lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190423151143.464992-2-arnd@arndb.de>
Date:   Tue, 23 Apr 2019 17:11:33 +0200
From:   Arnd Bergmann <arnd@...db.de>
To:     Karsten Keil <isdn@...ux-pingi.de>, netdev@...r.kernel.org
Cc:     isdn4linux@...tserv.isdn4linux.de, Paul Bolle <pebolle@...cali.nl>,
        Holger Schurig <holgerschurig@...glemail.com>,
        Tilman Schmidt <tilman@...p.cc>,
        Al Viro <viro@...iv.linux.org.uk>,
        gigaset307x-common@...ts.sourceforge.net,
        Arnd Bergmann <arnd@...db.de>
Subject: [PATCH 1/5] isdn: gigaset: remove i4l support

isdn4linux is getting removed, and the gigaset driver can still
use the CAPI support, so this can all go away.

Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
 Documentation/isdn/README.gigaset |  36 +-
 drivers/isdn/gigaset/Kconfig      |  22 +-
 drivers/isdn/gigaset/Makefile     |   5 +-
 drivers/isdn/gigaset/dummyll.c    |  77 ----
 drivers/isdn/gigaset/i4l.c        | 695 ------------------------------
 5 files changed, 10 insertions(+), 825 deletions(-)
 delete mode 100644 drivers/isdn/gigaset/dummyll.c
 delete mode 100644 drivers/isdn/gigaset/i4l.c

diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 9b1ce277ca3d..f6184b637182 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -48,9 +48,8 @@ GigaSet 307x Device Driver
 
 1.2. Software
      --------
-     The driver works with the Kernel CAPI subsystem as well as the old
-     ISDN4Linux subsystem, so it can be used with any software which is able
-     to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data).
+     The driver works with the Kernel CAPI subsystem and can be used with any
+     software which is able to use CAPI 2.0 for ISDN connections (voice or data).
 
      There are some user space tools available at
      https://sourceforge.net/projects/gigaset307x/
@@ -92,7 +91,7 @@ GigaSet 307x Device Driver
 	gigaset	 	debug	   debug level (see section 3.2.)
 
 			startmode  initial operation mode (see section 2.5.):
-	bas_gigaset )		   1=ISDN4linux/CAPI (default), 0=Unimodem
+	bas_gigaset )		   1=CAPI (default), 0=Unimodem
 	ser_gigaset )
 	usb_gigaset )	cidmode    initial Call-ID mode setting (see section
 				   2.5.): 1=on (default), 0=off
@@ -154,18 +153,10 @@ GigaSet 307x Device Driver
 
 2.3. CAPI
      ----
-     If the driver is compiled with CAPI support (kernel configuration option
-     GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the
-     corresponding driver module is loaded, and can then be used with CAPI 2.0
-     kernel and user space applications. For user space access, the module
-     capi.ko must be loaded.
-
-     Legacy ISDN4Linux applications are supported via the capidrv
-     compatibility driver. The kernel module capidrv.ko must be loaded
-     explicitly with the command
-        modprobe capidrv
-     if needed, and cannot be unloaded again without unloading the driver
-     first. (These are limitations of capidrv.)
+     The devices will show up as CAPI controllers as soon as the
+     corresponding driver module is loaded, and can then be used with
+     CAPI 2.0 kernel and user space applications. For user space access,
+     the module capi.ko must be loaded.
 
      Most distributions handle loading and unloading of the various CAPI
      modules automatically via the command capiinit(1) from the capi4k-utils
@@ -173,16 +164,6 @@ GigaSet 307x Device Driver
      Gigaset drivers because it doesn't support more than one module per
      driver.
 
-2.4. ISDN4Linux
-     ----------
-     If the driver is compiled without CAPI support (native ISDN4Linux
-     variant), it registers the device with the legacy ISDN4Linux subsystem
-     after loading the module. It can then be used with ISDN4Linux
-     applications only. Most distributions provide some configuration utility
-     for setting up that subsystem. Otherwise you can use some HOWTOs like
-         http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-
-
 2.5. Unimodem mode
      -------------
      In this mode the device works like a modem connected to a serial port
@@ -281,8 +262,7 @@ GigaSet 307x Device Driver
      number. Dialing "***" (three asterisks) calls all extensions
      simultaneously (global call).
 
-     This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode
-     does not support internal calls.
+     Unimodem mode does not support internal calls.
 
 2.8. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig
index 83f62b8d82b5..805b5d034feb 100644
--- a/drivers/isdn/gigaset/Kconfig
+++ b/drivers/isdn/gigaset/Kconfig
@@ -1,6 +1,7 @@
 menuconfig ISDN_DRV_GIGASET
 	tristate "Siemens Gigaset support"
 	depends on TTY
+	depends on ISDN_CAPI
 	select CRC_CCITT
 	select BITREVERSE
 	help
@@ -17,27 +18,6 @@ menuconfig ISDN_DRV_GIGASET
 
 if ISDN_DRV_GIGASET
 
-config GIGASET_CAPI
-	bool "Gigaset CAPI support"
-	depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
-	default 'y'
-	help
-	  Build the Gigaset driver as a CAPI 2.0 driver interfacing with
-	  the Kernel CAPI subsystem. To use it with the old ISDN4Linux
-	  subsystem you'll have to enable the capidrv glue driver.
-	  (select ISDN_CAPI_CAPIDRV.)
-	  Say N to build the old native ISDN4Linux variant.
-	  If unsure, say Y.
-
-config GIGASET_I4L
-	bool
-	depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
-	default !GIGASET_CAPI
-
-config GIGASET_DUMMYLL
-	bool
-	default !GIGASET_CAPI&&!GIGASET_I4L
-
 config GIGASET_BASE
 	tristate "Gigaset base station support"
 	depends on USB
diff --git a/drivers/isdn/gigaset/Makefile b/drivers/isdn/gigaset/Makefile
index ac45a2739f56..f8ba14735bf1 100644
--- a/drivers/isdn/gigaset/Makefile
+++ b/drivers/isdn/gigaset/Makefile
@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o
-gigaset-$(CONFIG_GIGASET_CAPI) += capi.o
-gigaset-$(CONFIG_GIGASET_I4L) += i4l.o
-gigaset-$(CONFIG_GIGASET_DUMMYLL) += dummyll.o
+gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o capi.o
 usb_gigaset-y := usb-gigaset.o
 ser_gigaset-y := ser-gigaset.o
 bas_gigaset-y := bas-gigaset.o isocdata.o
diff --git a/drivers/isdn/gigaset/dummyll.c b/drivers/isdn/gigaset/dummyll.c
deleted file mode 100644
index 570c2d53b84e..000000000000
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
deleted file mode 100644
index b5b389e95edd..000000000000
-- 
2.20.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ