[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190331174232.22060-7-olteanv@gmail.com>
Date: Sun, 31 Mar 2019 20:42:21 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: f.fainelli@...il.com, vivien.didelot@...il.com, andrew@...n.ch,
davem@...emloft.net
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linus.walleij@...aro.org, georg.waibel@...sor-technik.de,
Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next 06/17] net: dsa: Call driver's setup callback after setting up its switchdev notifier
This allows the driver to perform some manipulations of its own during
setup, using generic code.
One current usage scenario is for the driver to request DSA to set up
802.1Q based switch tagging for its ports.
Signed-off-by: Vladimir Oltean <olteanv@...il.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
net/dsa/dsa2.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index c00ee464afc7..5beceb18b7e2 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -360,14 +360,14 @@ static int dsa_switch_setup(struct dsa_switch *ds)
if (err)
return err;
- err = ds->ops->setup(ds);
- if (err < 0)
- return err;
-
err = dsa_switch_register_notifier(ds);
if (err)
return err;
+ err = ds->ops->setup(ds);
+ if (err < 0)
+ return err;
+
if (!ds->slave_mii_bus && ds->ops->phy_read) {
ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
if (!ds->slave_mii_bus)
--
2.17.1
Powered by blists - more mailing lists