[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190411102633.3685-1-mcroce@redhat.com>
Date: Thu, 11 Apr 2019 12:26:31 +0200
From: Matteo Croce <mcroce@...hat.com>
To: netdev@...r.kernel.org
Cc: Sunil Goutham <sgoutham@...ium.com>,
Robert Richter <rric@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
Ilias Apalodimas <ilias.apalodimas@...aro.org>,
Jesper Dangaard Brouer <brouer@...hat.com>,
David Miller <davem@...emloft.net>
Subject: [PATCH v3 0/2] Fix thunderx MTU with XDP
The thunderx driver can't use XDP with all MTU values.
This patches sets the right MTU values, and add a check to avoid setting
a wrong value which will not function.
v3: Fix a copy-paste from two functions, tested on proper hardware:
# ip link show dev enP2p1s0v0
2: enP2p1s0v0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 1c:1b:0d:0d:52:a4 brd ff:ff:ff:ff:ff:ff
# ip link set enP2p1s0v0 mtu 1800
# ip link set dev enP2p1s0v0 xdpdrv object mtu.o
[ 787.019730] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1800.
RTNETLINK answers: Operation not supported
# ip link set enP2p1s0v0 mtu 1500
# ip link set dev enP2p1s0v0 xdpdrv object mtu.o
[ 800.574568] nicvf 0002:01:00.1 enP2p1s0v0: Link is Up 10000 Mbps Full duplex
# ip link set enP2p1s0v0 mtu 1600
[ 807.248321] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1500.
RTNETLINK answers: Invalid argument
Matteo Croce (2):
net: thunderx: raise XDP MTU to 1508
net: thunderx: don't allow jumbo frames with XDP
.../net/ethernet/cavium/thunder/nicvf_main.c | 22 +++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
--
2.21.0
Powered by blists - more mailing lists