[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190409002452.14551-13-megous@megous.com>
Date: Tue, 9 Apr 2019 02:24:51 +0200
From: megous@...ous.com
To: linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Ondrej Jirman <megous@...ous.com>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Mark Rutland <mark.rutland@....com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Arend van Spriel <arend.vanspriel@...adcom.com>,
Franky Lin <franky.lin@...adcom.com>,
Hante Meuleman <hante.meuleman@...adcom.com>,
Chi-Hsien Lin <chi-hsien.lin@...ress.com>,
Wright Feng <wright.feng@...ress.com>,
Kalle Valo <kvalo@...eaurora.org>,
Naveen Gupta <naveen.gupta@...ress.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-wireless@...r.kernel.org,
brcm80211-dev-list.pdl@...adcom.com,
brcm80211-dev-list@...ress.com, linux-gpio@...r.kernel.org
Subject: [PATCH v2 12/13] [DO NOT MERGE] arm64: dts: allwinner: h6: Add MMC1 pins
From: Ondrej Jirman <megous@...ous.com>
MMC1 is used on some H6 boards we want to support. Typical use is 4-bit
SDIO interface with a WiFi chip. Add pin definitions for this use case.
Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 91fecab58836..76e20167438a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -238,6 +238,14 @@
bias-pull-up;
};
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
--
2.21.0
Powered by blists - more mailing lists