[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <52aa854a-2dc0-c437-7bfc-e74d6e06cf0a@ti.com>
Date: Tue, 19 Mar 2019 14:53:17 -0500
From: Dan Murphy <dmurphy@...com>
To: Florian Fainelli <f.fainelli@...il.com>, <andrew@...n.ch>
CC: <hkallweit1@...il.com>, <davem@...emloft.net>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] net: phy: Add DP83825I to the DP83822 driver
Florian
Thanks for the quick review
On 3/19/19 1:55 PM, Florian Fainelli wrote:
> On 3/19/19 11:32 AM, Dan Murphy wrote:
>> Add the DP83825I ethernet PHY to the DP83822 driver.
>> These devices share the same WoL register bits and addresses.
>>
>> The phy_driver init was made into a macro as there may be future
>> devices appended to this driver that will share the register space.
>>
>> http://www.ti.com/lit/gpn/dp83825i
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>
> Looks good, just a few nitpits below:
>
>> ---
>> drivers/net/phy/dp83822.c | 36 ++++++++++++++++++++++--------------
>> 1 file changed, 22 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
>> index bbd8c22067f3..02dc05b86326 100644
>> --- a/drivers/net/phy/dp83822.c
>> +++ b/drivers/net/phy/dp83822.c
>> @@ -15,6 +15,8 @@
>> #include <linux/netdevice.h>
>>
>> #define DP83822_PHY_ID 0x2000a240
>> +#define DP83825I_PHY_ID 0x2000a150
>> +
>> #define DP83822_DEVADDR 0x1f
>>
>> #define MII_DP83822_PHYSCR 0x11
>> @@ -304,26 +306,32 @@ static int dp83822_resume(struct phy_device *phydev)
>> return 0;
>> }
>>
>> +#define DP83822_PHY_DRIVER(_id, _name) \
>> + { \
>> + .phy_id = _id, \
>
> I would put the _id argument between parenthesis to guarantee evaluation
> order in case you need to do smart things about the ID in the future.
>
>> + .phy_id_mask = 0xfffffff0, \
>
> You can replace those two lines with PHY_ID_MATCH_MODEL()
>
Ack to both above. I will replace this with the macro. I assume I don't have to wrap
_id in additional parenthesis when using the macro.
>> + .name = _name, \
>
> Likewise
>
Ack to adding parenthesis around the _name
>> + .features = PHY_BASIC_FEATURES, \
>> + \
>
> Looks like you have an extra newline here.
>
Ack
> With that fixed:
>
> Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
>
>> + .soft_reset = dp83822_phy_reset, \
>> + .config_init = dp83822_config_init, \
>> + .get_wol = dp83822_get_wol, \
>> + .set_wol = dp83822_set_wol, \
>> + .ack_interrupt = dp83822_ack_interrupt, \
>> + .config_intr = dp83822_config_intr, \
>> + .suspend = dp83822_suspend, \
>> + .resume = dp83822_resume, \
>> + }
>> +
>> static struct phy_driver dp83822_driver[] = {
>> - {
>> - .phy_id = DP83822_PHY_ID,
>> - .phy_id_mask = 0xfffffff0,
>> - .name = "TI DP83822",
>> - .features = PHY_BASIC_FEATURES,
>> - .config_init = dp83822_config_init,
>> - .soft_reset = dp83822_phy_reset,
>> - .get_wol = dp83822_get_wol,
>> - .set_wol = dp83822_set_wol,
>> - .ack_interrupt = dp83822_ack_interrupt,
>> - .config_intr = dp83822_config_intr,
>> - .suspend = dp83822_suspend,
>> - .resume = dp83822_resume,
>> - },
>> + DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
>> + DP83822_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
>> };
>> module_phy_driver(dp83822_driver);
>>
>> static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
>> { DP83822_PHY_ID, 0xfffffff0 },
>> + { DP83825I_PHY_ID, 0xfffffff0 },
>> { },
>> };
>> MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
>>
>
>
--
------------------
Dan Murphy
Powered by blists - more mailing lists