GPL(m_can_class_suspend);
>>  
>> -static __maybe_unused int m_can_resume(struct device *dev)
>> +int m_can_class_resume(struct device *dev)
>>  {
>>  	struct net_device *ndev = dev_get_drvdata(dev);
>>  	struct m_can_priv *priv = netdev_priv(ndev);
>> @@ -1733,79 +1826,19 @@ static __maybe_unused int m_can_resume(struct device *dev)
>>  
>>  	return 0;
>>  }
>> +EXPORT_SYMBOL_GPL(m_can_class_resume);
>>  
>> -static void unregister_m_can_dev(struct net_device *dev)
>> -{
>> -	unregister_candev(dev);
>> -}
>> -
>> -static int m_can_plat_remove(struct platform_device *pdev)
>> -{
>> -	struct net_device *dev = platform_get_drvdata(pdev);
>> -
>> -	unregister_m_can_dev(dev);
>> -
>> -	pm_runtime_disable(&pdev->dev);
>> -
>> -	platform_set_drvdata(pdev, NULL);
>> -
>> -	free_candev(dev);
>> -
>> -	return 0;
>> -}
>> -
>> -static int __maybe_unused m_can_runtime_suspend(struct device *dev)
>> +void m_can_class_unregister(struct m_can_priv *m_can_dev)
>>  {
>> -	struct net_device *ndev = dev_get_drvdata(dev);
>> -	struct m_can_priv *priv = netdev_priv(ndev);
>> +	unregister_candev(m_can_dev->net);
>>  
>> -	clk_disable_unprepare(priv->cclk);
>> -	clk_disable_unprepare(priv->hclk);
>> +	m_can_clk_stop(m_can_dev);
>>  
>> -	return 0;
>> +	free_candev(m_can_dev->net);
>>  }
>> -
>> -static int __maybe_unused m_can_runtime_resume(struct device *dev)
>> -{
>> -	struct net_device *ndev = dev_get_drvdata(dev);
>> -	struct m_can_priv *priv = netdev_priv(ndev);
>> -	int err;
>> -
>> -	err = clk_prepare_enable(priv->hclk);
>> -	if (err)
>> -		return err;
>> -
>> -	err = clk_prepare_enable(priv->cclk);
>> -	if (err)
>> -		clk_disable_unprepare(priv->hclk);
>> -
>> -	return err;
>> -}
>> -
>> -static const struct dev_pm_ops m_can_pmops = {
>> -	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
>> -			   m_can_runtime_resume, NULL)
>> -	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
>> -};
>> -
>> -static const struct of_device_id m_can_of_table[] = {
>> -	{ .compatible = "bosch,m_can", .data = NULL },
>> -	{ /* sentinel */ },
>> -};
>> -MODULE_DEVICE_TABLE(of, m_can_of_table);
>> -
>> -static struct platform_driver m_can_plat_driver = {
>> -	.driver = {
>> -		.name = KBUILD_MODNAME,
>> -		.of_match_table = m_can_of_table,
>> -		.pm     = &m_can_pmops,
>> -	},
>> -	.probe = m_can_plat_probe,
>> -	.remove = m_can_plat_remove,
>> -};
>> -
>> -module_platform_driver(m_can_plat_driver);
>> +EXPORT_SYMBOL_GPL(m_can_class_unregister);
>>  
>>  MODULE_AUTHOR("Dong Aisheng <b29396@...escale.com>");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@...com>");
>>  MODULE_LICENSE("GPL v2");
>>  MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");
>> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
>> new file mode 100644
>> index 000000000000..b60f27dd9f33
>> --- /dev/null
>> +++ b/drivers/net/can/m_can/m_can.h
>> @@ -0,0 +1,110 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* CAN bus driver for Bosch M_CAN controller
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#ifndef _CAN_M_CAN_H_
>> +#define _CAN_M_CAN_H_
>> +
>> +#include <linux/can/core.h>
>> +#include <linux/can/led.h>
>> +#include <linux/completion.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/freezer.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/netdevice.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/can/dev.h>
>> +#include <linux/pinctrl/consumer.h>
>> +
>> +/* m_can lec values */
>> +enum m_can_lec_type {
>> +	LEC_NO_ERROR = 0,
>> +	LEC_STUFF_ERROR,
>> +	LEC_FORM_ERROR,
>> +	LEC_ACK_ERROR,
>> +	LEC_BIT1_ERROR,
>> +	LEC_BIT0_ERROR,
>> +	LEC_CRC_ERROR,
>> +	LEC_UNUSED,
>> +};
>> +
>> +enum m_can_mram_cfg {
>> +	MRAM_SIDF = 0,
>> +	MRAM_XIDF,
>> +	MRAM_RXF0,
>> +	MRAM_RXF1,
>> +	MRAM_RXB,
>> +	MRAM_TXE,
>> +	MRAM_TXB,
>> +	MRAM_CFG_NUM,
>> +};
>> +
>> +/* address offset and element number for each FIFO/Buffer in the Message RAM */
>> +struct mram_cfg {
>> +	u16 off;
>> +	u8  num;
>> +};
>> +
>> +struct m_can_priv;
>> +struct m_can_ops {
>> +	/* Device specific call backs */
>> +	int (*clear_interrupts)(struct m_can_priv *m_can_class);
>> +	u32 (*read_reg)(struct m_can_priv *m_can_class, int reg);
>> +	int (*write_reg)(struct m_can_priv *m_can_class, int reg, int val);
>> +	u32 (*read_fifo)(struct m_can_priv *m_can_class, int addr_offset);
>> +	int (*write_fifo)(struct m_can_priv *m_can_class, int addr_offset,
>> +			  int val);
>> +	int (*init)(struct m_can_priv *m_can_class);
>> +};
>> +
>> +struct m_can_priv {
>> +	struct can_priv can;
>> +	struct napi_struct napi;
>> +	struct net_device *net;
>> +	struct device *dev;
>> +	struct clk *hclk;
>> +	struct clk *cclk;
>> +
>> +	struct workqueue_struct *tx_wq;
>> +	struct work_struct tx_work;
>> +	struct sk_buff *tx_skb;
>> +
>> +	struct can_bittiming_const *bit_timing;
>> +	struct can_bittiming_const *data_timing;
>> +
>> +	struct m_can_ops *ops;
>> +
>> +	void *device_data;
>> +
>> +	int version;
>> +	int freq;
>> +	u32 irqstatus;
>> +
>> +	int pm_clock_support;
>> +	int is_peripherial;
>> +
>> +	struct mram_cfg mcfg[MRAM_CFG_NUM];
>> +};
>> +
>> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev);
>> +int m_can_class_register(struct m_can_priv *m_can_dev);
>> +void m_can_class_unregister(struct m_can_priv *m_can_dev);
>> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev);
>> +void m_can_init_ram(struct m_can_priv *priv);
>> +void m_can_config_endisable(struct m_can_priv *priv, bool enable);
>> +
>> +int m_can_class_suspend(struct device *dev);
>> +int m_can_class_resume(struct device *dev);
>> +#endif	/* _CAN_M_H_ */
>> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
>> new file mode 100644
>> index 000000000000..b02d49f9ee4c
>> --- /dev/null
>> +++ b/drivers/net/can/m_can/m_can_platform.c
>> @@ -0,0 +1,202 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// IOMapped CAN bus driver for Bosch M_CAN controller
>> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
>> +//	Dong Aisheng <b29396@...escale.com>
>> +//
>> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +#include <linux/platform_device.h>
>> +
>> +#include "m_can.h"
>> +
>> +struct m_can_plat_priv {
>> +	void __iomem *base;
>> +	void __iomem *mram_base;
>> +};
>> +
>> +static u32 iomap_read_reg(struct m_can_priv *cdev, int reg)
>> +{
>> +	struct m_can_plat_priv *priv =
>> +			(struct m_can_plat_priv *)cdev->device_data;
>> +
>> +	return readl(priv->base + reg);
>> +}
>> +
>> +static u32 iomap_read_fifo(struct m_can_priv *cdev, int offset)
>> +{
>> +	struct m_can_plat_priv *priv =
>> +			(struct m_can_plat_priv *)cdev->device_data;
>> +
>> +	return readl(priv->mram_base + offset);
>> +}
>> +
>> +static int iomap_write_reg(struct m_can_priv *cdev, int reg, int val)
>> +{
>> +	struct m_can_plat_priv *priv =
>> +			(struct m_can_plat_priv *)cdev->device_data;
>> +
>> +	writel(val, priv->base + reg);
>> +
>> +	return 0;
>> +}
>> +
>> +static int iomap_write_fifo(struct m_can_priv *cdev, int offset, int val)
>> +{
>> +	struct m_can_plat_priv *priv =
>> +			(struct m_can_plat_priv *)cdev->device_data;
>> +
>> +	writel(val, priv->mram_base + offset);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct m_can_ops m_can_plat_ops = {
>> +	.read_reg = iomap_read_reg,
>> +	.write_reg = iomap_write_reg,
>> +	.write_fifo = iomap_write_fifo,
>> +	.read_fifo = iomap_read_fifo,
>> +};
>> +
>> +static int m_can_plat_probe(struct platform_device *pdev)
>> +{
>> +	struct m_can_priv *mcan_class;
>> +	struct m_can_plat_priv *priv;
>> +	struct resource *res;
>> +	void __iomem *addr;
>> +	void __iomem *mram_addr;
>> +	int irq, ret = 0;
>> +
>> +	mcan_class = m_can_class_allocate_dev(&pdev->dev);
>> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	mcan_class->device_data = priv;
>> +
>> +	m_can_class_get_clocks(mcan_class);
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>> +	addr = devm_ioremap_resource(&pdev->dev, res);
>> +	irq = platform_get_irq_byname(pdev, "int0");
>> +	if (IS_ERR(addr) || irq < 0) {
>> +		ret = -EINVAL;
>> +		goto failed_ret;
>> +	}
>> +
>> +	/* message ram could be shared */
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>> +	if (!res) {
>> +		ret = -ENODEV;
>> +		goto failed_ret;
>> +	}
>> +
>> +	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>> +	if (!mram_addr) {
>> +		ret = -ENOMEM;
>> +		goto failed_ret;
>> +	}
>> +
>> +	priv->base = addr;
>> +	priv->mram_base = mram_addr;
>> +
>> +	mcan_class->net->irq = irq;
>> +	mcan_class->pm_clock_support = 1;
>> +	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
>> +	mcan_class->dev = &pdev->dev;
>> +
>> +	mcan_class->ops = &m_can_plat_ops;
>> +
>> +	mcan_class->is_peripherial = false;
>> +
>> +	platform_set_drvdata(pdev, mcan_class->dev);
>> +
>> +	m_can_init_ram(mcan_class);
>> +
>> +	ret = m_can_class_register(mcan_class);
>> +
>> +failed_ret:
>> +	return ret;
>> +}
>> +
>> +static __maybe_unused int m_can_suspend(struct device *dev)
>> +{
>> +	return m_can_class_suspend(dev);
>> +}
>> +
>> +static __maybe_unused int m_can_resume(struct device *dev)
>> +{
>> +	return m_can_class_resume(dev);
>> +}
>> +
>> +static int m_can_plat_remove(struct platform_device *pdev)
>> +{
>> +	struct net_device *dev = platform_get_drvdata(pdev);
>> +	struct m_can_priv *mcan_class = netdev_priv(dev);
>> +
>> +	m_can_class_unregister(mcan_class);
>> +
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +
>> +static int __maybe_unused m_can_runtime_suspend(struct device *dev)
>> +{
>> +	struct net_device *ndev = dev_get_drvdata(dev);
>> +	struct m_can_priv *mcan_class = netdev_priv(ndev);
>> +
>> +	m_can_class_suspend(dev);
>> +
>> +	clk_disable_unprepare(mcan_class->cclk);
>> +	clk_disable_unprepare(mcan_class->hclk);
>> +
>> +	return 0;
>> +}
>> +
>> +static int __maybe_unused m_can_runtime_resume(struct device *dev)
>> +{
>> +	struct net_device *ndev = dev_get_drvdata(dev);
>> +	struct m_can_priv *mcan_class = netdev_priv(ndev);
>> +	int err;
>> +
>> +	err = clk_prepare_enable(mcan_class->hclk);
>> +	if (err)
>> +		return err;
>> +
>> +	err = clk_prepare_enable(mcan_class->cclk);
>> +	if (err)
>> +		clk_disable_unprepare(mcan_class->hclk);
>> +
>> +	m_can_class_resume(dev);
>> +
>> +	return err;
>> +}
>> +
>> +static const struct dev_pm_ops m_can_pmops = {
>> +	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
>> +			   m_can_runtime_resume, NULL)
>> +	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
>> +};
>> +
>> +static const struct of_device_id m_can_of_table[] = {
>> +	{ .compatible = "bosch,m_can", .data = NULL },
>> +	{ /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, m_can_of_table);
>> +
>> +static struct platform_driver m_can_plat_driver = {
>> +	.driver = {
>> +		.name = KBUILD_MODNAME,
>> +		.of_match_table = m_can_of_table,
>> +		.pm     = &m_can_pmops,
>> +	},
>> +	.probe = m_can_plat_probe,
>> +	.remove = m_can_plat_remove,
>> +};
>> +
>> +module_platform_driver(m_can_plat_driver);
>> +
>> +MODULE_AUTHOR("Dong Aisheng <b29396@...escale.com>");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@...com>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("M_CAN driver for IO Mapped Bosch controllers");
> 
> Wolfgang.
> 


-- 
------------------
Dan Murphy

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ