[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190411101951.30223-9-megous@megous.com>
Date: Thu, 11 Apr 2019 12:19:48 +0200
From: megous@...ous.com
To: linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Ondrej Jirman <megous@...ous.com>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Mark Rutland <mark.rutland@....com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Arend van Spriel <arend.vanspriel@...adcom.com>,
Franky Lin <franky.lin@...adcom.com>,
Hante Meuleman <hante.meuleman@...adcom.com>,
Chi-Hsien Lin <chi-hsien.lin@...ress.com>,
Wright Feng <wright.feng@...ress.com>,
Kalle Valo <kvalo@...eaurora.org>,
Naveen Gupta <naveen.gupta@...ress.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-wireless@...r.kernel.org,
brcm80211-dev-list.pdl@...adcom.com,
brcm80211-dev-list@...ress.com, linux-gpio@...r.kernel.org
Subject: [PATCH v3 08/11] arm64: dts: allwinner: orange-pi-3: Enable HDMI output
From: Ondrej Jirman <megous@...ous.com>
Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC
I2C bus voltage shifter. Before EDID can be read, we need to pull PH2 high.
Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 6d6b1f66796d..58a6635c909e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -22,6 +22,18 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+ ddc-supply = <®_ddc>;
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -37,6 +49,15 @@
};
};
+ reg_ddc: ddc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "ddc-io";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ };
+
reg_vcc5v: vcc5v {
/* board wide 5V supply directly from the DC jack */
compatible = "regulator-fixed";
@@ -72,6 +93,10 @@
cpu-supply = <®_dcdca>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -91,6 +116,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
--
2.21.0
Powered by blists - more mailing lists