lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190409002452.14551-6-megous@megous.com>
Date:   Tue,  9 Apr 2019 02:24:44 +0200
From:   megous@...ous.com
To:     linux-sunxi@...glegroups.com,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>
Cc:     Ondrej Jirman <megous@...ous.com>, David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Mark Rutland <mark.rutland@....com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Arend van Spriel <arend.vanspriel@...adcom.com>,
        Franky Lin <franky.lin@...adcom.com>,
        Hante Meuleman <hante.meuleman@...adcom.com>,
        Chi-Hsien Lin <chi-hsien.lin@...ress.com>,
        Wright Feng <wright.feng@...ress.com>,
        Kalle Valo <kvalo@...eaurora.org>,
        Naveen Gupta <naveen.gupta@...ress.com>,
        dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
        linux-wireless@...r.kernel.org,
        brcm80211-dev-list.pdl@...adcom.com,
        brcm80211-dev-list@...ress.com, linux-gpio@...r.kernel.org
Subject: [PATCH v2 05/13] pinctrl: sunxi: Prepare for alternative bias voltage setting methods

From: Ondrej Jirman <megous@...ous.com>

H6 has a different I/O voltage bias setting method than A80. Prepare
existing code for using alternative bias voltage setting methods.

Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c |  2 +-
 drivers/pinctrl/sunxi/pinctrl-sunxi.c     | 41 +++++++++++++----------
 drivers/pinctrl/sunxi/pinctrl-sunxi.h     |  5 ++-
 3 files changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
index da37d594a13d..3aa210079b18 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
@@ -722,7 +722,7 @@ static const struct sunxi_pinctrl_desc sun9i_a80_pinctrl_data = {
 	.npins = ARRAY_SIZE(sun9i_a80_pins),
 	.irq_banks = 5,
 	.disable_strict_mode = true,
-	.has_io_bias_cfg = true,
+	.io_bias_cfg_variant = IO_BIAS_CFG_V1,
 };
 
 static int sun9i_a80_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 8dd25caea2cf..b8dd58ef33b7 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -610,7 +610,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	u32 val, reg;
 	int uV;
 
-	if (!pctl->desc->has_io_bias_cfg)
+	if (!pctl->desc->io_bias_cfg_variant)
 		return 0;
 
 	uV = regulator_get_voltage(supply);
@@ -621,23 +621,28 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	if (uV == 0)
 		return 0;
 
-	/* Configured value must be equal or greater to actual voltage */
-	if (uV <= 1800000)
-		val = 0x0; /* 1.8V */
-	else if (uV <= 2500000)
-		val = 0x6; /* 2.5V */
-	else if (uV <= 2800000)
-		val = 0x9; /* 2.8V */
-	else if (uV <= 3000000)
-		val = 0xA; /* 3.0V */
-	else
-		val = 0xD; /* 3.3V */
-
-	pin -= pctl->desc->pin_base;
-
-	reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
-	reg &= ~IO_BIAS_MASK;
-	writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+	if (pctl->desc->io_bias_cfg_variant == IO_BIAS_CFG_V1) {
+		/*
+		 * Configured value must be equal or greater to actual
+		 * voltage.
+		 */
+		if (uV <= 1800000)
+			val = 0x0; /* 1.8V */
+		else if (uV <= 2500000)
+			val = 0x6; /* 2.5V */
+		else if (uV <= 2800000)
+			val = 0x9; /* 2.8V */
+		else if (uV <= 3000000)
+			val = 0xA; /* 3.0V */
+		else
+			val = 0xD; /* 3.3V */
+
+		pin -= pctl->desc->pin_base;
+
+		reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
+		reg &= ~IO_BIAS_MASK;
+		writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+	}
 
 	return 0;
 }
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index ee15ab067b5f..642f667e99d2 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -95,6 +95,9 @@
 #define PINCTRL_SUN7I_A20	BIT(7)
 #define PINCTRL_SUN8I_R40	BIT(8)
 
+/* Bias voltage configuration done via Pn_GRP_CONFIG registers. */
+#define IO_BIAS_CFG_V1		1
+
 struct sunxi_desc_function {
 	unsigned long	variant;
 	const char	*name;
@@ -117,7 +120,7 @@ struct sunxi_pinctrl_desc {
 	const unsigned int		*irq_bank_map;
 	bool				irq_read_needs_mux;
 	bool				disable_strict_mode;
-	bool				has_io_bias_cfg;
+	int				io_bias_cfg_variant;
 };
 
 struct sunxi_pinctrl_function {
-- 
2.21.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ