| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190319184930.72977-4-andriy.shevchenko@linux.intel.com>
Date: Tue, 19 Mar 2019 20:49:20 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v2 03/13] enc28j60: Replace dev_*(&netdev->dev, ...) with netdev_*()
Replace open coded netdev_<level>() macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/net/ethernet/microchip/enc28j60.c | 42 ++++++++++-------------
1 file changed, 18 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/microchip/enc28j60.c b/drivers/net/ethernet/microchip/enc28j60.c
index 874ec5f6c4e4..5ea81f07af41 100644
--- a/drivers/net/ethernet/microchip/enc28j60.c
+++ b/drivers/net/ethernet/microchip/enc28j60.c
@@ -790,14 +790,12 @@ enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
priv->full_duplex = (duplex == DUPLEX_FULL);
else {
if (netif_msg_link(priv))
- dev_warn(&ndev->dev,
- "unsupported link setting\n");
+ netdev_warn(ndev, "unsupported link setting\n");
ret = -EOPNOTSUPP;
}
} else {
if (netif_msg_link(priv))
- dev_warn(&ndev->dev, "Warning: hw must be disabled "
- "to set link mode\n");
+ netdev_warn(ndev, "Warning: hw must be disabled to set link mode\n");
ret = -EBUSY;
}
return ret;
@@ -912,9 +910,8 @@ static void enc28j60_hw_rx(struct net_device *ndev)
if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
if (netif_msg_rx_err(priv))
- dev_err(&ndev->dev,
- "%s() Invalid packet address!! 0x%04x\n",
- __func__, priv->next_pk_ptr);
+ netdev_err(ndev, "%s() Invalid packet address!! 0x%04x\n",
+ __func__, priv->next_pk_ptr);
/* packet address corrupted: reset RX logic */
mutex_lock(&priv->lock);
nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
@@ -947,7 +944,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
if (netif_msg_rx_err(priv))
- dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+ netdev_err(ndev, "Rx Error (%04x)\n", rxstat);
ndev->stats.rx_errors++;
if (RSV_GETBIT(rxstat, RSV_CRCERROR))
ndev->stats.rx_crc_errors++;
@@ -959,8 +956,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
skb = netdev_alloc_skb(ndev, len + NET_IP_ALIGN);
if (!skb) {
if (netif_msg_rx_err(priv))
- dev_err(&ndev->dev,
- "out of memory for Rx'd frame\n");
+ netdev_err(ndev, "out of memory for Rx'd frame\n");
ndev->stats.rx_dropped++;
} else {
skb_reserve(skb, NET_IP_ALIGN);
@@ -1056,11 +1052,11 @@ static void enc28j60_check_link_status(struct net_device *ndev)
if (reg & PHSTAT2_LSTAT) {
netif_carrier_on(ndev);
if (netif_msg_ifup(priv))
- dev_info(&ndev->dev, "link up - %s\n",
- duplex ? "Full duplex" : "Half duplex");
+ netdev_info(ndev, "link up - %s\n",
+ duplex ? "Full duplex" : "Half duplex");
} else {
if (netif_msg_ifdown(priv))
- dev_info(&ndev->dev, "link down\n");
+ netdev_info(ndev, "link down\n");
netif_carrier_off(ndev);
}
}
@@ -1156,8 +1152,7 @@ static void enc28j60_irq_work_handler(struct work_struct *work)
priv->tx_retry_count = 0;
if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
if (netif_msg_tx_err(priv))
- dev_err(&ndev->dev,
- "Tx Error (aborted)\n");
+ netdev_err(ndev, "Tx Error (aborted)\n");
err = true;
}
if (netif_msg_tx_done(priv)) {
@@ -1327,7 +1322,7 @@ static void enc28j60_tx_timeout(struct net_device *ndev)
struct enc28j60_net *priv = netdev_priv(ndev);
if (netif_msg_timer(priv))
- dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+ netdev_err(ndev, "tx timeout\n");
ndev->stats.tx_errors++;
/* can't restart safely under softirq */
@@ -1348,8 +1343,7 @@ static int enc28j60_net_open(struct net_device *dev)
if (!is_valid_ether_addr(dev->dev_addr)) {
if (netif_msg_ifup(priv))
- dev_err(&dev->dev, "invalid MAC address %pM\n",
- dev->dev_addr);
+ netdev_err(dev, "invalid MAC address %pM\n", dev->dev_addr);
return -EADDRNOTAVAIL;
}
/* Reset the hardware here (and take it out of low power mode) */
@@ -1357,7 +1351,7 @@ static int enc28j60_net_open(struct net_device *dev)
enc28j60_hw_disable(priv);
if (!enc28j60_hw_init(priv)) {
if (netif_msg_ifup(priv))
- dev_err(&dev->dev, "hw_reset() failed\n");
+ netdev_err(dev, "hw_reset() failed\n");
return -EINVAL;
}
/* Update the MAC address (in case user has changed it) */
@@ -1399,16 +1393,16 @@ static void enc28j60_set_multicast_list(struct net_device *dev)
if (dev->flags & IFF_PROMISC) {
if (netif_msg_link(priv))
- dev_info(&dev->dev, "promiscuous mode\n");
+ netdev_info(dev, "promiscuous mode\n");
priv->rxfilter = RXFILTER_PROMISC;
} else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
if (netif_msg_link(priv))
- dev_info(&dev->dev, "%smulticast mode\n",
- (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+ netdev_info(dev, "%smulticast mode\n",
+ (dev->flags & IFF_ALLMULTI) ? "all-" : "");
priv->rxfilter = RXFILTER_MULTI;
} else {
if (netif_msg_link(priv))
- dev_info(&dev->dev, "normal mode\n");
+ netdev_info(dev, "normal mode\n");
priv->rxfilter = RXFILTER_NORMAL;
}
@@ -1452,7 +1446,7 @@ static void enc28j60_restart_work_handler(struct work_struct *work)
enc28j60_net_close(ndev);
ret = enc28j60_net_open(ndev);
if (unlikely(ret)) {
- dev_info(&ndev->dev, " could not restart %d\n", ret);
+ netdev_info(ndev, "could not restart %d\n", ret);
dev_close(ndev);
}
}
--
2.20.1
Powered by blists - more mailing lists