| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b848cdf8-2ee6-e1b2-ad67-7557cf1622de@gmail.com>
Date: Sun, 24 Mar 2019 16:04:11 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
David Miller <davem@...emloft.net>,
"John W. Linville" <linville@...driver.com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next 2/2] net: phy: marvell: add PHY tunable fast link
down support for 88E1540
1000BaseT standard requires that a link is reported as down earliest
after 750ms. Several use case however require a much faster detecion
of a broken link. Fast Link Down supports this by intentionally
violating a the standard. This patch exposes the Fast Link Down
feature of 88E1540 and 88E6390. These PHY's can be found as internal
PHY's in several switches: 88E6352, 88E6240, 88E6176, 88E6172,
and 88E6390(X). Fast Link Down and EEE are mutually exclusive.
Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
drivers/net/phy/marvell.c | 108 ++++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3ccba37bd..65350186d 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -29,6 +29,7 @@
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
+#include <linux/bitfield.h>
#include <linux/of.h>
#include <linux/io.h>
@@ -91,6 +92,14 @@
#define MII_88E1510_TEMP_SENSOR 0x1b
#define MII_88E1510_TEMP_SENSOR_MASK 0xff
+#define MII_88E1540_COPPER_CTRL3 0x1a
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK GENMASK(11, 10)
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS 0
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS 1
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS 2
+#define MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS 3
+#define MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN BIT(9)
+
#define MII_88E6390_MISC_TEST 0x1b
#define MII_88E6390_MISC_TEST_SAMPLE_1S 0
#define MII_88E6390_MISC_TEST_SAMPLE_10MS BIT(14)
@@ -1025,6 +1034,101 @@ static int m88e1145_config_init(struct phy_device *phydev)
return 0;
}
+static int m88e1540_get_fld(struct phy_device *phydev, u8 *msecs)
+{
+ int val;
+
+ val = phy_read(phydev, MII_88E1540_COPPER_CTRL3);
+ if (val < 0)
+ return val;
+
+ if (!(val & MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN)) {
+ *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF;
+ return 0;
+ }
+
+ val = FIELD_GET(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
+
+ switch (val) {
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS:
+ *msecs = 0;
+ break;
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS:
+ *msecs = 10;
+ break;
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS:
+ *msecs = 20;
+ break;
+ case MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS:
+ *msecs = 40;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int m88e1540_set_fld(struct phy_device *phydev, const u8 *msecs)
+{
+ struct ethtool_eee eee;
+ int val, ret;
+
+ if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF)
+ return phy_clear_bits(phydev, MII_88E1540_COPPER_CTRL3,
+ MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN);
+
+ /* According to the Marvell data sheet EEE must be disabled for
+ * Fast Link Down detection to work properly
+ */
+ ret = phy_ethtool_get_eee(phydev, &eee);
+ if (!ret && eee.eee_enabled) {
+ phydev_warn(phydev, "Fast Link Down detection requires EEE to be disabled!\n");
+ return -EBUSY;
+ }
+
+ if (*msecs <= 5)
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_00MS;
+ else if (*msecs <= 15)
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_10MS;
+ else if (*msecs <= 30)
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_20MS;
+ else
+ val = MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_40MS;
+
+ val = FIELD_PREP(MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
+
+ ret = phy_modify(phydev, MII_88E1540_COPPER_CTRL3,
+ MII_88E1540_COPPER_CTRL3_LINK_DOWN_DELAY_MASK, val);
+ if (ret)
+ return ret;
+
+ return phy_set_bits(phydev, MII_88E1540_COPPER_CTRL3,
+ MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN);
+}
+
+static int m88e1540_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_FAST_LINK_DOWN:
+ return m88e1540_get_fld(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int m88e1540_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_FAST_LINK_DOWN:
+ return m88e1540_set_fld(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
/* The VOD can be out of specification on link up. Poke an
* undocumented register, in an undocumented page, with a magic value
* to fix this.
@@ -2247,6 +2351,8 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ .get_tunable = m88e1540_get_tunable,
+ .set_tunable = m88e1540_set_tunable,
},
{
.phy_id = MARVELL_PHY_ID_88E1545,
@@ -2307,6 +2413,8 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ .get_tunable = m88e1540_get_tunable,
+ .set_tunable = m88e1540_set_tunable,
},
};
--
2.21.0
Powered by blists - more mailing lists